پیوندهای مفید
آمار
| تعداد نشریات | 9 |
| تعداد شمارهها | 448 |
| تعداد مقالات | 5,741 |
| تعداد مشاهده مقاله | 8,100,360 |
| تعداد دریافت فایل اصل مقاله | 6,589,678 |
افزایش پهنای باند بسامدی جاذبهای صوتی چندلایه تخت متشکل از ماده متخلخل، صفحه سوراخدار و فاصلۀ هوایی | ||
| نشریه مهندسی مکانیک امیرکبیر | ||
| مقاله 19، دوره 50، شماره 1، فروردین و اردیبهشت 1397، صفحه 219-230 اصل مقاله (1.25 M) | ||
| نوع مقاله: مقاله پژوهشی | ||
| شناسه دیجیتال (DOI): 10.22060/mej.2017.12042.5247 | ||
| نویسندگان | ||
| محسن بروغنی1؛ صابر صفار2؛ صدیقه بصیرجعفری* 3 | ||
| 1مهندسی صدا، دانشکده فنی و مهندسی، دانشگاه صدا و سیما، تهران، ایران | ||
| 2مهندسی مکانیک، دانشکده فنی و مهندسی، دانشگاه صداوسیما، تهران، ایران | ||
| 3فیزیک، دانشکده فنی و مهندسی، دانشگاه صداوسیما، تهران، ایران | ||
| چکیده | ||
| چکیده: امروزه جاذبهایی که نوفه را در پهنای وسیعی از بسامدها جذب کنند و نیز کمترین فضا را در سازه بهخود اختصاص دهند، بسیار مورد توجه است. در این مقاله با استفاده از ترکیب مادۀ متخلخل، صفحۀ سوراخدار و فاصلۀ هوایی، چهار نمونه اولیه پیشنهاد شده و در ادامه به منظور افزایش میزان و پهنای باند جذب صوتی، مشخصههای نمونهای که بیشترین جذب صوتی را داشته، استخراج شده است. برای بررسی عملکرد جذب صوتی ساختارهای ارائه شده از روش ماتریس تبدیل و روش اجزا محدود استفاده شده است. برای صحهگذاری مدل ریاضی و نتایج روش اجزا محدود، نتایج نظری و تجربی برای دو نمونۀ مختلف از جاذب مرکب مقایسه شدهاند که تطابق مناسبی را نشان م یدهند. نتایج نشان میدهند که میانگین ضریب جذب صوتی مدل بهبود یافته، با ضخامت نهایی 51 میلیمتر در گسترۀ بسامدی 9/ 0، Hz – 6000 Hz 1 است که نسبت به ساختارهای ارائه شده در کارهای گذشته، بدون افزایش ضخامت کلی، % 5 بهبود در میزان جذب دارد. به عبارتی، با ضخامت کمتری به همان ضریب جذب متداول در ساختارهای موجود در صنعت می توان دست یافت و این امر از نظر مهندسی بسیار مهم است؛ چون فضای کمتری اشغال می شود و هزینه اجرا نیز کاهش می یابد. | ||
| کلیدواژهها | ||
| ضریب جذب صوتی؛ جاذب مرکب؛ روش ماتریس تبدیل؛ شبیهسازی اجزای محدود؛ صفحه سوراخدار | ||
| عنوان مقاله [English] | ||
| Increasing the Frequency Band of Sound Absorption for Flat Multi-Layered Absorbers Consisting of Porous Material, Perforated Panel and Air-Gap | ||
| نویسندگان [English] | ||
| M. Broghany1؛ S. Saffar2؛ S. Basirjafari3 | ||
| 1Department of Acoustics and Audio Engineering, IRIB University, Tehran, Iran | ||
| 2Department of Acoustics and Audio Engineering, IRIB University, Tehran, Iran | ||
| 3Department of Acoustics and Audio Engineering, IRIB University, Tehran, Iran | ||
| چکیده [English] | ||
| Sound pollution, especially in metropolises, is a critical issue at the time being. Hence, appropriate sound absorbers which absorb higher noise in a wide range of frequencies are desirable especially when less occupied space is needed. In the present study, four primary models are proposed by combination of the porous material, micro-perforated panels and air gap. Afterwards, sound absorption coefficient was maximized in every proposed model by employing both analytical approach (transfer matrix method) and finite element method (by COMSOL Multi-physics version 4.4). Verification has been carried out by comparison with the theoretical and experimental results of previous studies. The results showed well agreement between present