بررسی رفتار نفوذ در اهداف تک و چندلایه فلزی تحت ضربه پرتابه

[1] H. Babaei, T.M. Mostofi, M. Alitavoli, Experimental and analytical investigation into large ductile transverse deformation of monolithic and multi-layered metallic square targets struck normally by rigid spherical projectile, Thin-Walled Structures, 107 (2016) 257-265.

[2] T.M. Mostofi, H. Babaei, M. Alitavoli, S. Hosseinzadeh, On dimensionless numbers for predicting large ductile transverse deformation of monolithic and multi-layered metallic square targets struck normally by rigid spherical projectile, Thin-Walled Structures, 112 (2017) 118-124.

[3] T. Børvik, M. Langseth, O. Hopperstad, K. Malo, Ballistic penetration of steel plates, International journal of impact engineering, 22(9-10) (1999) 855-886.

[4] J. Jovicic, A. Zavaliangos, F. Ko, Modeling of the ballistic behavior of gradient design composite armors, Composites Part A: applied science and manufacturing, 31(8) (2000) 773-784.

[5] Y.H. Yoo, H. Shin, Protection capability of dual flying plates against obliquely impacting long-rod penetrators, International journal of impact engineering, 30(1) (2004) 55-68.

[6] G. Liaghat, A. Malekzadeh, A modification to the mathematical model of perforation by Dikshit and Sundararajan, International journal of impact engineering, 22(5) (1999) 543-550.

[7] C.-C. Liang, M.-F. Yang, P.-W. Wu, T.-L. Teng, Resistant performance of perforation of multi-layered targets using an estimation procedure with marine application, Ocean engineering, 32(3-4) (2005) 441-468.

[8] N. Gupta, M. Iqbal, G. Sekhon, Effect of projectile nose shape, impact velocity and target thickness on deformation behavior of aluminum plates, International Journal of Solids and Structures, 44(10) (2007) 3411-3439.

[9] E. Flores-Johnson, M. Saleh, L. Edwards, Ballistic performance of multi-layered metallic plates impacted by a 7.62-mm APM2 projectile, International Journal of Impact Engineering, 38(12) (2011) 1022-1032.

[10] Y. Deng, W. Zhang, Z. Cao, Experimental investigation on the ballistic resistance of monolithic and multi-layered plates against hemispherical-nosed projectiles impact, Materials & Design, 41 (2012) 266-281.

[11] Y. Deng, W. Zhang, Z. Cao, Experimental investigation on the ballistic resistance of monolithic and multi-layered plates against ogival-nosed rigid projectiles impact, Materials & Design, 44 (2013) 228-239.

[12] G. Tiwari, M. Iqbal, P. Gupta, N. Gupta, The ballistic resistance of thin aluminium plates with varying degrees of fixity along the circumference, International Journal of Impact Engineering, 74 (2014) 46-56.

[13] M. Iqbal, G. Tiwari, P. Gupta, P. Bhargava, Ballistic performance and energy absorption characteristics of thin aluminium plates, International Journal of Impact Engineering, 77 (2015) 1-15.

[14] P.M. Elek, S.S. Jaramaz, D.M. Micković, N.M. Miloradović, Experimental and numerical investigation of perforation of thin steel plates by deformable steel penetrators, Thin-Walled Structures, 102 (2016) 58-67.

[15] P. Sharma, P. Chandel, V. Bhardwaj, M. Singh, P. Mahajan, Ballistic impact response of high strength aluminium alloy 2014-T652 subjected to rigid and deformable projectiles, Thin-Walled Structures, 126 (2018) 205-219.

[16] M. Sayahbadkhor, K. Vahedi, A.R. Naddaf Oskouei, Presenting a modified theory and analytical investigation of projectile penetration into ceramic - metal semi-infinite targets, Journal of Solid and Fluid Mechanics, 9(2) (2019) 31-45. (In Persian)

[17] M. Sayahbadkhor, A.R. Naddaf Oskouei, K. Vahedi, Evaluation of the projectile penetration models in the metal and ceramic targets, Journal of Solid and Fluid Mechanics, 9(4) (2019) 77-92. (In Persian)

[18] A. Jamali, H. Babaei, N. Nariman-Zadeh, S. Ashraf Talesh, T. Mirzababaie Mostofi, Multi-objective optimum design of ANFIS for modelling and prediction of deformation of thin plates subjected to hydrodynamic impact loading, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications,  234(3) (2020) 368-378.

[19] M. Rezasefat, T. Mirzababaie Mostofi, H. Babaei, M. Ziya-Shamami, M. Alitavoli, Dynamic plastic response of double-layered circular metallic plates due to localized impulsive loading, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 233(7) (2019) 1449-1471.

[20] M. Rezasefat, T.M. Mostofi, T. Ozbakkaloglu, Repeated localized impulsive loading on monolithic and multi-layered metallic plates, Thin-Walled Structures, 144 (2019) 106332.

[21] H. Babaei, T.M. Mostofi, M. Alitavoli, N. Namazi, A. Rahmanpoor, Dynamic compaction of cold die Aluminum powders, Geomech Eng, 10 (2016) 109-124.

[22] H. Babaei, T. Mirzababaie Mostofi, Modeling and prediction of fatigue life in composite materials by using singular value decomposition method, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 234(2) (2020) 246-254.

