پیوندهای مفید
آمار
| تعداد نشریات | 8 |
| تعداد شماره‌ها | 414 |
| تعداد مقالات | 5,478 |
| تعداد مشاهده مقاله | 6,010,638 |
| تعداد دریافت فایل اصل مقاله | 5,299,937 |
Impact analysis on curved sandwich beam using numerical simulation | ||
| AUT Journal of Modeling and Simulation | ||
| دوره 55، شماره 2، اسفند 2023، صفحه 263-274 اصل مقاله (1.7 M) | ||
| نوع مقاله: Research Article | ||
| شناسه دیجیتال (DOI): 10.22060/miscj.2024.22606.5334 | ||
| نویسندگان | ||
| Mehdi Ranjbar-Roeintan* ؛ Mohammad-Hadi Larti | ||
| Department of Mechanical Engineering, Kermanshah University of Technology, Kermanshah, Iran | ||
| چکیده | ||
| Considering the greater resistance of curved beams compared to straight beams, the purpose of this research is to investigate the response of curved beams against low-velocity impact using numerical methods. Using ABAQUS finite element software, a curved beam with three layers in the form of a sandwich beam under the impact of a rigid body with a spherical tip is simulated. Hexagonal elements are considered for the curved beam, which has more numbers as they approach the target impact site. A simply supported boundary condition is considered for both sides of the beam. To verify the accuracy of the simulation results in this article, the impact response is compared with what is theoretically obtained in another research. The results show that with the increment in the curved beam radius, assuming that its angle is constant, the second peak related to the impact load and the absolute value of the impactor's residual velocity is decreased, but the maximum displacement of the impactor is incremented. Also, the maximum von Mises stress value is decreased with the increment in curved beam radius, but the range of maximum von Mises stress has become wider. It is seen that for a constant curved beam radius, the impactor's final velocity decreases, but no clear trend is observed for the impact load changes and the impactor's displacement. | ||
| کلیدواژه‌ها | ||
| Curved Beam؛ Sandwich Structures؛ ABAQUS FE code؛ Low-Velocity Impact | ||
| مراجع | ||
|
[1] M. Ranjbar, S. Feli, Temperature-dependent analysis of axially functionally graded CNT reinforced micro-cantilever beams subjected to low velocity impact, Mechanics of Advanced Materials and Structures, 26(13) (2019) 1154-1168.
[2] M. Ranjbar, S. Feli, Low velocity impact analysis of an axially functionally graded carbon nanotube reinforced cantilever beam, Polymer Composites, 39(S2) (2018) E969-E983.
[3] M. Ranjbar, S. Feli, Mechanical and low-velocity impact properties of epoxy-composite beams reinforced by MWCNTs, Journal of composite materials, 53(5) (2019) 693-705.
[4] R.S.S. Alhusseini, A.S.G. Qanber, B.D.H. Al-Kasob, M.H. Jasim, M. Ranjbar, Effect of graphene on the methyl methacrylate beam under lateral low-velocity impact, World Journal of Engineering, 18(3) (2021) 389-396.
[5] A.S.G. Qanber, R.S.S. Alhusseini, B.D.H. Al-Kasob, M.H. Jasim, M. Ranjbar, Effect of the multiple projectile on the low-velocity impact response of CNTs reinforced beam, Multidiscipline Modeling in Materials and Structures, 17(1) (2020) 1-17.
[6] M.H. Jasim, A.M.A. Al-Araji, B.D.H. Al-Kasob, M. Ranjbar, Analytical analysis of jute–epoxy beams subjected to low-velocity impact loading, International Journal of Structural Integrity, 12(3) (2021) 428-438.
[7] M.S. Hassan, H.T. Shomran, A.A. Abbas, B.D.H. Al-Kasob, M.H. Jasim, M. Ranjbar, Multi-layer polymer beam reinforced by graphene platelets on low velocity impact response, Pigment & Resin Technology, 51(3) (2022) 320-326.
[8] P. Malekzadeh, M.G. Haghighi, M. Atashi, Out-of-plane free vibration of functionally graded circular curved beams in thermal environment, Composite Structures, 92(2) (2010) 541-552.
