تثبیت خاک ماسه‌ای با ژئوپلیمر بر پایه نانو مواد و پوزولان تفتان

[1]L. Barden, G. Sides, Sample disturbance in the investigation of clay structure, Geotechnique, 21(3) (1971) 211-222.

[2]Z. Zhang, M. Tao, Durability of cement stabilized low plasticity soils, Journal of geotechnical and geoenvironmental engineering, 134(2) (2008) 203-213.

[3]O.S.B. Al-Amoudi, K. Khan, N.S. Al-Kahtani, Stabilization of a Saudi calcareous marl soil, Construction and Building Materials, 24(10) (2010) 1848-1854.

[4]D.H. Moon, D.G. Grubb, T.L. Reilly, Stabilization/solidification of selenium-impacted soils using Portland cement and cement kiln dust, Journal of hazardous materials, 168(2-3) (2009) 944-951.

[5]T. Edil, C. Benson, M. Bin-Shafique, B. Tanyu, W.-H. Kim, A. Senol, Field evaluation of construction alternatives for roadways over soft subgrade, Transportation Research Record: Journal of the Transportation Research Board, (1786) (2002) 36-48.

[6]H. Kukko, Stabilization of clay with inorganic by-products, Journal of materials in civil engineering, 12(4) (2000) 307-309.

[7]K.L. Scrivener, R.J. Kirkpatrick, Innovation in use and research on cementitious material, Cement and concrete research, 38(2) (2008) 128-136.

[8]A.M. Al Bakri, O.A. Abdulkareem, A. Rafiza, Y. Zarina, M. Norazian, H. Kamarudin, Review on Processing of low calcium fly ash geopolymer concrete, Australian Journal of Basic and Applied Sciences, 7(5) (2013) 342-349.

[9]A. Islam, U.J. Alengaram, M.Z. Jumaat, I.I. Bashar, S.A. Kabir, Engineering properties and carbon footprint of ground granulated blast-furnace slag-palm oil fuel ashbased structural geopolymer concrete, Construction and Building Materials, 101 (2015) 503-521.

[10]J. Davidovits, Geopolymers: inorganic polymeric new materials, Journal of Thermal Analysis and calorimetry, .6561-3361 (1991) (8)73

[11]J.L. Provis, J.S.J. Van Deventer, Geopolymers: structures, processing, properties and industrial applications, Elsevier, 2009.

[12]I. Maragkos, I.P. Giannopoulou, D. Panias, Synthesis of ferronickel slag-based geopolymers, Minerals Engineering, 22(2) (2009) 196-203.

[13]C. Phetchuay, S. Horpibulsuk, C. Suksiripattanapong, A. Chinkulkijniwat, A. Arulrajah, M.M. Disfani, Calcium carbide residue: Alkaline activator for clay–fly ash geopolymer, Construction and Building Materials, 69 (2014) 285-294.

[14]J. Geng, M. Zhou, T. Zhang, W. Wang, T. Wang, X. Zhou, X. Wang, H. Hou, Preparation of blended geopolymer from red mud and coal gangue with mechanical cogrinding preactivation, Materials and Structures, 50(2) (2017) 109.

[15]I. Giannopoulou, D. Dimas, I. Maragkos, D. Panias, Utilization of metallurgical solid by-products for the development of inorganic polymeric construction materials, Global NEST Journal, 11(2) (2009) 127-136.

[16]V.A. Mymrin, A.J. Vázquez-Vaamonde, Red mud of aluminium production waste as basic component of new construction materials, Waste Management & Research, 19(5) (2001) 465-469.

[17]Z. Pan, D. Li, J. Yu, N. Yang, Properties and microstructure of the hardened alkali-activated red mud–slag cementitious material, Cement and Concrete Research, 33(9) (2003) 1437-1441.

[18]S. Detphan, P. Chindaprasirt, Preparation of fly ash and rice husk ash geopolymer, International Journal of Minerals, Metallurgy and Materials, 16(6) (2009) 720-726.

[19]P. Duxson, A. Fernández-Jiménez, J.L. Provis, G.C. Lukey, A. Palomo, J.S. van Deventer, Geopolymer technology: the current state of the art, Journal of materials science, 42(9) (2007) 2917-2933.

[20]P. Sukmak, S. Horpibulsuk, S.-L. Shen, Strength development in clay–fly ash geopolymer, Construction and building Materials, 40 (2013) 566-574.

