پیوندهای مفید
آمار
| تعداد نشریات | 9 |
| تعداد شمارهها | 452 |
| تعداد مقالات | 5,748 |
| تعداد مشاهده مقاله | 8,234,504 |
| تعداد دریافت فایل اصل مقاله | 6,752,190 |
Optimum Design of BrushLess DC Motor with Minimum Torque Pulsation using FEM & PSO | ||
| AUT Journal of Electrical Engineering | ||
| مقاله 6، دوره 44، شماره 2، دی 2012، صفحه 59-70 اصل مقاله (1.78 M) | ||
| نوع مقاله: Research Article | ||
| شناسه دیجیتال (DOI): 10.22060/eej.2012.360 | ||
| نویسندگان | ||
| Mojtaba Pourjafari1؛ Esmael Fallah Choolabi* 2؛ mehrdad jafar bolan3 | ||
| 1M.Sc. Student, Department of Engineering, University of Guilan, Rasht, Iran | ||
| 2Assistant Professor, Department of Engineering, University of Guilan, Rasht, Iran | ||
| 3Associated Professor, Department of Electrical Engineering, Malek Ashtar University of Technology, Shahin shahr, Iran | ||
| چکیده | ||
| Despite many advantages of BrushLess DC motor, torque pulsation is one of the most important disadvantages of it. At first, an optimum primary design of BLDC motor is done using PSO algorithm. Then, other parameters for reducing the torque pulsation are considered by finite element method. It is shown that fractional slot structure has many advantages than conventional one. Both cogging and ripple torque have been reduced for fractional structure. In the next steps, other important torque pulsation parameters, such as magnet embrace, offset and skew are considered. Proper embrace, skew and offset are achieved for reducing torque pulsation by nonlinear finite-element analysis. | ||
| کلیدواژهها | ||
| BrushLess DC Motor؛ Torque pulsation؛ finite element؛ PSO algorithm | ||
| عنوان مقاله [English] | ||
| Optimum Design of BrushLess DC Motor with Minimum Torque Pulsation using FEM & PSO | ||
| نویسندگان [English] | ||
| اسماعیل فلاح چولابی2؛ | ||
| 1M.Sc. Student, Department of Engineering, University of Guilan, Rasht, Iran | ||
| 2Assistant Professor, Department of Engineering, University of Guilan, Rasht, Iran | ||
| 3Associated Professor, Department of Electrical Engineering, Malek Ashtar University of Technology, Shahin shahr, Iran | ||
| چکیده [English] | ||
| Despite many advantages of BrushLess DC motor, torque pulsation is one of the most important disadvantages of it. At first, an optimum primary design of BLDC motor is done using PSO algorithm. Then, other parameters for reducing the torque pulsation are considered by finite element method. It is shown that fractional slot structure has many advantages than conventional one. Both cogging and ripple torque have been reduced for fractional structure. In the next steps, other important torque pulsation parameters, such as magnet embrace, offset and skew are considered. Proper embrace, skew and offset are achieved for reducing torque pulsation by nonlinear finite-element analysis. | ||
| مراجع | ||
|
[1] Parsa, L., Toliyat, H.A., Goodarzi, A., “Five-Phase Interior Permanent-Magnet Motors With Low Torque Pulsation”, IEEE Transactions on industry applications, vol. 43, no. 1, pp. 40- 46, Jan/Feb, 2007. [2] Hanselman, D.C., “Brushless Permanent Magnet Motor Design Hardcover”, 2nd edition, 2003. [3] Favre, E., Cardoletti, L., Jufer, M., “Permanent magnet synchronous motors: A comprehensive approach to cogging torque suppression”, IEEE Transactions on Industry Applications, vol. 29, no. 6, pp. 1141- 1149, Nov, 1993. [4] Murthy, S., Derouane, B., Liu, B., Sebastian, T., “Minimization