پیوندهای مفید
آمار
| تعداد نشریات | 9 |
| تعداد شمارهها | 452 |
| تعداد مقالات | 5,748 |
| تعداد مشاهده مقاله | 8,233,622 |
| تعداد دریافت فایل اصل مقاله | 6,751,325 |
مطالعة تجربی اثر نخهای هدایتکنندة آب تقطیر شده بر روی عملکرد آبشیرینکن خورشیدی پلکانی | ||
| نشریه مهندسی مکانیک امیرکبیر | ||
| مقاله 7، دوره 54، شماره 9، آذر 1401، صفحه 2103-2120 اصل مقاله (1.58 M) | ||
| نوع مقاله: مقاله پژوهشی | ||
| شناسه دیجیتال (DOI): 10.22060/mej.2022.21132.7382 | ||
| نویسندگان | ||
| محمد خلیلی* 1؛ معین طاهری1؛ میلاد صالحی2؛ زهرا سادات اقدامی2 | ||
| 1دانشکده فنی و مهندسی، دانشگاه اراک، اراک، ایران - پژوهشکده فناوریهای نوین، دانشگاه اراک، اراک، ایران | ||
| 2دانشکده فنی و مهندسی، دانشگاه اراک، اراک، ایران | ||
| چکیده | ||
| باتوجه به دسترسی آسان به انرژی خورشید، تصفیه آب با استفاده از انرژی خورشید موردتوجه پژوهشگران میباشد. در این پژوهش، یک دستگاه آبشیرینکن خورشیدی پلکانی ساخته شده و در شهر اراک موردمطالعه آزمایشگاهی قرار گرفته است. به همین منظور، تأثیر پنج متغیر ورودی بر میزان استحصال آب بهعنوان متغیر خروجی، با استفاده از طراحی آزمایش به روش تاگوچی بررسی شده است. متغیرهای ورودی شامل دبی آب شور، زاویة دستگاه، رنگ صفحة جاذب، تعداد و فاصلة نخهای هدایتکنندة آب تقطیرشده در هر ردیف بودهاند. این تحقیق ازاینجهت منحصربهفرد است که از نخهای پلاستیکی برای ایجاد مسیرهایی بر روی سطح شیشه استفاده کرده تا آب تقطیر شده را به مخزن آب شیرین هدایت کند. همچنین بررسی همزمان تأثیر پارامترهای ورودی از نوآوریهای این پژوهش میباشد. بر اساس نتایج بهدستآمده، بیشترین خروجی آب شیرین، به میزان 1975 میلیلیتر بر مترمربع، زمانی حاصل میشود که دبی ورودی آب شور 50 میلیلیتر بر دقیقه، زاویة دستگاه 40 درجه، رنگ صفحة جاذب مشکی، تعداد نخهای هدایتکنندة آب در هر ردیف 2 عدد و فاصلة ردیفها 8 میلیمتر باشد. همچنین استفاده از 2 عدد نخ هدایتکنندة آب در هر ردیف و به فاصلة 8 میلیمتر از همدیگر سبب افزایش میزان استحصال آب بر واحد سطح شده است. | ||
| کلیدواژهها | ||
| بررسی تجربی؛ آبشیرینکن خورشیدی پلکانی؛ نمکزدایی؛ نخ هدایتکنندة آب؛ روش تاگوچی | ||
| عنوان مقاله [English] | ||
| Experimental Study of the Effect of Distilled Water-Conducting Threads on the Performance of Stepped Solar Still | ||
| نویسندگان [English] | ||
| Mohammad Khalili1؛ Moein Taheri1؛ Milad Salehi2؛ Zahra Sadat Eghdami2 | ||
| 1Department of Mechanical Engineering, Faculty of Engineering, Arak University, Arak, Iran | ||
| 2Department of Mechanical Engineering, Faculty of Engineering, Arak University, Arak, Iran | ||
| چکیده [English] | ||
| Academics are interested in solar energy for water purification because it is easily accessible. In this investigation, a stepped solar still was constructed and tested experimentally in Arak. Using the Taguchi design of experiment approach, it was determined how the five input parameters-saline water flow rate, device angle, absorber plate color, number, and spacing of distilled water-conducting threads in each row-affected the amount of freshwater production as the output variable. This research is unique in that it uses plastic threads to create channels on the cover glass surface that lead distilled water to the freshwater tank. In addition, the simultaneous study of the effect of input parameters is one of the innovations of this research. The results showed that when the input saline water flow rate was 50 ml/min, the device angle was 40°, the absorber plate was black, the number of water-conducting threads in each row was 2, and the row spacing was 8 mm, the greatest freshwater output of 1975 ml/m2 was produced. Also, by using two water-conducting threads in each row and spacing them 8 mm apart, the amount of water produced per unit of surface area was increased. | ||
| کلیدواژهها [English] | ||
| Experimental study, Stepped solar still, Desalination, Water-conducting thread, Taguchi method | ||
| مراجع | ||
|
