A Novel Active Filter for Mitigation of EMI and Other Adverse Effects of PWM Inverter-Fed AC Motor

[1]     G.L. Skibinski, R.J. Kerkman, and D. Schlegel, “EMI emissions of modern PWM AC drives. IEEE Industry Applications Magazine”, vol. 5, no. 6, pp. 47-81, 1999.

[2]     J. C. Crebier and J. P. Ferrieux, “PFC full bridge rectifiers EMI modeling and analysis-common mode disturbance reduction”, IEEE Transactions on Power Electronics, vol. 19, no. 2, pp. 378 –387, 2004.

[3]     M.R. Baiju, K.K. Mohapatra and R.S. Kanchan, “A dual two-level inverter scheme with common mode voltage elimination for an induction motor drive”, IEEE Transactions on Power Electronics, vol. 19, no. 3 pp. 794 – 805, 2004.

[4]     S. Wei, N. Zargari, and B. Wu, “Comparison and mitigation of common mode voltage in power converter topologies”, IEEE 39th Industry Applications conference, vol. 3, pp. 1852 – 1857, 2004.

[5]     J. Adabi, F. Zare, G.F. Ledwich, A. Ghosh, “Leakage current and common mode voltage issues in modern AC drive systems”, In proc. of Australasian Universities power engineering conference, pp. 641-646, 2007

[6]     A. Muetze, and A. Binder, “Calculation of circulating bearing currents in machines of inverter-based drive systems”, 39th IEEE Annual Meeting, Industry Applications Conference, vol. 2, pp. 720-726, 2004.

[7]     D. Hyypio, “Mitigation of bearing electro-erosion of inverter-fed motors through passive common-mode voltage suppression”, IEEE Transactions on Industry Applications, vol. 41, no. 2, pp. 576-583, 2005.

[8]     C. Mei, J.C. Balda and W.P. Waite, “Minimization and cancellation of common-mode currents, shaft voltages and bearing currents for induction motor drives”, IEEE 34th Annual Power Electronics Specialist Conference, vol. 3, pp. 1127-1132, 2003.

[9]     R. Naik, T.A. Nondahl, and M.J, Melfi, “Circuit model for shaft voltage prediction in induction motors fed by PWM-based AC drives”, IEEE Transactions on Industry Applications, vol. 39, no. 5, pp. 1294-1299, 2003.

[10]  R. Naik, T.A. Nondahl, and M.J. Melfi, “Distributed parameter circuit model for shaft voltage prediction in induction motors fed by PWM based AC drives”, 36th Annual Meeting Industry Applications Conference, vol. 2, pp. 1118-1122, 2001.

[11]  Y. Lai, P. Chen, and H. Lee, “Optimal common-mode voltage reduction PWM technique for inverter control with consideration of the dead-time effects-part II applications to IM drives with diode front end”, IEEE Transactions on Industry Applications”, vol. 40, no. 6, pp. 1613-1620, 2004.

[12]  R.S. Kanchan, P.N. Tekwani, and M.R. Baiju, “Three-level inverter configuration with common-mode voltage elimination for induction motor drive”, IEE Proceedings-Electric Power Applications, vol. 152, no. 2, pp.  261-270, 2005.

[13]  J. Drinovsky, J. Svacina, and Z. Raida, “Potential Worst-case System for Testing EMI Filters Tested on Simple Filter Models”,  Radio engineering, Vol. 17, No. 3, pp. 15-18, 2008.

[14]  B. Mirafzal, G. Skibinski, and R. Tallam, “Determination of parameters in the universal induction motor model,” IEEE Transactions on Industry Applications, vol.45, pp. 142 - 151, January /February 2009.

[15]  SABER, Analogy, Inc., 9205 S.W. Gemini Drive, Beaverton, OR 97008, USA, release 5.1 edition.

[16]  A. Esmaeli and L. Sun, “Modeling and simulation of induction motor drive system to investigate and mitigate of PWM inverter’s adverse effects”,  Journal of Harbin Institute of Technology, vol. 14, No. 1, pp. 83-88, 2007.

[17]  Agilent 4285A, Precision LCR Meter Data Sheet.

[18]  X. Chen, D. Xu, F. Liu and J. Zhang, “A Novel Inverter-output passive filter for reducing both different and common dv/dt at the motor terminals in PWM drive system”,IEEE Transaction on Industrial electronics, vol. 54, pp. 419-426, 2007.

[19]  C. Khun, V. Tarateeraseth, W. Khan-ngern, Masaaki Kando,” A simplified active Input EMI filter of common-mode voltage cancellation for induction motor drive” Proceedings of the ECTI International Conference (ECTI-CON 2007), pp. 93-96,  2007