of torque pulsations in a trapezoidal back-EMF permanent magnet brushless DC motor”, IEEE Record of Industry Applications Conference, vol. 2, pp. 1237- 1242, 1999. [5] Lee, G.H., Kim, S.I., Hong, J.P., Bahn, J.H., “Torque Ripple Reduction of Interior Permanent Magnet Synchronous Motor Using Harmonic Injected Current”, IEEE Transactions on Magnetics, vol. 44, no. 6, pp. 1582- 1585, June, 2008. [6] Feipeng, Xu., Tiecai, L., Pinghua, T., “A low cost drive strategy for BLDC motor with low torque ripples”, 3rd IEEE Conference on Industrial Electronics and Applications, pp. 2499- 2502, June, 2008. [7] Ozturk, S. B., Toliyat, H.A., “Direct Torque and Indirect Flux Control of Brushless DC Motor”, IEEE/ASME Transactions on Mechatronics, vol. 16, no. 2, pp. 351- 360, April, 2011. [8] Gulez, K., Adam, A.A., Pastaci, H., “A Novel Direct Torque Control Algorithm for IPMSM With Minimum Harmonics and Torque Ripples”, IEEE/ASME Transactions on Mechatronics, vol. 12, no. 2, pp. 223- 227, April, 2007. [9] Kashani, E.B., Niasar, A.H., “Implementation of a novel brushless DC motor drive based on one-cycle control strategy”, 5th Power Electronics Drive Systems and Technologies Conference, pp. 55- 60, Feb, 2014. [10] Brage Filho, E.R., Lima, A.M.N., “Reducing cogging torque in Interior permanent magnet machines without skewing”, IEEE Transaction on Magnetics, vol. 34, no. 5, pp. 3652- 3655, Sept, 1998. [11] Zhu, Z.Q., Howe, D., “Influence of design parameters on cogging torque in permanent magnet machines”, IEEE Transaction on Energy Conversion, vol. 15, no. 4, pp. 407- 412, Dec, 2000. [12] Bianchi, N., Bolognani, S., “Design techniques for reducing the cogging torque in surface-mounted PM motors”, IEEE Record of Industry Applications Conference, vol. 1, pp. 179- 185, 2000. [13] Hendershot, J.R., Miller, T.J.E., “Design of Brushless Permanent Magnet Motors (Monographs in Electrical and Electronic Engineering)”, Publisher: Oxford University Press, 1995. [14] Parsa, L. Hao, L., “Interior Permanent Magnet Motors With Reduced Torque Pulsation”, IEEE Transactions on Industrial Electronics, vol. 55, no. 2, pp. 602 - 609, Feb, 2008. [15] Chung, T. K., Kim, S. K., Hahn, S. Y., “Optimal Pole Shape Design for the Reduction of Cogging Torque of Brushless DC motor Using Evolution Strategy”, IEEE Transactions on Magnetics, vol. 33, no.2, pp. 1908- 1911, March, 1997. [16] Han, K. J., Cho, H. S., Cho, D. H., Cho, H. R., Lee, H. S., Jung, H. K., “Core Shape Optimization for Cogging Torque Reduction of BLDC Motor”, International Electric Machines and Drives Conference, pp. 416- 418, May, 1999. [17] Kim, H. S., You, Y. M., Kwon, B. I., “Rotor Shape Optimization of Interior Permanent Magnet BLDC Motor According to Magnetization Direction”, IEEE Transactions on Magnetics, vol. 49, no. 5, pp. 2193- 2196, May, 2013. [18] Kolahdooz, A., Shakeri, M., Jabbari, A., Gol, sh., “Design, Simulation and Fabrication of a BLDC Motor Speed Control”, Majlesi J. of Electrical Eng., vol. 2, no. 2, pp. 39- 48, 2008. [19] Kennedy, J., Eberhart, R. C., “Particle Swarm Optimization”, IEEE Conference on Neural Networks, vol. 4, 1995. [20] Clerc., M., Kennedy, J., “The particle swarm Explosion, stability and convergence in a multi- dimensional complex space”, IEEE Tran .on Evolutionary Computation, vol. 6, no. 1, pp. 58- 73, 2002. | ||
|
آمار تعداد مشاهده مقاله: 2,661 تعداد دریافت فایل اصل مقاله: 4,306 |
||