[1] A.H. Elsheikh, V.P. Katekar, O.L. Muskens, S.S. Deshmukh, M. Abd Elaziz, S.M. Dabour, Utilization of LSTM neural network for water production forecasting of a stepped solar still with a corrugated absorber plate, Process Safety and Environmental Protection, 148 (2021) 273-282. [2] S.S.A. Toosi, H.R. Goshayeshi, S.Z. Heris, Experimental investigation of stepped solar still with phase change material and external condenser, Journal of Energy Storage, 40 (2021) 102681. [3] H. Manchanda, M. Kumar, Thermo-techno-economical experimental evaluation of a stepped solar distillation system with energy loss utilization, Process Safety and Environmental Protection, 148 (2021) 473-481. [4] H. Manchanda, M. Kumar, Performance evaluation of a locally designed stepped solar distillation-cum-active drying unit, Journal of Thermal Analysis and Calorimetry, 147(6) (2022) 4383-4395. [5] V. Vijayakumar, N. Manu, M. Vasudevan, M. Kiran, C. Rejeesh, Phase change materials for improved performance and continuous output in stepped solar stills equipped with HDH, Materials Today: Proceedings, 47 (2021) 5064-5068. [6] L.D. Jathar, S. Ganesan, S. Gorjian, An experimental and statistical investigation of concave-type stepped solar still with diverse climatic parameters, Cleaner Engineering and Technology, 4 (2021) 100137. [7] F.A. Essa, Z. Omara, A. Abdullah, S. Shanmugan, H. Panchal, A.E. Kabeel, R. Sathyamurthy, M.M. Athikesavan, A. Elsheikh, M. Abdelgaied, Augmenting the productivity of stepped distiller by corrugated and curved liners, CuO/paraffin wax, wick, and vapor suctioning, Environmental Science and Pollution Research, 28(40) (2021) 56955-56965. [8] T. Mondol, M.A. Islam, Effect of step size and nanofluid on the performance of stepped solar still, in: AIP Conference Proceedings, AIP Publishing LLC, 2021, pp. 050018. [9] V.K. Ramalingam, A. Karthick, M.P.V. Jeyalekshmi, A.M.M.A.J. Decruz, A.M. Manokar, R. Sathyamurthy, Enhancing the fresh water produced from inclined cover stepped absorber solar still using wick and energy storage materials, Environmental Science and Pollution Research, 28(14) (2021) 18146-18162. [10] G.B. Balachandran, P.W. David, A.B. Alexander, M.M. Athikesavan, K.K.S. Kumar, V. Palanichamy, A.E. Kabeel, R. Sathyamurthy, F.P.G. Marquez, A relative study on energy and exergy analysis between conventional single slope and novel stepped absorbable plate solar stills, Environmental Science and Pollution Research, 28(41) (2021) 57602-57618. [11] R. Sathyamurthy, M. Balasubramanian, M. Devarajan, S.W. Sharshir, A.M. Manokar, Experimental study on enhancing the yield from stepped solar still coated using fumed silica nanoparticle in black paint, Materials Letters, 272 (2020) 127873. [12] H. Fayaz, S. Rasachak, M.S. Ahmad, L. Kumar, B. Zhang, M. Mujtaba, M.E.M. Soudagar, R. Kumar, M.R. Omidvar, Improved surface temperature of absorber plate using metallic titanium particles for solar still application, Sustainable Energy Technologies and Assessments, 52 (2022) 102092. [13] A.N. Shmroukh, S. Ookawara, Evaluation of transparent acrylic stepped solar still equipped with internal and external reflectors and copper fins, Thermal Science and Engineering Progress, 18 (2020) 100518. [14] V. Nagaraju, G. Murali, A.K. Bewoor, R. Kumar, M. Sharifpur, M.E.H. Assad, M.M. Awad, Experimental study on performance of single slope solar still integrated with sand troughs, Sustainable Energy Technologies and Assessments, 50 (2022) 101884. [15] K.E. Amori, Hydrogel materials as absorber for improving water evaporation with solar still, desalination and wastewater treatment, Materials Today: Proceedings, 60 (2022) 1548-1553. [16] T. Sakthivel, T. Arjunan, L. Natrayan, P. Kumar, P.P. Patil, R. Manikandan, A. Muniappan, P. Paramasivam, Experimental investigation on the effectiveness of solar still and its effect on adsorption with various dyes, Adsorption Science & Technology, 2022 (2022). [17] S.J.P. Gnanaraj, V. Velmurugan, An experimental investigation to optimize the production of single and stepped basin solar stills-a Taguchi approach, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, (2020) 1-24. [18] H. Panchal, D. Mevada, K.K. Sadasivuni, F. Essa, S. Shanmugan, M. Khalid, Experimental and water quality analysis of solar stills with vertical and inclined fins, Groundwater for Sustainable Development, 11 (2020) 100410. [19] S.K. Nougriaya, M. Chopra, B. Gupta, P. Baredar, Stepped solar still: A review on designs analysis, Materials Today: Proceedings, 46 (2021) 5647-5660. [20] H. Panchal, R. Sathyamurthy, A. Kabeel, S. El-Agouz, D. Rufus, T. Arunkumar, A. Muthu Manokar, D.P. Winston, A. Sharma, N. Thakar, Annual performance analysis of adding different nanofluids in stepped solar still, Journal of Thermal Analysis and Calorimetry, 138(5) (2019) 3175-3182. [21] L. Xiao, R. Shi, S.