[23] H. Babaei, T.M. Mostofi, M. Alitavoli, M. Namdari, Experimental investigation and a model presentation for predicting the behavior of metal and alumina powder compaction under impact loading, Journal of Modares Mechanical Engineering, 15(5) (2015) 357-366.

[24] R.A. Aliev, B. Guirimov, B. Fazlollahi, R.R. Aliev, Evolutionary algorithm-based learning of fuzzy neural networks. Part 2: Recurrent fuzzy neural networks, Fuzzy sets and systems, 160(17) (2009) 2553-2566.

[25] I.P. Panapakidis, A.S. Dagoumas, Day-ahead natural gas demand forecasting based on the combination of wavelet transform and ANFIS/genetic algorithm/neural network model, Energy, 118 (2017) 231-245.

[26] H. Babaei, T.M. Mostofi, M. Alitavoli, A. Saeidinejad, Experimental investigation and dimensionless analysis of forming of rectangular plates subjected to hydrodynamic loading, Journal of Applied Mechanics and Technical Physics, 58(1) (2017) 139-147.

[27] N. Nariman-Zadeh, A. Darvizeh, M. Felezi, H. Gharababaei, Polynomial modelling of explosive compaction process of metallic powders using GMDH-type neural networks and singular value decomposition, Modelling and Simulation in Materials Science and Engineering, 10(6) (2002) 727.

[28] H. Gharababaei, N. Nariman-Zadeh, A. Darvizeh, A simple modelling method for deflection of circular plates under impulsive loading using dimensionless analysis and singular value decomposition, Journal of Mechanics, 26(3) (2010) 355-361.

[29] F. Farrokhi, A. Firoozfar, M.S. Maghsoudi, Evaluation of liquefaction-induced lateral displacement using a GMDH-type neural network optimized by genetic algorithm. Arabian Journal of Geosciences, 13(1) (2020) 4.

[30] T.M. Mostofi, H. Babaei, M. Alitavoli, Theoretical analysis on the effect of uniform and localized impulsive loading on the dynamic plastic behaviour of fully clamped thin quadrangular plates, Thin-Walled Structures, 109 (2016) 367-376.

[31] T.M. Mostofi, A. Golbaf, A. Mahmoudi, M. Alitavoli, H. Babaei, Closed-form analytical analysis on the effect of coupled membrane and bending strains on the dynamic plastic behaviour of fully clamped thin quadrangular plates due to uniform and localized impulsive loading, Thin-Walled Structures, 123 (2018) 48-56.

[32] T.M. Mostofi, H. Babaei, M. Alitavoli, The influence of gas mixture detonation loads on large plastic deformation of thin quadrangular plates: Experimental investigation and empirical modelling, Thin-Walled Structures, 118 (2017) 1-11.

[33] T. Mirzababaie Mostofi, H. Babaei, M. Alitavoli, Experimental and theoretical study on large ductile transverse deformations of rectangular plates subjected to shock load due to gas mixture detonation, Strain, 53(4) (2017) e12235.

[34] H. Babaei, T. Mirzababaie Mostofi, New dimensionless numbers for deformation of circular mild steel plates with large strains as a result of localized and uniform impulsive loading, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 234(2) (2020) 231-245.

[35] H. Babaei, T. Mirzababaie Mostofi, E. Armoudli, On dimensionless numbers for the dynamic plastic response of quadrangular mild steel plates subjected to localized and uniform impulsive loading, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 231(5) (2017) 939-950.

[36] H. Babaei, T.M. Mostofi, M. Alitavoli, A. Darvizeh, Empirical modelling for prediction of large deformation of clamped circular plates in gas detonation forming process, Experimental Techniques, 40(6) (2016) 1485-1494.

[37] H. Babaei, T.M. Mostofi, M. Alitavoli, Study on the response of circular thin plate under low velocity impact, Geomechanics and Engineering, 9(2) (2015) 207-218.

[38] H. Babaei, T.M. Mostofi, M. Namdari-Khalilabad, M. Alitavoli, K. Mohammadi, Gas mixture detonation method, a novel processing technique for metal powder compaction: Experimental investigation and empirical modeling, Powder Technology, 315 (2017) 171-181.

[39] H. Babaei, T.M. Mostofi, S.H. Sadraei, Effect of gas detonation on response of circular plate-experimental and theoretical, Struct Eng Mech, 56(4) (2015) 535-548.

 [40] T.M. Mostofi, H. Babaei, M. Alitavoli, G. Lu, D. Ruan, Large transverse deformation of double-layered rectangular plates subjected to gas mixture detonation load, International Journal of Impact Engineering, 125 (2019) 93-106.

[41] N. Jones, Structural impact, Cambridge university press, 2011.

[42] H. Babaei, T. Mirzababaie Mostofi, M. Alitavoli, Experimental and theoretical study of large deformation of rectangular plates subjected to water hammer shock loading, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 231(3) (2017) 490-496.

[43] M. Ziya-Shamami, H. Babaei H, T.M. Mostofi, H. Khodarahmi. Structural response of monolithic and multi-layered circular metallic plates under repeated uniformly distributed impulsive loading: An experimental study, Thin-Walled Structures, 157 (2020) 107024.

[44] T.M. Mostofi, M. Sayah-Badkhor, M. Rezasefat, T. Ozbakkaloglu, H. Babaei. Gas mixture detonation load on polyurea-coated aluminum plates, Thin-Walled Structures, 155 (2020) 106851.