بررسی مشخصات مکانیکی بتن‌های سازگار با محیط زیست و مسلح شده با الیاف فولادی با تأکید بر انتخاب طرح اختلاط‌های بهینه اقتصادی و مقاومتی

[1] C. Meyer, The greening of the concrete industry, Cement Concr. Compos, 31(8) (2009) 601–605.

[2] J. Xiao, H. Xie, C. Zhang, Investigation on building waste and reclaim in Wenchuan earthquake disaster area, Resour Conserv Recycl, 61 (2012) 109–17.

[3] E. Vazqnez, M. Bara, the influence of retained moisture in aggregates from recycling on the properties of new hardened concrete, Waste management, 16 (3) (1996) 113- 117.

[4] N.D. Oikonomou, Recycled concrete aggregates, Cem. Concr. Compos, 27(2) (2005) 315–318.

[5] H. Qasrawi, F. Shalabi, I. Asi, Use of low cao unprocessed steel slag in concrete as fine aggregate, Construction and Building Material, 23 (2009) 1118‐1125.

[6] A. Bouikni, R.N. Swamy, A. Bali, Durability properties of concrete containing 50% and 65% slag, Construction and Building Material, 23 (2009) 2836‐2845.

[7] N. Banthia, M. Sappakittipakom, Toughness enhancement in steel fiber reinforced concrete through fiber hybridization, Cement and Concrete Research, 39 (2007) 1366-1372.

[8] Z. Deng, J. Li, Tension and impact behaviors of new type fiber reinforced concrete, Cement Concrete Res, 25(15) (2005) 189–204.

[9] K. Aghaee, M.A. Yazdi, D. Tsavdaridis, Investigation into the mechanical properties of structural lightweight concrete reinforced with waste steel wires, Mag. Concr. Res, 67 (2014) 197–205.

[10] A. Ajdukiewicz, A. Kliszczewicz, Influence of recycled aggregates on mechanical. Properties of HS/HPC, Cement and Concrete Comp, 24 (2002) 79–269.

[11] V. Afroughsabet, L. Biolzi, T. Ozbakkaloglu, Influence of double hooked-end steel fibers and slag on mechanical and durability properties of high performance recycled aggregate concrete, Composite Structures, 181 (2017) 273-284.

[12] V. Bindiganavile, N. Banthia, Polymer and steel fiber-reinforced cementitious composites under impact loading_Part 2: Flexural toughness, ACI Materials Journal, 98(1) (2001) 17-24.

[13] S. Parviz, K. Ataullah, J.W. Hsu, Mechanical properties of concrete materials reinforced with polypropylene or polyethylene fibers, ACI Materials Journal, 89(6) (1992) 535-540.

[14] M. Batayneh, I. Marie, I. Asi, Use of selected waste material in concrete mixes, Waste Management, 27(12) (2007) 1870-1876.

[15] K. Celik, M.D. Jackson, M. Mancio, C. Meral, A.H. Emwas, P.K.Mehta, P.J.M. Monteiro, High-volume natural volcanic pozzolan and limestone powder as partial replacements for Portland cement in self-compacting and sustainable concrete, Cement and concrete composites, 45 (2014) 136-147.

[16] R. Yu, P. Spiesz, H.J.H. Brouwers, Development of an eco-friendly Ultra- High Performance Concrete (UHPC) with efficient cement and mineral admixtures uses, Cement and Concrete Composites, 55 (2015) 383-394.

[17] H.T. Le, H.M. Ludwig, Effect of rice husk ash and other mineral admixtures on properties of self-compacting high performance concrete, Materials & Design, 89 (2016) 156 - 166.

[18] M. Nehdi, J.D. Ladanchuk, Fiber synergy in fiber-reinforced self-consolidating concrete, ACI Materials Journal, 101(6) (2004) 508-517.

[19] M. Mastali, A. Dalvand, A. Sattarifard, The impact resistance and mechanical properties of the reinforced self-compacting concrete incorporating recycle CFRP fiber with different and dosages, Composite part B, 112 (2017) 74-92.

[20] ASTM C150 (2012). “Standard Specification for Portland Cement.”

[21] W.L. David, A.A. Andi, Durability assessment of alkali activated slag (AAS) concrete, Mater. Struct., 45 (2012) 1425–1437.