[21]Sindhunata, J. Van Deventer, G. Lukey, H. Xu, Effect of curing temperature and silicate concentration on flyash-based geopolymerization, Industrial & Engineering Chemistry Research, 45(10) (2006) 3559-3568.

[22]J. Davidovits, Geopolymer, green chemistry and sustainable development solutions: proceedings of the world congress geopolymer 2005, Geopolymer Institute, 2005.

[23]F. Pacheco-Torgal, D. Moura, Y. Ding, S. Jalali, Composition, strength and workability of alkali-activated metakaolin based mortars, Construction and Building Materials, 25(9) (2011) 3732-3745.

[24]Z. Yunsheng, S. Wei, L. Zongjin, Composition design and microstructural characterization of calcined kaolin-based geopolymer cement, Applied Clay Science, 47(3-4) (2010) 271-275.

[25]B.C. McLellan, R.P. Williams, J. Lay, A. Van Riessen, G.D. Corder, Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement, Journal of cleaner production, 19(9-10) (2011) 1080-1090.

[26]E. Diaz, E. Allouche, S. Eklund, Factors affecting the suitability of fly ash as source material for geopolymers, Fuel, 89(5) (2010) 992-996.

[27]V. Toufigh, M. Barzegari Dehaji, K. Jafari, Experimental investigation of stabilisation of soils with Taftan pozzolan, European Journal of Environmental and Civil Engineering, (2018) 1-24.

[28]M. Sabbagh Gol, V. Toufigh, Feasibility Study of Sandy Soil Stabilization with Glass Powder and Natural Pozzolan Based Geopolymer, Amirkabir Journal of Civil Engineering, 51(1) (2019) 169-182.

[29]E.N. Kani, A. Allahverdi, Effect of chemical composition on basic engineering properties of inorganic polymeric binder based on natural pozzolan, Ceramics-Silikaty, 53(3) (2009) 195-204.

[30]D. Bondar, C.J. Lynsdale, N.B. Milestone, Alkali-activated natural pozzolan concrete as new construction material, ACI Materials Journal, 110(3) (2013) 331.

[31]H.M. Khater, Effect of nano-silica on microstructure formation of low-cost geopolymer binder, Nanocomposites, 2(2) (2016) 84-97.

[32]P.S. Deb, P.K. Sarker, S. Barbhuiya, Effects of nano-silica on the strength development of geopolymer cured at room temperature, Construction and Building Materials, .386-576 (5102) 101.

[33]S. Naskar, A.K. Chakraborty, Effect of nano materials in geopolymer concrete, Perspectives in Science, 8 (2016) 273-275.

[34]D. Adak, M. Sarkar, S. Mandal, Structural performance of nano-silica modified fly-ash based geopolymer concrete, Construction and Building Materials, 135 (2017) 430-439.

[35]H. Assaedi, F. Shaikh, I.M. Low, Effect of nano-clay on mechanical and thermal properties of geopolymer, Journal of Asian Ceramic Societies, 4(1) (2016) 19-28.

[36]I. Phummiphan, S. Horpibulsuk, P. Sukmak, A. Chinkulkijniwat, A. Arulrajah, S.-L. Shen, Stabilisation of marginal lateritic soil using high calcium fly ash-based geopolymer, Road Materials and Pavement Design, 17(4) (2016) 877-891.

[37]A. Standard, D422, 2007. Standard Test Method for Particle-Size Analysis of Soils. ASTM International, West Conshohocken, PA, in.

[38]T. Phoo-ngernkham, P. Chindaprasirt, V. Sata, S. Hanjitsuwan, S. Hatanaka, The effect of adding nano-SiO2 and nano-Al2O3 on properties of high calcium fly ash geopolymer cured at ambient temperature, Materials & Design, 55 (2014) 58-65.

[39]K. Hossain, L. Mol, Structural performance of stabilized Papua New Guinea soil blocks, in:  Proc., 7th East AsiaPacific Conf. on Structural Engineering and Construction (EASEC7), Social System Institute Tokyo, 1999, pp. 14541459.

[40]M.P. Bilondi, M.M. Toufigh, V. Toufigh, Experimental investigation of using a recycled glass powder-based geopolymer to improve the mechanical behavior of clay soils, Construction and Building Materials, 170 (2018) 302-313.

[41]D. ASTM, Standard test method for unconfined compressive strength of cohesive soil, in, American Society for Testing and Materials West Conshohocken, Pa, 2006.

