بررسی چقرمگی شکست مود یک بین لایه‌ای در ورق‌های کامپوزیتی موج‌دار

[1] M. Azimi, G. Sharifi, A hybrid control scheme for attitude and vibration suppression of a flexible spacecraft using energy-based actuators switching mechanism, Aerospace Science and Technology, 82-83 (2018) 8.

[2] Z. Ding, C. Yuan, X. Peng, T. Wang, H. J. Qi, M. L. Dunn, Direct 4D printing via active composite materials, Science Advances, 3(4) (2017).

[3] P. Ghabezi, M. Golzar, Investigation of Mechanical Behavior of Quasi-sinusoidal Corrugated Composite Skins, Iranian Journal of Polymer Science and Technology, 24 (2011) 10.

[4] L.G. Gong, Q. Wang, C.H. Hu, C. Liu, Switching control of morphing aircraft based on q-learning, Chinese Journal of Aeronautics, 32(2) (2020) 15.

[5] T. He, G.G. Zhu, S.S.M. Swei, W. Su, Smooth-switching LPV control for vibration suppression of a flexible airplane wing, Aerospace Science and Technology, 84 (2019) 8.

[6] Y. Liu, F. Zhang, J. Leng, T.W. Chou, Microstructural design of 4D printed angle-ply laminated strips with tunable shape memory properties, Materials Letters 285 (2021).

[7] T.G. Thuruthel, E. Falotico, F. Renda, C. Laschi, Model-based reinforcement learning for closed-loop dynamic control of soft robotic manipulators, IEEE Transactions on Robotics, 35(1) (2018) 10.

[8] F. Wang, C. Yuan, D. Wang, D.W. Rosen, Q. Ge, A phase evolution based constitutive model for shape memory polymer and its application in 4D printing, Smart Materials and Structures, 29(5) (2020).

[9] Q. Wang, L.G. Gong, C.Y. Dong, K.W. Zhong, Morphing aircraft control based on switched nonlinear systems and adaptive dynamic programming, Aerospace Science and Technology, 93 (2019).

[10] L. Zhang, L. Nie, B. Cai, S. Yuan, D. Wang, Switched linear parameter-varying modeling and tracking control for flexible hypersonic vehicle, Aerospace Science and Technology, 95 (2019).

[11] T. Yokozeki, S. Takeda, T. Ogasawara, T. Ishikawa, Mechanical Properties of Corrugated Composites for Candidate Materials of Flexible Wing Structures, Composites Part A: Applied Science and Manufacturing, 37 (2006) 8.

[12] C. Thill, J.D. Downsborough, J. Lais, I.P. Bond, P. Jones, Aerodynamic Study of Corrugated Skins for Morphing Wing Applications, Aeronautical Journal, 114 (2010) 7.

[13] G. Kress, M. Winkler, Corrugated Laminate Homogenization Model, Composite Structures, 92(3) (2010) 15.

[14] E. Friedrich, Applications of Fracture Mechanics to Composite Materials, Elsevier, 1989.

[15] I.L. Kalinin, Cracks and Defects in Carbon Fibres, In: Strength and fracture of composite materials,  (1983) 8.

[16] M. Lomonov, Deformation, Fracture and Strength of Polymer Composite Materials, Report Institute of Mechanics, 1988.

[17] U.V. Sokolkin, T.A. A., Statistical Models of Deformation and Fracture of Composites, Mechanics of Composite Materials, 5 (1984) 5.

[18] Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites ASTM D5528, in, Annual Book of ASTM Standards, 2007, pp. 12.

[19] T.E. Tay, Characterization and Analysis of Delamination Fracture in Composites: An Overview of Developments from 1990 to 2001, Applied Mechanics Reviews, 56 (2003) 31.

[20] M.M. Shokrieh, Z. A., A Novel Procedure for Prediction of Mixed Mode I/II in Fracture Toughness of Laminate Composites, Iranian Journal of Polymer Science and Technology, 27 (2014) 9.

[21] R. Krueger, the Virtual Crack Closure Technique: History, Approach and Applications, 2002.

[22] P. Prombut, M. L., L. F., B. J.J., Delamination of Multidirectional Composite Laminates at 0//Ө Ply Interfaces, Engineering Fracture Mechanics, 73 (2006) 15.

[23] S. Bennati, C. M., C. D., V. P.S., An Enhanced Beam-Theory Model of the Asymmetric Double Cantilever Beam (ADCB) Test for Composite Laminates, Composites Science and Technology, 69 (2009) 10.

[24] D. Dalli, G. Catalanotti, L.F. Varandas, B.G. Falzon, S. Foster, Mode I intralaminar fracture toughness of 2D woven carbon fibre reinforced composites: A comparison of stable and unstable crack propagation techniques, Engineering Fracture Mechanics, 214 (2019) 21.

[25] A. Zeinedini, M.H. Moradi, H. Taghibeigi, J. J., On the mixed mode I/II/III translaminar fracture toughness of cotton/epoxy laminated composites, Theoretical and Applied Fracture Mechanics, 109 (2020).

[26] M. De Moura, R. Campilho, J.P.M. Gonçalves, Crack equivalent concept applied to the fracture characterization of bonded joints under pure mode I loading, Composite Science and Technology, 68(10) (2008).

[27] T.L. Anderson, Fracture mechanics: fundamentals and applications, CRC press, 2005.

[28]https://abaqus.uclouvain.be/English/SIMACAEBMKRefMap/simabmkcalfanodelamination.htm, in.

[29] G. Alfano, M.A. Crisfield, Finite Element Interface Models for the Delamination Analysis of Laminated Composites: Mechanical and Computational Issues, International Journal for Numerical Methods in Engineering, 50 (2001) 35.

[30] E.A. Bonifaz, Cohesive zone modeling to predict failure processes, Canadian Journal on Mechanical Sciences & Engineering, 2(3) (2011).

[31] P. Robinson, T. Besant, H. D., Delamination Growth Prediction Using a Finite Element Approach, in:  2nd ESIS TC4 Conference on Polymers and Composites, Les Diablerets, Switzerland, 1999.

[32] A.A. Saeid, S.L. Donaldson, Experimental and finite element evaluations of debonding in composite sandwich structure with core thickness variations, Advances in Mechanical Engineering, 8(9) (2016) 18.