پیوندهای مفید
آمار
| تعداد نشریات | 9 |
| تعداد شمارهها | 448 |
| تعداد مقالات | 5,739 |
| تعداد مشاهده مقاله | 8,089,355 |
| تعداد دریافت فایل اصل مقاله | 6,582,277 |
ارزیابی تجربی و تحلیلی اثر پارامترهای فرآیند تنشزدایی ارتعاشی نمونه فولادی بر اساس مدل محاسباتی | ||
| نشریه مهندسی مکانیک امیرکبیر | ||
| دوره 56، شماره 1، 1403، صفحه 3-30 اصل مقاله (1.79 M) | ||
| نوع مقاله: مقاله پژوهشی | ||
| شناسه دیجیتال (DOI): 10.22060/mej.2024.22820.7681 | ||
| نویسندگان | ||
| مهدی جعفری وردنجانی* ؛ سعید امینی | ||
| گروه مهندسی مکانیک، دانشگاه فنی و حرفهای، تهران، ایران | ||
| چکیده | ||
| در حال حاضر تنشزدایی ارتعاشی جایگزین مناسبی برای تنشزدایی حرارتی جهت کاهش تنش پسماند محسوب میشود. در این مطالعه یک مدل تئوری بر اساس روابط تحلیلی و محاسباتی ارائه شده است. رابطه پیشنهادی از نظر متغیرهای فرکانس، دامنه و زمان ارتعاش اصلاح شده است تا پارامترهای کاربردیتری را در مقایسه با مدلهای قبلی شامل شود. بنابراین پارامترهای ضروری روش ارتعاشی شامل تعداد سیکل به عنوان مدّت فرآیند، نرخ کرنش به عنوان بسامد بارگذاری، و دامنه به عنوان بار در مدل تعبیه شده است. آزمایشات تجربی جهت اندازهگیری توزیع تنش پسماند با روش پراش اشعه ایکس برای نقاط خاصی انجام شده است تا نتایج آن با نتایج مدل مقایسه شود. محدوده خطای قابل کنترلی (زیر 10 درصد) بین نتایج تئوری و تجربی مشاهده شده است. با توجّه به نتایج بدستآمده، مدل از لحاظ محاسبه توزیع تنش پسماند پس از انجام فرآیند نسبت به نتایج آزمایش تجربی مشابه عملکرد قابل قبولی داشته است. طبق نتایج بدست آمده پارامتر دامنه ارتعاش، حدود 19% موثّرتر از سایر پارامترها بوده است. همچنین افزایش دامنه، اثر مثبت پارامتر فرکانس را به میزان 38% بیش از سایر پارامترها افزایش داده است. جهت بررسی عمیقتر مدل، نرخ تغییرات توزیع تنش نیز نسبت به پارامترهای مذکور بررسی شده است. | ||
| کلیدواژهها | ||
| تنشزدایی ارتعاشی؛ مدل محاسباتی؛ تنش پسماند؛ توزیع تنش؛ نمونه فولادی | ||
| عنوان مقاله [English] | ||
| Experimental and Analytical Evaluation of the Vibrational Stress Relief Process Parameters on the Steel Specimen Based on the Computational Model | ||
| نویسندگان [English] | ||
| Mehdi Jafari Vardanjani؛ Saeed Amini | ||
| Department of Mechanical Engineering, Technical and Vocational University (TVU), Tehran, Iran | ||
| چکیده [English] | ||
| The vibration stress relief process is currently utilized as a suitable alternative to the thermal stress relief method to reduce the residual stress of various alloys. In this study, a theoretical model based on the analytical equations is presented. The proposed model including the frequency, amplitude, and process time has been revised compared to the previously proposed models to make it more comprehensible and applicable. Thus, the assumed parameters including the number of cycles (duration), the strain rate (loading frequency), and the amplitude (loading value) are embedded in the model. Experimental tests measuring residual stress distribution by X-ray diffraction method are conducted on specific spots to compare the results with the experiments. An acceptable range of error (below 10%) has been observed between the theoretical and experimental results. According to the obtained results, the model has an acceptable performance for residual stress calculation after the process. According to the results, vibration amplitude has been about 19% more effective than the other parameters. In addition, increasing the amplitude has increased the affirmative effect of the frequency parameter by 38% compared to the other parameters. To further examine the presented model, the variations of the stress rate have been analyzed versus each influential parameter. | ||
| کلیدواژهها [English] | ||
| Vibration stress relief, Computational model, Residual stress, Steel specimen | ||
| مراجع | ||
|
