پیوندهای مفید
آمار
| تعداد نشریات | 8 |
| تعداد شماره‌ها | 417 |
| تعداد مقالات | 5,494 |
| تعداد مشاهده مقاله | 6,136,893 |
| تعداد دریافت فایل اصل مقاله | 5,380,787 |
Experimental and Analytical Study of new Proposed Semi-rigid Concrete Bam-toColumn Connection | ||
| AUT Journal of Civil Engineering | ||
| مقاله 5، دوره 3، شماره 1، شهریور 2019، صفحه 49-60 اصل مقاله (1.87 M) | ||
| نوع مقاله: Research Article | ||
| شناسه دیجیتال (DOI): 10.22060/ajce.2018.14987.5511 | ||
| نویسندگان | ||
| R. Morshed؛ H.R. Shayegh؛ M.R. Mirjalili* | ||
| Department of Civil Engineering, Yazd University, Yazd, Iran | ||
| چکیده | ||
| A new semi-rigid concrete beam-column connection is proposed and its performance is investigated through experimental and analytical studies. In this connection, the beam dose not directly connect to column but it is connected with torsional link member. This scissor mechanism allows the beam to make rotation with respect to column. Moreover, the strengthened connections are also suggested to support higher levels of lateral deformations for structures located in high risk seismic areas. The connections behavior under cyclic loads has been studied experimentally using three types of specimens; i) basic specimen, ii) strengthened specimen with Carbon Fiber Reinforced Polymer (CFRP) wrapping, iii) strengthened specimen with steel core reinforcing. The results showed that for low levels of deformations, the basic connection exhibited acceptable performance but for higher levels of rotation, the strengthened specimens had significant merits in ductility and nonlinear characteristics. Beside the experimental tests, the numerical model of connection was constructed using ABAQUS program. The accuracy of modeling was verified through experimental results. To investigate the effect of using proposed semi-rigid connection in seismic demands of concrete structures, two rigid and semi-rigid three-story frames were modeled in OpenSees. Several nonlinear dynamic analyses were carried on models and the different global and local demands were compared. The results showed that in low-rise or non-sway buildings in which the lateral displacements are not very considerable, semi-rigid connections can lead to smaller seismic loads and consequently the economical and optimal design. | ||
| کلیدواژه‌ها | ||
| Concrete Semi-rigid Connection؛ Beam-to-column Connection؛ Torsion in Concrete Beams؛ Torsional Behavior؛ Torsional Connection | ||
| مراجع | ||
|
[1] W.F. Chen, N. Kishi, Semi-rigid steel beam-to-column connections: data base and modeling, Journal of Structural Engineering, 115 (1989) 105–19. [2] Y. Yu, X. Zhu, Nonlinear dynamic collapse analysis of semi-rigid steel frames based on the finite particle method, Engineering Structures., 118 (2016) 383-393.
[3] S. Akavci, Nonlinear analysis of semi-rigid frames with rigid end sections, Iranian Journal of Science & Technology, Transactions of Civil Engineering, 31 (2007) 567-571.
[4] J.G.S. Da Silva, L.R.O. de Lima, P.C.G. da S, S.A.L. de Andrade, R.A. de Castro, Nonlinear dynamic analysis of steel portal frames with semi-rigid connections, Engineering Structures, 30 (2008) 2566-2579.
[5] S. Elnashai, H. Mahmoud, The design and seismic performance of low-rise long-span frames with semi-rigid connections, Journal of Constructional Steel Research, 67 (2011) 114-126.
[6] K.H. Lien, Y.J. Chiou, P.A. Hsiao, Vector form intrinsic finite-element analysis of steel frames with semi-rigid joints, Journal of Structural Engineering, 38 (2012) 27–36.
[7] V. Vimonsatit, S. Tangaramvong, F. Tin-Loi, Second-order elastoplastic analysis of semirigid steel frames under cyclic loading, Engineering Structures, 45 (2012) 127–36.
[8] P.C. Nguyen, S.E. Kim, Nonlinear elastic dynamic analysis of space steel frames with semi-rigid connections, Journal of Constructional Steel Research, 84 (2013) 72–81.
[9] L. Xu, Second-order analysis for semirigid steel frame
[10] design, Canadian Journal of Civil Engineering., 28
[11] (2001) 59-76.