[22] M.D.J. Sanchez, P.A. Gutierrez, Study on the influence of attached mortar content on the properties of recycled concrete aggregate, Construction and building materials, 23 (2009) 872-877.

[23] M. Pepe, R.D. Toledo Filho, E.A. Koenders, E. Martinelli, Alternative processing procedures for recycled aggregates in structural concrete, Construction and Building Materials, 69 (2014) 124-132.

[24] ASTM C125-19, Standard Terminology Relating to Concrete and Concrete Aggregates, ASTM International, West Conshohocken, PA, 2019.

[25] ASTM C131 / C131M-14 (2006). “Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine.”

[26] ASTM C 143/C 143M-15a (2015). “Standard Test Method for Slump of Hydraulic-Cement Concrete.”

[27] ASTM C 642-13 (2013). “Standard Test Method for Density, Absorption, and Voids in Hardened Concrete.”

[28] ASTM C 39/C 39M-03 (2003). “Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens.”

[29] ASTM C 496/C 496M-11 (2011). “Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens.”

[30] ASTM C1609 / C1609M-19 (2019). “Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam with Third-Point Loading).”

[31] K. Akhavan Kazemi, O. Eren, A.R. Rezaei, Some mechanical properties of normal and recycled aggregate concretes, Scientia Iranica A, 22(6) (2015) 1972-1980.

[32] H. Sasanipour, F. Aslani, J. Taherinezhad, Effect of silica fume on durability of self-compacting concrete made with waste recycled concrete aggregates, Construction and Building Materials, 227 (2019) 116598.

[33] Y. Hu, Z. Tang, W. Li, Y. Li, W.Y. Tam, Physical-mechanical properties of fly ash/GGBFS geopolymer composites with recycled aggregates, Construction and Building Materials, 226 (2019) 139-151.

[34] H. Chao-Lung, B.L. Anh-Tuan, C. Chun-Tsun, Effect of rice husk ash on the strength and durability characteristics of concrete, J. Constr. Build. Mater, 25 (2011) 3768–3772.

[35] R. Demirboga, I. Turkmen, M.B. Karako, Relationship between ultrasonic velocity and compressive strength for high-volume mineral-admixtured concrete, J. Cem. Concr. Res, 34 (2004) 2329–2336.

[36] M. Behera, S.K. Bhattacharyya, A.K. Minocha, R. Deoliya, S. Maiti, Recycled aggregate from C&D waste & its use in concrete—A breakthrough towards sustainability in construction sector: A review, Constr. Build. Mater, 68 (2014) 501–516.

[37] M. Mansur, Ö. Çakır, An Investigation on Mechanical and Physical Properties of Recycled Coarse Aggregate (RCA) Concrete with GGBFS, Int J Civ Eng, 15(4) (2017) 549–563.

[38] E.A. Whitehurst, Soniscope tests concrete structures, Journal of the American Concrete Institute, 47 (1951) 443-444.

[39] M.E. Oliveira, C.S. Assis, A.W. Terni, Study on compressed stress, water absorption and modulus of elasticity of produced concrete made by recycled aggregate, In: International RILEM Conference on the Use of recycled Materials and Structures, (2008) 636- 642.

[40] D. Matias, J.D. Brito, A. Rosa, D. Pedro, Durability of concrete with recycled coarse aggregates: influence of superplasticizers, Journal of materials in civil engineering, 26(7) (2014) 06014011.

[41] J.R. Correia, J. De Brito, A.S. Pereira, Effects on concrete durability of using recycled ceramic aggregates, Materials and Structures, 39(2) (2006) 169-177.

[42] M. Bravo, J. De Brito, J. Pontes, L. Evangelista, Durability performance of concrete with recycled aggregates from construction and demolition waste plants, Construction and Building Materials, 77 (2015) 357-369.

[43] C. Frazão, A. Camões, J. Barros, D. Gonçalves, Durability of steel fiber reinforced self-compacting concrete, Construction and Building Materials, 80 (2015) 155–166.

[44] A. Dalvand, F. Omidinasab, A. Sahraei Moghadam, Experimental investigation of fiber self-compacting cementitious composite with hybrid fibers in improving the behavior of concrete pavements, Journal of Transportation Infrastructure Engineering, 5(3) (2019) 89-100 (in Persian).

