پیوندهای مفید
آمار
| تعداد نشریات | 9 |
| تعداد شمارهها | 446 |
| تعداد مقالات | 5,719 |
| تعداد مشاهده مقاله | 8,018,458 |
| تعداد دریافت فایل اصل مقاله | 6,527,286 |
Analytical Modeling of the Stretching in the Bimetallic Materials Produced by Equal Channel Angular Pressing | ||
| AUT Journal of Mechanical Engineering | ||
| مقاله 1، دوره 6، شماره 1، خرداد 2022، صفحه 3-14 اصل مقاله (1.31 M) | ||
| نوع مقاله: Research Article | ||
| شناسه دیجیتال (DOI): 10.22060/ajme.2021.19625.5957 | ||
| نویسندگان | ||
| Ali Mohammad Rashidi* 1؛ M. Etemadi2 | ||
| 1Department of Materials Science and Textile Engineering, Razi University, Kermanshah, Iran | ||
| 2Department of Mechanical Engineering, Langarud Branch, Islamic Azad University, Langarud, Iran | ||
| چکیده | ||
| The main idea of the present work is to provide an analytical approach for the analysis of mating surface stretch during successive equal channel angular pressing of core/shell bimetallic materials. Furthermore, the novel relationships between maximum stretches induced in each equal channel angular pressing pass with the numbers of passes and the yield strength of equal channel angular pressed steel/copper bimetallic are presented. To evaluate established relations, the tensile test is performed on steel cores of the copper/steel bimetallic samples subjected to consecutive equal channel angular pressing process up to three passes with route BC, which rotates the samples by around the longitudinal axis between each equal channel angular pressing pass. The results indicated that, for a given equal channel angular pressing die, the maximum stretch is a linear function of pass number of deformation with equal channel angular pressing process. The values of the angular position corresponding to extreme values of stretch increased as the number of pass deformations with route BC increased. Also, the value of the minimum stretch could be increased beyond a threshold value in an equal channel angular pressing process with route B by increasing the number of pass deformation. After N passes deformation by the equal channel angular pressing process, the yield strength of bimetallic samples can also be determined by estimating the maximum stretch using an established predictive model. | ||
| کلیدواژهها | ||
| Stretch؛ Equal channel angular pressing؛ Deformation route؛ Bimetallic materials؛ Yield strength | ||
| مراجع | ||
|
[1] A. Eivani, A.K. Taheri, A new method for producing bimetallic rods, Materials Letters, 61 (2007) 4110-4113.
[2] S. Ghadimi, M. Sedighi, F. Djavanroodi, A. Asgari, Experimental and numerical investigation of a Cu–Al bimetallic tube produced by ECAP, Materials and Manufacturing Processes, 30 (2015) 1256-1261.
[3] A.E. Medvedev, R. Lapovok, E. Koch, H.W. Höppel, M. Göken, Optimisation of interface formation by shear inclination: Example of aluminium-copper hybrid produced by ECAP with back-pressure, Materials & Design, 146 (2018) 142-151.
[4] M. Zebardast, A.K. Taheri, The cold welding of copper to aluminum using equal channel angular extrusion (ECAE) process, Journal of Materials Processing Technology, 211 (2011) 1034-1043.
[5] H. Mirzakouchakshirazi, A. Eivani, S. Kheirandish, Effect of post-deformation annealing treatment on interface properties and shear bond strength of Al-Cu bimetallic rods produced by equal channel angular pressing, Iranian Journal of Materials Science and Engineering, 14 (2017) 25-34.
[6] W. Hongyu, S. Jie, W. Zhenting, W. Qinglong, Z. Dewen, Z. Dianhua, Analysis of eccentric unbonded bimetal rod in ECAP based on different arrangements of soft and hard metals, Applied Mathematical Modelling, 47 (2017) 501-527.
[7] A.P. Zhilyaev, T. Werner, J.M. Cabrera, Characterization of Bimetallic Interface in Cu–Al and Ni–Cu Rods Cold Welded by Equal Channel Angular Pressing, Advanced Engineering Materials, 22 (2020) 1900653.
[8] N. Llorca-Isern, A.M. Escobar Romero, A. Roca, J.M. Cabrera, Equal channel angular pressing of Cu-Al bimetallic rod, in: Materials Science Forum, Trans Tech Publ, 2012, pp. 1811-1816.
