پیوندهای مفید
آمار
| تعداد نشریات | 8 |
| تعداد شمارهها | 439 |
| تعداد مقالات | 5,660 |
| تعداد مشاهده مقاله | 7,737,059 |
| تعداد دریافت فایل اصل مقاله | 6,363,628 |
Identification Effect of Nanoclay on Engineering Properties of Asphalt Mixtures | ||
| AUT Journal of Modeling and Simulation | ||
| مقاله 7، دوره 41، شماره 1، تیر 2009، صفحه 49-57 اصل مقاله (447.64 K) | ||
| نوع مقاله: Research Article | ||
| شناسه دیجیتال (DOI): 10.22060/miscj.2009.227 | ||
| نویسندگان | ||
| Saeed Ghaffarpour Jahromi؛ Ali Khodaii | ||
| چکیده | ||
| Nanoclays are new generation of processed clays of interest in a wide range of high performance composites. In other words, nanoclay is defined as a clay that can be modified to make the clay complexes compatible with organic monomers and polymers. Here, it can be said that the polymeric nanocomposites are among the most exciting and promising classes of materials discovered recently. A number of physical properties are enhanced successfully when a polymer is modified with small amount of nanoclay on condition that the clay is dispersed at nanoscopic level. This research has accomplished a comparative rheological test on binders as well as a mechanical test on asphalt mixtures containing unmodified and nanoclay modified bitumen. For that matter, two types of nanoclay were used: Nanofil-15 and Cloisite-15A. While, the rheological test on binder were penetration, softening point, ductility and aging effect, mechanical test on asphalt mixture were marshal stability, indirect tensile strength, resilient modulus, diametric fatigue and dynamic creep test. Test results show that, nanoclay can improve properties like stability, resilient modulus and indirect tensile strength and possess better behavior compared with unmodified bitumen under dynamic creep although it does not seem to have beneficial effect on fatigue behavior in low temperature. Optimum binder content and void in total mixture (VTM) increase by adding nanoclay to bitumen | ||
| کلیدواژهها | ||
| Asphalt Mixture؛ Bitumen Modifies؛ Nanoclay؛ Mechanical Properties | ||
| عنوان مقاله [English] | ||
| Identification Effect of Nanoclay on Engineering Properties of Asphalt Mixtures | ||
| چکیده [English] | ||
| Nanoclays are new generation of processed clays of interest in a wide range of high performance composites. In other words, nanoclay is defined as a clay that can be modified to make the clay complexes compatible with organic monomers and polymers. Here, it can be said that the polymeric nanocomposites are among the most exciting and promising classes of materials discovered recently. A number of physical properties are enhanced successfully when a polymer is modified with small amount of nanoclay on condition that the clay is dispersed at nanoscopic level. This research has accomplished a comparative rheological test on binders as well as a mechanical test on asphalt mixtures containing unmodified and nanoclay modified bitumen. For that matter, two types of nanoclay were used: Nanofil-15 and Cloisite-15A. While, the rheological test on binder were penetration, softening point, ductility and aging effect, mechanical test on asphalt mixture were marshal stability, indirect tensile strength, resilient modulus, diametric fatigue and dynamic creep test. Test results show that, nanoclay can improve properties like stability, resilient modulus and indirect tensile strength and possess better behavior compared with unmodified bitumen under dynamic creep although it does not seem to have beneficial effect on fatigue behavior in low temperature. Optimum binder content and void in total mixture (VTM) increase by adding nanoclay to bitumen | ||
| کلیدواژهها [English] | ||
| Asphalt Mixture, Bitumen Modifies, Nanoclay, Mechanical Properties | ||
| مراجع | ||
|
[1] Pinnavaia T.J. and G.W.Beall, (2000) "Polymer–Clay Nanocomposites", John Wiley and Sons Ltd, England.
[2] Grim, R. E. (1959). "Physicao-Chemical Properties of Soils: Clay Minerals", Journal of the Soil Mechanics and Foundations Division, ASCE, Vol. 85, No. SM2, 1-17.
[3] Lan T, Kaviratna PD, Pinnavaia TJ. (1995), "Mechanism of clay tactoid exfoliation in epoxy–clay nanocomposites", Chem Mater ;7, 2144–50.
[4] Theng B. (2006), "Formation and properties of clay-polymer complexes", Elsevier; 1979.
[5] "Southern Clay Products" (2006), Inc. <Website, http://www.nanoclay.com/faqs.asp>.
Nguyen QT, Baird DG. (2007), "Process for increasing the exfoliation and dispersion of nanoclay particles into polymer | ||
|
آمار تعداد مشاهده مقاله: 2,765 تعداد دریافت فایل اصل مقاله: 2,362 |
||