روکش‌کاری فولاد کم آلیاژ 4340 AISI با فولادهای زنگ نزن آستنیتی و پایه کبالت استلایت 6 به روش جوشکاری قوسی تنگستن-گاز و بررسی ریز ساختار و رفتار سایشی لایه حاصل

[1] A. Zmitrowicz, Wear patterns and laws of wear–a review, Journal of theoretical and applied mechanics, 44(2) (2006) 219-253.

[2] S. Wang, Y. Chen, C. Gu, Q. Sai, T. Lei, J. Williams, Antifouling coatings fabricated by laser cladding, Coatings, 13(2) (2023) 397.

[3] S.Bakhshi, A. Mirek, Investigating the effect of low temperature isothermal heat treatment on the mechanical properties and fracture toughness of AISI 4340 super high strength steel sheet. Metallurgical Engineering, 22(4 (76)), (2018) 307-316. (in persian).

[4] H.-z. Wang, Y.-h. Cheng, J.-y. Yang, X.-b. Liang, Microstructure and properties of Fe based amorphous coatings deposited by laser cladding under different preheating temperatures, Journal of Non-Crystalline Solids, 602 (2023) 122081.

[5] M. Sabzi, S.M. Anijdan, A.B. Chalandar, N. Park, H. Jafarian, A. Eivani, An experimental investigation on the effect of gas tungsten arc welding current modes upon the microstructure, mechanical, and fractography properties of welded joints of two grades of AISI 316L and AISI310S alloy metal sheets, Materials Science and Engineering: A, 840 (2022) 142877.

[6] N. Murugan, R. Parmar, Stainless steel cladding deposited by automatic gas metal arc welding, Welding Journal-Including Welding Research Supplement, 76(10) (1997) 391s.

[7] N. Najari, M. Shamanian, A. Saatchi, Hardfacing of stellite 6 on plain carbon steel and evaluation of the effect of a martensitic and austenitic stainless steel interlayer, iranian journal of surface science and engineering6(9) (2010)55-65.

[8] H. sabet, reconstruction of worn parts by welding method, first edition, Amir Publishing House,1(1) )2012)8.)in persian)

 [9] F.Abdi, H.Sabet, A.KhoramPour, Investigating the effect of dilution degree and interface layer on the wear resistance of Fe-Cr-C base hard coating layer welded by SMAW method on plain carbon steel, Scientific-Research Quarterly of Modern Materials, 11(40) (2020) 133- 132.

[10]M.M. Jafari, A.Afsari, S.A,BehGozin, S.Heydari, The effect of filler metal on the mechanical and tribological properties of 6959/1 steel joint using TIG welding process, Iranian Scientific-Research Journal of Welding Science and Technology, 8(2) (2023) 97-112.

[11] S. Da Sun, Q. Liu, M. Brandt, M. Janardhana, G. Clark, Microstructure and mechanical properties of laser cladding repair of AISI 4340 steel, in: Proceedings of the 28th International Congress of the Aeronautical Sciences, Optimage, )2012(1-9.

[12] T. Li, L. Zhang, G.G.P. Bultel, T. Schopphoven, A. Gasser, J.H. Schleifenbaum, R. Poprawe, Extreme high-speed laser material deposition (EHLA) of AISI 4340 steel, Coatings, 9(12) (2019) 778.

[13] S. Sun, R. Mohammed, M. Brandt, G. Clark, Q. Liu, M. Janardhana, Analysis of Defects in High Power Laser Cladding of High Strength Steel for Aerospace Application, Incorporating Sustainable Practice in Mechanics and Structures of Materials, 111(2010)1-7.

[14] A. Gholipour, M. Shamanian, F. Ashrafizadeh, Microstructure and wear behavior of stellite 6 cladding on 17-4 PH stainless steel, Journal of Alloys and Compounds, 509(14) (2011) 4905-4909.

[15] H. So, C. Chen, Y. Chen, Wear behaviours of laser-clad stellite alloy 6, Wear, 192(1-2) (1996) 78-84.

[16] L.P. Martin, A. Luccitti, M. Walluk, Evaluation of additive friction stir deposition of AISI 316L for repairing surface material loss in AISI 4340, The International Journal of Advanced Manufacturing Technology, 121(3-4) (2022) 2365-2381.

[17] J. Wu, F. Cao, T. Sun, G. Huang, M. Li, W. Hou, Z. Piao, Z. Shen, Y. Shen, Developing ultrafine-grained structure with balanced α/γ fraction via underwater friction stir processing enables enhanced wear and corrosion resistance of duplex stainless steel, Surface and Coatings Technology, 457 (2023) 129295.

[18] W. Wu, L.-T. Wu, The wear behavior between hardfacing materials, Metallurgical and Materials Transactions A, 27 (1996) 3639-3648.

[19] S.C. Bozeman, O.B. Isgor, J.D. Tucker, Effects of processing conditions on the solidification and heat-affected zone of 309L stainless steel claddings on carbon steel using wire-directed energy deposition, Surface and Coatings Technology, 444 (2022) 128698.

[20] A. Kusmoko, D. Dunne, H. Li, Effect of heat input on Stellite 6 coatings on a medium carbon steel substrate by laser cladding, Materials Today: Proceedings, 2(4-5) (2015) 1747-1754.

[21] D. Bartkowski, W. Matysiak, K. Wojtko, Stellite-6 surface layers reinforced with hard and refractory WC particles produced on steel for metal forming, in: IOP Conference Series: Materials Science and Engineering, IOP Publishing, (2018) 012093.

[22] M. Arivarasu, D. Ramkumar Kasinath, A. Natarajan, Effect of continuous and pulsed current on the metallurgical and mechanical properties of gas tungsten arc welded AISI 4340 aeronautical and AISI 304 L austenitic stainless steel dissimilar joints, Materials Research, 18 (2015) 59-77.

[23] M. Barmaki, K.Amini, The effect of the presence of the middle layer of austenitic stainless steel 309 on the microstructure and mechanical properties of plain carbon steel St52 coated with high chrome-carbon electrode by fusion welding method, Iran Construction and Production Engineering, 5(2) 2018) 34-42. (in persian)

[24] Q. Jing, Y. Tan, Microstructure and tribological properties of cobalt-based Stellite 6 alloy coating by electro-spark deposition, Materials Research, 16 (2013) 1071-1076.