[9] K. Narooei, A.K. Taheri, Strain field and extrusion load in ECAE process of bi-metal circular cross section, Applied Mathematical Modelling, 36 (2012) 2128-2141.
[10] Y. Qi, R. Lapovok, Y. Estrin, Microstructure and electrical conductivity of aluminium/steel bimetallic rods processed by severe plastic deformation, Journal of materials science, 51 (2016) 6860-6875.
[11] A. Eivani, S. Mirghasemi, S. Seyedein, J. Zhou, H. Jafarian, Simulation of deformation and fracture initiation during equal channel angular pressing of AZ31 magnesium alloy with covered tube casing, Journal of Materials Research and Technology, 12 (2021) 1913-1923.
[12] R. Jahadi, M. Sedighi, H. Jahed, Effects of aluminum and copper cover tube casing on the ECAP process of AM30 magnesium alloy, Materials and Manufacturing Processes, 32 (2017) 1375-1383.
[13] F. Djavanroodi, M. Daneshtalab, M. Ebrahimi, A novel technique to increase strain distribution homogeneity for ECAPed materials, Materials Science and Engineering: A, 535 (2012) 115-121.
[14] N. Bay, Mechanisms producing metallic bonds in cold welding, WELDING J., 62 (1983) 137.
[15] P. Wright, D. Snow, C. Tay, Interfacial conditions and bond strength in cold pressure welding by rolling, Metals Technology, 5 (1978) 24-31.
[16] J.W. Cave, J.D, The mechanism of cold pressure welding by rolling, J. Inst. Met., 101 (1973) 203-207.
[17] L. Vaidyanath, M. Nicholas, D. Milner, Pressure welding by rolling, British Welding Jour, 6 (1959) 13-28.
[18] W. Chen, W. He, Z. Chen, Z. Zhou, Q. Liu, Effect of wavy profile on the fabrication and mechanical properties of Al/Ti/Al composites prepared by rolling bonding: Experiments and finite element simulations, Advanced Engineering Materials, 21 (2019) 1900637.
[19] B.-W. Li, H.-P. Zhao, Q.-H. Qin, X.-Q. Feng, S.-W. Yu, Numerical study on the effects of hierarchical wavy interface morphology on fracture toughness, Computational Materials Science, 57 (2012) 14-22.
[20] J. Cui, G. Sun, G. Li, Z. Xu, P.K. Chu, Specific wave interface and its formation during magnetic pulse welding, Applied Physics Letters, 105 (2014) 221901.
[21] A. Rashidi, M. Etemadi, Investigation wavy interface forming and stretching in severe plastic deformed copper/steel bimetallic rod, Mechanics of Advanced Materials and Structures, (2020) 1-10.
[22] M. Howeyze, A. Eivani, H. Arabi, H. Jafarian, Effects of deformation routes on the evolution of microstructure, texture and tensile properties of AA5052 aluminum alloy, Materials Science and Engineering: A, 732 (2018) 120-128.
[23] Q. Li, X. Jiao, Exploration of equal channel angular pressing routes for efficiently achieving ultrafine microstructure in magnesium, Materials Science and Engineering: A, 733 (2018) 179-189.
[24] A. Eivani, H. Mirzakoochakshirazi, H. Jafarian, Investigation of joint interface and cracking mechanism of thick cladding of copper on aluminum by equal channel angular pressing (ECAP), Journal of Materials Research and Technology, 9 (2020) 3394-3405.
[25] Y. Iwahashi, Z. Horita, M. Nemoto, J. Wang, T.G. Langdon, Principle of equal-channel angular pressing for the processing of ultra-fine grained materials, Scripta materialia, 35 (1996) 143-146.
[26] A. Gupta, B. Chandrasekhar, K.K. Saxena, Effect of Equal-channel angular pressing on mechanical Properties: An overview, Materials Today: Proceedings, (2021).
[27] M. Etemadi, A.M. Rashidi, Investigation of equal-channel angular pressing of steel/copper bimetallic rods and effect of Cu-shell thickness on imposed surface stretch, Modares Mechanical Engineering, 21 (2021) 79-89.
[28] A. Afsari, M. Ranaei, Equal channel angular pressing to produce ultrafine pure copper with excellent electrical and mechanical properties, International Journal of Nanoscience and Nanotechnology (IJNN), 10 (2014) 215-222. | ||
|
آمار تعداد مشاهده مقاله: 464 تعداد دریافت فایل اصل مقاله: 451 |
||