and previous results. Consequently, an optimized model by maximum sound absorption coefficient was proposed. The proposed model showed the average of sound absorption coefficient equal to 0.9 which is approximately 5% more than previous studies in the frequency range of 1 to 6000 Hz for 51 mm thickness of panel. In other words, the presented structure, with a less thickness has the same sound absorption coefficient of the commercial industrial structures. This is very important in terms of engineering because the presented sound absorber takes up less space and also, running costs are reduced. | ||
| کلیدواژهها [English] | ||
| Sound absorption coefficient, Composite absorber, Transfer matrix method, finite element method, Perforated panel | ||
|
سایر فایل های مرتبط با مقاله
|
||
| مراجع | ||
|
[1] S. Saffar, A. Abdullah, Determination of acoustic impedances of multi matching layers for narrowband ultrasonic airborne transducers at frequencies< 2.5 MHz–Application of a genetic algorithm, Ultrasonics, 52(1) (2012) 169-185. [2] S. Saffar, A. Abdullah, R. Othman, Influence of the thickness of matching layers on narrow band transmitter ultrasonic airborne transducers with frequencies< 100 kHz: Application of a genetic algorithm, Applied Acoustics, 75 (2014) 72-85. [3] J.M. Kim, D.H. Kim, J. Kim, J.W. Lee, W.N. Kim, Effect of graphene on the sound damping properties of flexible polyurethane foams, Macromolecular Research, 25(2) (2017) 190-196. [4] H. Bahrambeygi, A. Rabbi, K. Nasouri, A.M. Shoushtari, M.R. Babaei, Morphological and structural developments in nanoparticles polyurethane foam nanocomposite's synthesis and their effects on mechanical properties, Advances in Polymer Technology, 32(S1) (2013). [5] S. Basirjafari, R. Malekfar, S. Esmaielzadeh Khadem, Low loading of carbon nanotubes to enhance acoustical properties of poly (ether) urethane foams, Journal of Applied Physics, 112(10)(2012) 104312. [6] M. Broghany, S. Basirjafari, S. Saffar, Optimization of flat multi-layer sound absorber by using multiobjective genetic algorithm for applicationin anechoic chamber, Modares Mechanical Engineering, 16(2) (2016) 215-222. (in Persian) [7] M. Dah-You, Theory and design of microperforated panel sound-absorbing constructions, Scientia Sinica, 18(1) (1975) 55-71. [8] D.-Y. Maa, Microperforated-panel wideband absorbers, Noise Control Engineering J., 29 (1987) 77-84. [9] D.-Y. Maa, Potential of microperforated panel absorber, the Journal of the Acoustical Society of America, 104(5) 1998) 2861-2866. [10] X.-j. ZHANG, X.-d. ZHAO, Multilayer Micro Perforated Panel Optimization Design [J], Audio Engineering, 2 (2008) 024. [11] L. Lei, W. Zuomin, J. Zaixiu, Effect of soundabsorbing material on a microperforated absorbing construction, Chinese Journal of Acoustics, 30(2)(2011) 191-202. [12] D. Borelli, C. Schenone, I. Pittaluga, Analysis of sound absorption behaviour of polyester fibre material faced with perforated panels, in:Proceedings of Meetings on Acoustics ICA2013,ASA, 2013, pp. 015045. [13] D. Li, D. Chang, B. Liu, J. Tian, Improving sound absorption bandwidth of micro-perforated panel by adding porous materials, in: INTERNOISE and NOISE-CON Congress and