[1] R. Pradhan, S. Mohapatra, M.R. Sunny, A. Sarkar, An investigation on microstructure-texture of E250BR steel plate subjected to post-weld vibration, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, (2023) 09544054231178972. [2] A. Tabatabaeian, A.R. Ghasemi, M.M. Shokrieh, B. Marzbanrad, M. Baraheni, M. Fotouhi, Residual stress in engineering materials: a review, Advanced engineering materials, 24(3) (2022) 2100786. [3] R. Dawson, Residual stress relief by vibration, University of Liverpool, 1975. [4] R. McGoldrick, H.E. Saunders, SOME EXPERIMENTS IN STRESS‐RELIEVING CASTINGS AND WELDED STRUCTURES BY VIBRATION, Journal of the American Society for Naval Engineers, 55(4) (1943) 589-609. [5] P. Sędek, M.S. Węglowski, Application of mechanical vibration in the machine building technology, Key Engineering Materials, 504 (2012) 1383-1388. [6] I.K. Lokshin, Vibration treatment and dimensional stabilization of castings, RUSS CAST PROD, (10) (1965) 454-457. [7] H. Moore, A Study of Residual Stresses and Size Effect and a Study of the Effect of Repeated Stresses on Residual Stresses Due to Shot Peening of Two Steels, Proc. Soc. Exp. Stress Anal, 2(1) (1944) 170-177. [8] S. Chen, H. Gao, M. Lin, S. Wu, Q. Wu, Research on process optimization and rapid prediction method of thermal vibration stress relief for 2219 aluminum alloy rings, Reviews on Advanced Materials Science, 61(1) (2022) 292-305. [9] A. Jurcius, A. Valiulis, O. Černašėjus, K. Kurzydlowski, A. Jaskiewicz, M. Lech-Grega, Influence of vibratory stress relief on residual stresses in weldments and mechanical properties of structural steel joint, Journal of Vibroengineering, 12(1) (2010). [10] K. Liao, Y.-X. Wu, J.-K. Guo, Application of VSR technique in stress reduction of aluminum alloy thick plate and its limitation, Zhendong yu Chongji(Journal of Vibration and Shock), 31(14) (2012) 70-73. [11] M. Bilal Khan, T. Iqbal, Vibratory stress relief in D-406 aerospace alloy, in: TMS Annual Meeting, 2009, pp. 807-814. [12] J.-S. Wang, C.-C. Hsieh, C.-M. Lin, C.-W. Kuo, W. Wu, Texture evolution and residual stress relaxation in a cold-rolled Al-Mg-Si-Cu alloy using vibratory stress relief technique, metallurgical and Materials Transactions A, 44(2) (2013) 806-818. [13] W. He, B.P. Gu, J.Y. Zheng, R.J. Shen, Research on high-frequency vibratory stress relief of small Cr12MoV quenched specimens, Applied Mechanics and Materials, 157 (2012) 1157-1161. [14] J.S. Wang, C.-w. Kuo, C.-C. Hsieh, H.C. Liao, W. Wu, The effects of waveform in residual stress relief by vibration technique, ASM Proceedings of the International Conference: Trends in Welding Research, (2013) 427-431. [15] H. Gao, X. Li, B. Li, Q. Wu, Y. Ma, X. Jian, H. Song, S. Chen, Residual stress and microstructure of Ti6Al4V treated by thermal-vibratory stress relief process, Journal of Materials Research and Technology, 18 (2022) 5161-5181. [16] A. Zangeneh, I. Sattarifar , M. Noghabi, A Numerical and Experimental Study on Fatigue Crack Growth of Ti-6Al-4V Specimens in Presence of Tensile Residual Stresses, Amirkabir Journal of Mechanical Engineering, 55(4) (2023) 543-554. [17] C. Lin, S. Wu, S. Lü, P. An, L. Wan, Effects of ultrasonic vibration and manganese on microstructure and mechanical properties of hypereutectic Al–Si alloys with 2% Fe, Intermetallics, 32 (2013) 176-183. [18] Z. Huo, B. Gu, Z. Jin, Z. Wang, P. Wang, X. Hu, G. Xu, J. Lai, The Design of High-frequency Vibratory Stress Relief Device, International Core Journal of Engineering, 7(2) (2021) 288-292. [19] V. Kahya, Turan, M., Vibration and stability analysis of functionally graded sandwich beams by a multi-layer finite element, Composites Part B: Engineering, 146 (2018) 198-212. [20] B. Kılıç, Ö. Özdemir, Vibration and stability analyses of functionally graded beams, vol. 68(No 1) (2021) 93-113-193-113. [21] H. Song, H. Gao, Q. Wu, Y. Zhang, Effects of segmented thermal-vibration stress relief process on residual stresses, mechanical properties and microstructures of large 2219 Al alloy rings, Journal of Alloys and Compounds, 886 (2021) 161269. [22] Z. Gao, Y. Zhang, H. Gao, Q. Wu, Experimental study and simulation analysis of thermal-vibratory stress relief treatment of Al-Cu-Mg alloy plate, Journal of Manufacturing Processes, 92 (2023) 124-134. [23] F. Tatar, A.