Calibration of Safety Factor for Micropile in Transmission Tower Foundations Based on Relative Reliability Approach

[1] K. Ashouri, M. Dousti, A novel approach in execution of transmission lines with focus on decreasing the total cost, in: 22nd International Power System Conference, [In Persian] Iran, Tehran, 2007.

[2] A.-A. Zekavati, A. Khodaverdian, M.-A. Jafari, A. Hosseini, Investigating performance of micropiled raft in foundation of power transmission line towers in cohesive soil: experimental and numerical study, Canadian Geotechnical Journal, 55(3) (2017) 312-328.

[3] E. Abraham, C.H. Chen, P.L. Hlapcich, D.E. Johnson, N.W. Jufer, N.G. Salisbury, H. Shaw, Micropile transmission foundation in environmentally sensitive, challenging terrain, Deep Foundation Institute,2010.

[4] H.J. Wang, Research on micropile foundation of transmission tower on soft soil area, in: fifth International Conference on Civil, Architectural and Hydraulic Engineering (ICCAHE), 2016, pp. 574-579.

[5] K.K. Phoon, J. Ching, Risk and reliability in geotechnical engineering, CRC Press, 2014.

[6] K.K. Phoon, J.V. Retief, Reliability of geotechnical structures in ISO2394, in, CRC Press, 2016, pp. Chap. 5.

[7] G.B. Baecher, J.T. Christian, Reliability and statistics in geotechnical engineering, John Wiley & Sons, 2005.

[8] J.M. Duncan, Factors of safety and reliability in geotechnical engineering, Journal of geotechnical and geoenvironmental engineering, 126(4) (2000) 307-316.

[9] [9] T.M. Allen, Development of geotechnical resistance factors and downdrag load factors for LRFD foundation strength limit state design, in: US Department of Transportation, Federal Highway Administration, 2005.

[10] K.K. Phoon, Towards reliability-based design for geotechnical engineering, Special lecture for Korean Geotechnical Society, Seoul, 2004.

[11] Y.L. Zhao, W.G. An, Reliability-Based Stability Analysis of Foundation Pit Supported by Micro-Pile Composite Soil Nailing, in: Advanced Materials Research, Trans Tech Publ, 2011, pp. 2829-2833.

[12] Z. Luo, C.H. Juang, Efficient reliability-based design of drilled shafts in sand considering spatial variability, Journal of GeoEngineering, 7(2) (2012) 59-68.

[13] K. Phoon, J. Retief, J. Ching, M. Dithinde, T. Schweckendiek, Y. Wang, L. Zhang, Some observations on ISO2394: 2015 Annex D (Reliability of Geotechnical Structures) Structural Safety 62: 24-33 Crossref, Google Scholar, (2016).

[14] R. Jamshidi Chenari, R. Oloomi Dodaran, New method for estimation of the scale of fluctuation of geotechnical properties in natural deposits, Computational Methods in Civil Engineering, 1(1) (2010) 55-64.

[15] F. Nadim, Y.J. Choi, S. Lacasse, Calibration of partial safety factors for foundation design of offshore installations, in: Safety, Reliability, Risk and Life-Cycle Performance of Structures & Infrastructures, Taylor & Francis Group, London, 2013.

[16] J. Ching, K.-K. Phoon, Quantile value method versus design value method for calibration of reliability-based geotechnical codes, Structural Safety, 44 (2013) 47-58.

[17] K.K. Phoon, F.H. Kulhawy, M.D. Grigoriu, Reliability-based design of foundations for transmission line structures, EPRI Research Report TR-105000, Cornell University 1995.

[18] K.-K. Phoon, F.H. Kulhawy, M.D. Grigoriu, Reliability-based design for transmission line structure foundations, Computers and Geotechnics, 26(3) (2000) 169-185.

[19] K.K. Phoon, D.E. Becker, F.H. Kulhawy, Y. Honjo, N.K. Ovesen, S.R. Lo, Why consider reliability analysis for geotechnical limit state design, in: International Workshop on Limit State Design in Geotechnical Engineering Practice, 2003.

[20] K.-K. Phoon, F.H. Kulhawy, M.D. Grigoriu, Development of a reliability-based design framework for transmission line structure foundations, Journal of Geotechnical and Geoenvironmental Engineering, 129(9) (2003) 798-806.

[21] K.-K. Phoon, F.H. Kulhawy, M.D. Grigoriu, Multiple resistance factor design for shallow transmission line structure foundations, Journal of Geotechnical and Geoenvironmental Engineering, 129(9) (2003) 807-818.