[12] M.N. Nader, A. Astaneh, Dynamic behavior of flexible, semirigid and rigid steel frames, Journal of Constructional Steel Research, 18 (1991) 179-192.
[13] A.S. Elnashai, A.Y. Elghazouli, seismic behavior of semi-rigid steel frames, Journal of Constructional Steel Research, 29 (1994) 149-174.
[14] M.N. Nader, A. Astaneh, Shaking Table tests of rigid, semirigid, and flexible steel frames, Journal of Structural Engineering, 122 (1996).
[15] J.Y.R. Liew, C.H. Yu, Y.H. Ng, N.E. Shanmugam, Testing of semi-rigid unbraced frames for calibration of second-order inelastis analysis, Journal of Constructional Steel Research, 41 (1997) 159-195.
[16] A.S. Elnashai, A.Y. Elghazouli, Response of semi rigid steel frames to cyclic and earthquake loads, Journal of Structural Engineering, 124 (1998) 124.
[17] Y. Goto, S. Miyashita, Classifcation system for rigid and semirigid connection, Journal of Structural Engineering, 124 (1998) 750-757.
[18] A. Loureiro, A. Moreno, R. Gutiérrez, J.M. Reinosa, Experimental and numerical analysis of three-dimensional semi-rigid steel joints under non-proportional loading, Engineering Structures, 38 (2012) 68–77.
[19] B. Gil, R. Goñi, E. Bayo, Experimental and numerical validation of a new design for three-dimensional semi-rigid composite joints, Engineering Structures, 48 (2013) 55-69.
[20] SSRC (Structural Stability Research Council), Connection Bibliography, Task Group 25, Bethlehem, PA, (1990).
[21] D.A. Nethercot, Steel beam-to-column connections, a review of test data and their applicability to the evaluation of the joint behaviour of the performance of steel frames, CIRIA Project Record, RP338, (1985).
[22] M.R. Mohammadizadeh, M.J. Fadaee, Experimental and analytical study on behaviour of CFRP-strengthened beams with minimum reinforcement under pure torsion, Iranian Journal of Science & Technology, Transactions of Civil Engineering, 34 (2005) 35-48.
[23] C.E. Chalioris, Experimental study of the torsion of reinforced concrete members, Structural Engineering and Mechanics, 23 (2006) 713-737.
[24] A.H. Khagehhosseini, R. Porhosseini, R. Morshed, A. Eslami, An experimental and numerical investigation on the effect of longitudinal reinforcements in torsional resistance of RC beams, Structural Engineering and Mechanics, 47 (2013).
[25] A.A. Majeed, A.A. Allawi, K.H. Chai, H.W. Wan Badaruzzam, Behavior of CFRP strengthened RC multicell box girders under torsion, Structural Engineering and Mechanics, 61 (2017) 397-406.
[26] American Concrete Institute, Building code requirements for structural concrete and commentary: ACI 318, Farmington Hills, MI, USA, (2014).
[27] American Concrete Institute, ACI Innovation Task Group 1 and Collaborators, Acceptance Criteria for Moment Frames Based on structural Testing and Commentary: ACI T1.1-01, (2001).
[28] A. Ganganagoudar, T.G. Mondal, S.S. Prakash, Analytical and finite element studies on behavior of FRP strengthened RC beams under torsion, Composite Structures, 153 (2016) 876-885.
[29] G.G. Greene, Behavior of reinforced concrete girders under cyclic torsion and torsion combined with shear: Experimental investigation and analytical models, Ph.D. Dissertation, University of Missouri, Rolla, (2006).
[30] G. Hurtado, Effect of torsion on the flexural ductility of reinforced concrete bridge columns, Ph.D. Dissertation, University of California, Berkeley, (2009).
[31] American Society of Civil Engineers, Minimum Design Loads for Buildings and Other Structures: ASCE 7-10, Reston, Virginia, (2010).
[32] OpenSees, Open system for earthquake engineering simulation, (2004).
[33] U.S. Seismic Design Maps: USGS, (2015), Available in http://earthquake.usgs.gov/designmaps/us/application.php.
[34] Federal Emergency Management Agency, Quantifcation of Building Seismic Performance Factors: FEMA-P695, Washington, USA, (2009). | ||
|
آمار تعداد مشاهده مقاله: 599 تعداد دریافت فایل اصل مقاله: 784 |
||