[42]A.C.D.-o. Soil, Rock, Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 Ft-lbf/ft3 (600 KN-m/m3)( 1, ASTM International, 2007.

[43]A. Standard, D3080-11(2011), Standard Test Method for Direct.

[44]A. Standard, C618-08a: Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete, Annual Book of ASTM Standards, (2008).

[45]A. Bagheri, T. Parhizkar, H. Madani, A. Raisghasemi, The influence of different preparation methods on the aggregation status of pyrogenic nanosilicas used in concrete, Materials and structures, 46(1-2) (2013) 135-143.

[46]S. Ahmari, K. Parameswaran, L. Zhang, Alkali activation of copper mine tailings and low-calcium flash-furnace copper smelter slag, Journal of Materials in Civil Engineering, 27(6)(2014) 04014193

[47]R. Idir, M. Cyr, A. Tagnit-Hamou, Use of fine glass as ASR inhibitor in glass aggregate mortars, Construction and Building Materials, 24(7) (2010) 1309-1312.

[48]D. Bondar, C. Lynsdale, N. Milestone, N. Hassani, A. Ramezanianpour, Effect of adding mineral additives to alkali-activated natural pozzolan paste, Construction and Building Materials, 25(6) (2011) 2906-2910.

[49]V.F. Barbosa, K.J. MacKenzie, C. Thaumaturgo, Synthesis and characterisation of materials based on inorganic polymers of alumina and silica: sodium polysialate polymers, International Journal of Inorganic Materials, 2(4) (2000) 309-317.

[50]A.S. Muntohar, A. Widianti, E. Hartono, W. Diana, Engineering properties of silty soil stabilized with lime and rice husk ash and reinforced with waste plastic fiber, Journal of Materials in Civil Engineering, 25(9) (2012) 1260-1270.

[51]A. Dexter, C.W. Watts, Tensile strength and friability, Soil and environmental analysis: Physical methods, 2 (2000) .334-504

[52]A.A. Correia, P.J.V. Oliveira, D.G. Custódio, Effect of polypropylene fibres on the compressive and tensile strength of a soft soil, artificially stabilised with binders, Geotextiles and Geomembranes, 43(2) (2015) 97-106.

[53]N. Cristelo, V.M. Cunha, A.T. Gomes, N. Araújo, T. Miranda, M. de Lurdes Lopes, Influence of fibre reinforcement on the post-cracking behaviour of a cement-stabilised sandy-clay subjected to indirect tensile stress, Construction and Building Materials, 138 (2017) 163-173.

[54]T.-T. Bui, Q.-B. Bui, A. Limam, S. Maximilien, Failure of rammed earth walls: From observations to quantifications, Construction and Building Materials, 51 (2014) 295-302.

[55]V. Toufigh, E. Kianfar, The effects of stabilizers on the thermal and the mechanical properties of rammed earth at various humidities and their environmental impacts, Construction and Building Materials, 200 (2019) 616-629.

[56]H. Danso, D.B. Martinson, M. Ali, J. Williams, Effect of fibre aspect ratio on mechanical properties of soil building blocks, Construction and Building Materials, 83 (2015) 314-319.

[57]M.J. Khattak, M. Alrashidi, Durability and mechanistic characteristics of fiber reinforced soil–cement mixtures, The International Journal of Pavement Engineering, 7(1) (2006) 53-62.

[58]A. Krishnayya, Z. Eisenstein, Brazilian tensile test for soils, Canadian Geotechnical Journal, 11(4) (1974) 632-642.

[59]A. Abrishambaf, J.A. Barros, V.M. Cunha, Tensile stress–crack width law for steel fibre reinforced self-compacting concrete obtained from indirect (splitting( tensile tests, Cement and Concrete Composites, 57 (2015) 153-165.

[60]I.B. Topcu, M. Canbaz, Properties of concrete containing waste glass, Cement and concrete research, 34(2) (2004) 267-274.

[61]A.C. Institute, Building Code Requirements for Structural Concrete (ACI 318-14): Commentary on Building Code Requirements for Structural Concrete (ACI 318R-14): an ACI Report, American Concrete Institute. ACI, 2014.

[62]R.A. Fletcher, K.J. MacKenzie, C.L. Nicholson, S. Shimada, The composition range of aluminosilicate geopolymers, Journal of the European Ceramic Society, 25(9) (2005) 1471-1477.