-Y. Wu, Z.-L. Chen, Performance study on a photovoltaic thermal (PV/T) stepped solar still with a bottom channel, Desalination, 471 (2019) 114129. [22] A.-E.E. Kabeel, H.A.E.D. Mohamad, S. Majeed, Comparative Experimental Study Between Conventional Stepped Solar Still and an Active Stepped Solar Still Incorporated with a Water Circulation System, Journal of Engineering Research, 3(June) (2019) 48-52. [23] Z. Omara, A.E. Kabeel, M. Younes, Enhancing the stepped solar still performance using internal reflectors, Desalination, 314 (2013) 67-72. [24] A. Kabeel, A. Khalil, Z. Omara, M. Younes, Theoretical and experimental parametric study of modified stepped solar still, Desalination, 289 (2012) 12-20. [25] A. Kabeel, Z. Omara, M. Younes, Techniques used to improve the performance of the stepped solar still—A review, Renewable and Sustainable Energy Reviews, 46 (2015) 178-188. [26] A.J.N. Khalifa, A.M. Hamood, Experimental validation and enhancement of some solar still performance correlations, Desalination and water treatment, 4(1-3) (2009) 311-315. [27] M. Assari, R. Mirzavand, H. Basirat Tabrizi, A. Jafar Gholi Beik, Effect of steps height and glass cover angle on heat transfer performance for solar distillation: Numerical study, International Journal of Engineering, 35(1) (2022) 237-247. [28] P. Gleick, E. Chalecki, A. Wong, Measuring Water Well-Being: Water Indicators and Indices. In “The world’s water, 2002-2003: the biennial report on freshwater resources” Ed. Gleick, in, PH Island Press. Washington, DC, 2002. [29] A. Atarodi, H. Karami, A. Ardeshir, K. Hosseini, Optimization of the Geometric Parameters of the Protective Spur Dike using Taguchi Method and GRA, JWSS-Isfahan University of Technology, 24(1) (2020) 13-26. [30] G. Taguchi, S. Chowdhury, Y. Wu, Taguchi's quality engineering handbook, John Wiley & Sons, 2004. [31] S. Theodoridis, K. Koutroumbas, Pattern recognition, Elsevier, 2006. [32] H. Al-Hinai, M. Al-Nassri, B. Jubran, Parametric investigation of a double-effect solar still in comparison with a single-effect solar still, Desalination, 150(1) (2002) 75-83. [33] A.S. Nafey, M. Abdelkader, A. Abdelmotalip, A. Mabrouk, Parameters affecting solar still productivity, Energy conversion and management, 41(16) (2000) 1797-1809. [34] A.J.N. Khalifa, On the effect of cover tilt angle of the simple solar still on its productivity in different seasons and latitudes, Energy conversion and management, 52(1) (2011) 431-436. [35] M.A.b.H.M. Yakup, A. Malik, Optimum tilt angle and orientation for solar collector in Brunei Darussalam, Renewable Energy, 24(2) (2001) 223-234. [36] D.C. Montgomery, Design and analysis of experiments, John wiley & sons, 2017. [37] M.R. Delozier, S. Orlich, Discovering influential cases in linear regression with MINITAB: Peeking into multidimensions with a MINITAB macro, Statistical Methodology, 2(2) (2005) 71-81. [38] A. Alaudeen, K. Johnson, P. Ganasundar, A.S. Abuthahir, K. Srithar, Study on stepped type basin in a solar still, Journal of King Saud University-Engineering Sciences, 26(2) (2014) 176-183. [39] M. Al-harahsheh, M. Abu-Arabi, H. Mousa, Z. Alzghoul, Solar desalination using solar still enhanced by external solar collector and PCM, Applied Thermal Engineering, 128 (2018) 1030-1040. [40] A. Kabeel, R. Sathyamurthy, D. Mageshbabu, B. Madhu, P. Anand, P. Balakrishnan, Effect of mass flow rate on fresh water improvement from inclined PV panel basin solar still, Materials Today: Proceedings, 32 (2020) 374-378. | ||
|
آمار تعداد مشاهده مقاله: 1,476 تعداد دریافت فایل اصل مقاله: 1,021 |
||