-H. Mahmoudi, A. Shooshtari, Vibratory Stress Relief of Welded Austenite Stainless Steel Plates: Numerical and Experimental Approach, Iranian Journal of Materials Forming, 8(1) (2021) 50-64. [24] S. Kwofie, Plasticity model for simulation, description and evaluation of vibratory stress relief, Materials Science and Engineering: A, 516(1-2) (2009) 154-161. [25] S. Aoki, T. Nishimura, T. Hiroi, S. Hirai, Reduction method for residual stress of welded joint using harmonic vibrational load, Nuclear Engineering and Design, 237(2) (2007) 206-212. [26] D. Rao, D. Wang, L. Chen, C. Ni, The effectiveness evaluation of 314L stainless steel vibratory stress relief by dynamic stress, International Journal of Fatigue, 29(1) (2007) 192-196. [27] H. Wang, Z. Wang, The Embedded VSR System Design Based on ARM and Frequency Spectrum Analysis, in: 2008 IEEE Pacific-Asia Workshop on Computational Intelligence and Industrial Application, 2008, pp. 488-492. [28] M.J. Vardanjani, M. Ghayour, R.M. Homami, Analysis of the Vibrational Stress Relief for Reducing the Residual Stresses Caused by Machining, Experimental Techniques, 40(2) (2016) 705-713. [29] A. Belyakov, Microstructure and Mechanical Properties of Structural Metals and Alloys, Materials, 12(2) (2019) 526-535. [30] G. Huang, B. Li, The combined magnetic-vibration stress relief, Results in Physics, 47 (2023) 106372. [31] S. Li, Y. Kang, G. Zhu, S. Kuang, Effects of strain rates on mechanical properties and fracture mechanism of DP780 dual phase steel, Journal of Materials Engineering and Performance, 24(6) (2015) 2426-2434. [32] S. Chen, J. Ma, H. Gao, Y. Wang, X. Chen, Research on Residual Stresses and Microstructures of Selective Laser Melted Ti6Al4V Treated by Thermal Vibration Stress Relief, Micromachines, 14(2) (2023) 354. [33] A. Grudz, REDUCING WELDING STRESSES IN PLATES BY VIBRATION, AUTOMATIC WELDING USSR, 25(7) (1972) 70-71. [34] G. Huang, R. Liu, S. Hu, Investigation of the mechanism for reduction of residual stress through magnetic-vibration stress relief treatment, Journal of Magnetism and Magnetic Materials, 582 (2023) 171041. [35] L. Zhao, R. Mo, Y. Li, G. Cai, Influence of the Nonlinear Stiffness Parameter of the Vibratory Stress Relief Device on Strong Nonlinear Superharmonic Resonance, IEEE Access, 9 (2021) 6899-6906. [36] S. Weiss, G. Baker, R. Gupta, Vibrational residual stress relief in a plain carbon steel weldment, Welding Research Supplement, (1976) 47-50. [37] G. Adoyan, A. Gerchikov, E.C. Gini, The Effectiveness of the Vibration Ageing of Iron Castings, Russian Castings Production, (1964) 83-85. [38] G. Wozney, G. Crawmer, An investigation of vibrational stress relief in steel, Welding Journal, 47(9) (1968) S411-&. [39] D. Yang, R. Guo, Experimental study on modulus and hardness of ettringite, Experimental techniques, 38(1) (2014) 6-12. [40] H. Buhler, H. Pfalzgraf, Investigations Into the Removal of Internal Stresses in Cast Iron and Steel by Mechanical Vibration and Continued Holding in the Atmosphere, in, VDI Verlag, 1962. [41] Y.P. Yang, Understanding of Vibration Stress Relief with Computation Modeling, Journal of Materials Engineering and Performance, 18 (2009) 856-862. [42] H.-c. YIN, G.-y. ZHANG, H.-y. YAN, RELIEVING RESIDUAL STRESSES OF THE WELDING WORKPIECE IN THE STEEL STRUCTURE BY VIBRATORY STRESS RELIEF [J], Engineering Mechanics, 7(7) (2009) 188-191. [43] A.G. Hebel III, VIBRATIONAL CONDITIONING OF METALS, Materials Processing Technology, 21(2) (2000) 165-179. [44] E. Pattinson, D. Dugdale, Fading of residual stresses due to repeated loading, Metallurgia, 66(397) (1962) 228. [45] P. Vergeer, Vibration isolation of dimple plate heat exchangers, North-West University, North-West University, 2013. [46] A. Munsi, A. Waddell, C. Walker, Modification of welding stresses by flexural vibration during welding, science and technology of welding and joining, 6(3) (2001) 133-138. [47] T.-R. Jia, Z.-M. Zhang, C.-A. Tang, Y.-J. Zhang, Numerical Simulation of Stress-Relief Effects of Protective Layer Extraction Archives of Mining Sciences, 58(2) (2013) 521-540. [48] s.M. Mirfalah Nasiri, A. Basti, R. Hashemi, A. Darvizeh, Theoretical Analysis of the Temperature and Strain Rate Effects on the Forming Limit Diagram of AA3104, Amirkabir Journal of Mechanical Engineering, 52(3) (2018) 555-570. | ||
|
آمار تعداد مشاهده مقاله: 848 تعداد دریافت فایل اصل مقاله: 775 |
||