[45] S.W. Tabsh, A.S. Abdelfatah, Influence of recycled concrete aggregates on strength properties of concrete, Constr Build Mater, 23 (2009) 1163–1167.

[46] F.T. Olorunsogo, N. Padayachee, Performance of recycled aggregate concrete monitored by durability indexes, Cem Concr Res, 32 (2002) 179–185.

[47] A. Ajdukiewicz, A. Kliszczewicz, Influence of recycled aggregates on mechanical properties of HS/HPC, Cement Concrete Compos, 24 (2002) 269–79.

[48] Khaloo, E. Molaei Raisi, P. Hosseini, H. Tahsiri, Mechanical performance of self-compacting concrete reinforced with steel fibers, J. Constr. Build. Mater, 51 (2014) 179–186.

[49] El-Dieb, Mechanical, durability and microstructural characteristics of ultrahigh- strength self-compacting concrete incorporating steel fibers, J. Mater. Des, 30 (2009) 4286–4292.

[50] F. Aslani, S. Nejadi, Self-compacting concrete incorporating steel and polypropylene fibers: compressive and tensile strengths, moduli of elasticity and rupture, compressive stress–strain curve, and energy dissipated under compression, J. Compos. B: Eng, 53 (2013) 121–133.

[51] Z.H. Duan, C.S. Poon, Properties of recycled aggregate concrete made with recycled aggregates with different amounts of old adhered mortars, Materials & Design, 58 (2014) 19-29.

[52] S. Iqbal, A. Ali., K. Holschemacher, T.A. Bier, Mechanical properties of steel fiber reinforced high strength lightweight self-compacting concrete (SHLSCC), J. Constr. Build. Mater, 98 (2015) 325–333.

[53] A. Sahraei Moghadam, F. Omidinasab, A. Dalvand, Experimental investigation of (FRSC) cementitious composite functionally graded slabs under projectile and drop weight impacts, Construction and Building Materials, 237 (2020) 117522.

[54] N. Banthia, J. Trottier, Concrete reinforced with deformed steel fibers, Part I: bond-slip mechanisms, ACI Mater. J, 91 (1994) 435–446.

[55] J.A. Carneiro, P.R.L. Lima, M.B. Leite, R.D.T Filho, Compressive stress–strain behavior of steel fiber reinforced-recycled aggregate concrete, Cement and Concrete Composites, 46 (2014) 65-72.

[56] M. Mastali, A. Dalvand, Use of silica fume and recycled steel fibers in self-compacting concrete, construction and building materials, 125 (2016) 196-209.

[57] T. Ponikiewski, J. Gołaszewski, Properties of steel fibre reinforced self-compacting concrete for optimal rheological and mechanical properties in precast beams, J. Procedia Eng, 65 (2013) 290–295.

[58] M. Mastali, M. Ghasemi Naghibdehi, M. Naghipour, S.M. Rabiee, Experimental assessment of functionally graded reinforced concrete (FGRC) slabs under drop weight and projectile impacts, Construction and Building Materials, 95 (2015) 296–311.

[59] F. Bayramov, C. Tasdemir, M.A. Tasdemir, Optimization of fibre reinforced concretes by means of statistical response surface method, Cement Concr Compos, 26 (2004) 665–675.

[60] W.F. Smith, Experimental design for formulation, American Statistical Association. (2005).

[61] O. Sengul, M.A. Tasdemir, Compressive strength and rapid chloride permeability of concretes with ground fly ash and slag, Mater Civ Eng, 21 (2009) 494–501.

[62] O. Sengul, Mechanical behavior of concretes containing waste steel fibers recovered from scrap tires, Construct Build Mater, 122 (2016) 649–58.

[63] Z. Abdollahnejad, S. Mirlando, F. Pacheco-Torgal, J. Agiuar Barroso, Cost-efficient one-part alkali-activated mortars with low global warming potential for floor heating systems applications, Eur J Environ Civ. Eng., 21 (2017) 412–429.

[64] M. Mastali, Z. Abdollahnejad, F. Pacheco-Torgal, Carbon dioxide sequestration on fly ash/waste glass alkali-based mortars with recycled aggregates: compressive strength, hydration products, carbon footprint, and cost analysis, Woodhead Publishing Series in Civil and Structural Engineering, (2018) 299-348.