Conference Proceedings, Institute of Noise Control Engineering, 2014, pp. 1877-1882. [14] Y. Qian, D. Kong, Y. Liu, S. Liu, Z. Li, D. Shao, S. Sun, Improvement of sound absorption characteristics under low frequency for microperforated panel absorbers using super-aligned carbon nanotube arrays, Applied Acoustics, 82(2014) 23-27. [15] X. Zhao, X. Fan, Enhancing low frequency sound absorption of micro-perforated panel absorbers by using mechanical impedance plates, Applied Acoustics, 88 (2015) 123-128. [16] S.-H. Park, Acoustic properties of microperforated panel absorbers backed by Helmholtz resonators for the mprovement of low-frequency sound absorption, Journal of Sound and Vibration, 332(20) (2013) 4895-4911. [17] H. Ruiz, P. Cobo, F. Jacobsen, Optimization of multiple-layer microperforated panels by simulated annealing, Applied Acoustics, 72(10) (2011) 772-776. [18] K. Sakagami, Y. Fukutani, M. Yairi, M. Morimoto, Sound absorption characteristics of a double-leaf structure with an MPP and a permeable membrane,Applied Acoustics, 76 (2014) 28-34. [19] M. Delany, E. Bazley, Acoustical properties of fibrous absorbent materials, Applied acoustics, 3(2) (1970) 105-116. [20] Y. Miki, Acoustical properties of porous materialsgeneralizations of empirical models, Journal of the Acoustical Society of Japan (E), 11(1) (1990) 25-28. [21] N. Voronina, Acoustic properties of fibrous materials, Applied Acoustics, 42(2) (1994) 165-174. [22] T. Komatsu, Improvement of the Delany-Bazley and Miki models for fibrous sound-absorbing materials, Acoustical science and technology, 29(2)(2008) 121-129. [23] W. Qunli, Empirical relations between acoustical properties and flow resistivity of porous plastic open-cell foam, Applied acoustics, 25(3) (1988)141-148. [24] J.F. Allard, Y. Champoux, New empirical equations for sound propagation in rigid frame fibrous materials, The Journal of the Acoustical Society of America, 91(6) (1992) 3346-3353. [25] P.W. Jones, N.J. Kessissoglou, Simplification of the Delany–Bazley approach for modelling the acoustic properties of a poroelastic foam, Applied Acoustics, 88 (2015) 146-152. [26] D. Oliva, V. Hongisto, Sound absorption of porous materials–Accuracy of prediction methods, Applied Acoustics, 74(12) (2013) 1473-1479. [27] S. Liu, W. Chen, Y. Zhang, Design optimization of porous fibrous material for maximizing absorption of sounds under set frequency bands, Applied Acoustics, 76 (2014) 319-328. [28] M. Zainulabidin, M. Rani, N. Nezere, A.M. Tobi, Optimum sound absorption by materials fraction combination, International Journal of Mechanical & Mechatronics Engineering, 14(2) (2014) 118- 121. [29] V. Dabbagh, R. Keshavarz, A. Ohadi, Accurate Designing of Flat-Walled Multi-Layered Lining System Using Genetic Algorithm for Application in Anechoic Chambers, in: ASME 2012 Noise Control and Acoustics Division Conference at InterNoise 2012, American Society of Mechanical Engineers, 2012, pp. 227-235. [30] Y. Wang, C. Zhang, L. Ren, M. Ichchou, M.-A. Galland, O. Bareille, Sound absorption of a new bionic multi-layer absorber, Composite Structures,108 (2014) 400-408. | ||
|
آمار تعداد مشاهده مقاله: 1,359 تعداد دریافت فایل اصل مقاله: 1,564 |
||