[22] F.H. Kulhawy, K.K. Phoon, Observations of geotechnical reliability-based design development in North America, in: Foundation Design Codes and Soil Investigation in View of International Harmonization and Performance Based Design, IWS Kamakura, 2002, pp. 31-48.

[23] M.C. McVay, B. Birgisson, L. Zhang, A. Perez, S. Putcha, Load and resistance factor design (LRFD) for driven piles using dynamic methods—A Florida perspective, Geotechnical Testing Journal, 23(1) (2000) 55-66.

[24] S.G. Paikowsky, Load and resistance factor design (LRFD) for deep foundations, in: Foundation Design Codes and Soil Investigation in View of International Harmonization and Performance Based Design, IWS Kamakura, 2002, pp. 59-94.

[25] J. Zhang, L.-M. Zhang, W.H. Tang, Reliability based design of pile foundations considering both parameter and model uncertainties, Journal of GeoEngineering, 4(3) (2009) 119-127.

[26] K. Kwak, K.J. Kim, J. Huh, J.H. Lee, J.H. Park, Reliability-based calibration of resistance factors for static bearing capacity of driven steel pipe piles, Canadian Geotechnical Journal, 47(5) (2010) 528-538.

[27] H.-J. Kim, J.L. Mission, Probabilistic evaluation of economical factor of safety for the geotechnical design of pile axial load capacity, KSCE Journal of Civil Engineering, 15(7) (2011) 1167.

[28] D. Kim, M. Chung, K. Kwak, Resistance factor calculations for LRFD of axially loaded driven piles in sands, KSCE Journal of Civil Engineering, 15(7) (2011) 1185.

[29] J.H. Park, D. Kim, C.K. Chung, Implementation of Bayesian theory on LRFD of axially loaded driven piles, Computers and Geotechnics, 42 (2012) 73-80.

[30] J.H. Park, D. Kim, J.H. Lee, M. Chung, K. Kwak, LRFD implementation for static bearing capacity of driven piles, in: Safety, Reliability, Risk and Life-Cycle Performance of Structures & Infrastructures, Taylor & Francis Group, London, 2013.

[31] J. Jabo, Development of Reliability Based Design and Acceptance Protocol for Pile Foundations in Arkansas, GEO-RISK 2017, (2017) 277.

[32] F. Tonon, A. Mammino, Reliability-based design and construction issues for a micropile foundation in Costa Rica, Practice Periodical on Structural Design and Construction, 9(4) (2004) 227-236.

[33] A. Misra, L.A. Roberts, R. Oberoi, C.-H. Chen, Uncertainty analysis of micropile pullout based upon load test results, Journal of geotechnical and geoenvironmental engineering, 133(8) (2007) 1017-1025.

[34] FHWA, Micropile Design and Construction Guidelines, Federal Highway Administration, U.S Department of Transportation, U.S.A, 2005.

[35] C.J. Wong, Guidelines for Electrical Transmission Line Structural Loading, ASCE Task Committee on Structural Loading of the Committee on Electrical Transmission Structures, American Society of Civil Engineers, U.S.A, 2010.

[36] IEC, Design criteria of overhead transmission lines, in: CEI IEC 60826, CH-1211 Geneva 20, Switzerland, 2003.

[37] F. Paiva, J. Henriques, R.C. Barros, Review of Transmission Tower Testing Stations Around the World, Procedia Engineering, 57 (2013) 859-868.

[38] IEC, Loading tests on overhead line towers, in: CEI IEC 60652, CH-1211 Geneva 20, Switzerland, 2002.

[39] M.R. Ahmadi Golsefidi, F. Kalantari, Determination of bearing capacity and stiffness of micropiles using the loading tests results, in: 4th international Conference on Geotechnical Engineering and Soil Mechanics, [In Persian] Tehran, Iran, 2010.

[40] E. Ghannoum, Probabilistic design of transmission lines Part II: Design criteria corresponding to a target reliability, IEEE transactions on power apparatus and systems, (9) (1983) 3065-3079.

[41] A.W. Stuedlein, M.D. Gibson, G.E. Horvitz, Tension and compression micropile load tests in gravelly sand, in: 6th International Conference on case histories in Geotechnical engineering, VA, Arlington, 2008.

[42] J. Han, S.-L. Ye, A field study on the behavior of micropiles in clay under compression or tension, Canadian Geotechnical Journal, 43(1) (2006) 19-29.

[43] A.Y. Abd Elaziz, M.H. El Naggar, Geotechnical capacity of hollow-bar micropiles in cohesive soils, Canadian Geotechnical Journal, 51(10) (2014) 1123-1138.