[9] J. Wu, F. Lin, H. Shaw, Free in-plane vibration analysis of a curved beam (arch) with arbitrary various concentrated elements, Applied Mathematical Modelling, 37(14-15) (2013) 7588-7610.
[10] S. Rajasekaran, Analysis of curved beams using a new differential transformation based curved beam element, Meccanica, 49 (2014) 863-886.
[11] L. Jun, R. Guangwei, P. Jin, L. Xiaobin, W. Weiguo, Free vibration analysis of a laminated shallow curved beam based on trigonometric shear deformation theory, Mechanics Based Design of Structures and Machines, 42(1) (2014) 111-129.
[12] A.-T. Luu, N.-I. Kim, J. Lee, Isogeometric vibration analysis of free-form Timoshenko curved beams, Meccanica, 50 (2015) 169-187.
[13] R.-A. Jafari-Talookolaei, M. Abedi, M. Hajianmaleki, Vibration characteristics of generally laminated composite curved beams with single through-the-width delamination, Composite Structures, 138 (2016) 172-183.
[14] T.-A. Huynh, A.-T. Luu, J. Lee, Bending, buckling and free vibration analyses of functionally graded curved beams with variable curvatures using isogeometric approach, Meccanica, 52 (2017) 2527-2546.
[15] N. Mohamed, M. Eltaher, S. Mohamed, L. Seddek, Numerical analysis of nonlinear free and forced vibrations of buckled curved beams resting on nonlinear elastic foundations, International Journal of Non-Linear Mechanics, 101 (2018) 157-173.
[16] F. Yang, R. Sedaghati, E. Esmailzadeh, Free in-plane vibration of curved beam structures: a tutorial and the state of the art, Journal of Vibration and Control, 24(12) (2018) 2400-2417.
[17] B. Anirudh, M. Ganapathi, C. Anant, O. Polit, A comprehensive analysis of porous graphene-reinforced curved beams by finite element approach using higher-order structural theory: Bending, vibration and buckling, Composite Structures, 222 (2019) 110899.
[18] S.-Q. Ye, X.-Y. Mao, H. Ding, J.-C. Ji, L.-Q. Chen, Nonlinear vibrations of a slightly curved beam with nonlinear boundary conditions, International Journal of Mechanical Sciences, 168 (2020) 105294.
[19] M.S. Beg, M.Y. Yasin, Bending, free and forced vibration of functionally graded deep curved beams in thermal environment using an efficient layerwise theory, Mechanics of Materials, 159 (2021) 103919.
[20] T. Liu, W. Liang, Q. Wang, B. Qin, C. Guo, A. Wang, Random vibration study of functionally graded porous curved beams with elastically restrained ends, Engineering Structures, 270 (2022) 114874.
[21] S. Karampour, E. Ghavanloo, S.A. Fazelzadeh, Free vibration analysis of elastic metamaterial circular curved beams with locally resonant microstructures, Archive of Applied Mechanics, 93(1) (2023) 323-333.
[22] E. Sadeghpour, M. Afshin, M. Sadighi, A theoretical investigation on low-velocity impact response of a curved sandwich beam, International Journal of Mechanical Sciences, 101 (2015) 21-28.
[23] A.K. Miri, A. Nosier, Out-of-plane stresses in composite shell panels: layerwise and elasticity solutions, Acta mechanica, 220 (2011) 15-32.
[24] I. Ahmadi, Free edge stress prediction in thick laminated cylindrical shell panel subjected to bending moment, Applied Mathematical Modelling, 65 (2019) 507-525.
[25] I. Ahmadi, Three-dimensional stress analysis in torsion of laminated composite bar with general layer stacking, European Journal of Mechanics-A/Solids, 72 (2018) 252-267.
[26] I. Ahmadi, Edge stresses analysis in thick composite panels subjected to axial loading using layerwise formulation, Structural engineering and mechanics: An international journal, 57(4) (2016) 733-762.
[27] A. Nosier, A.K. Miri, Boundary-layer hygrothermal stresses in laminated, composite, circular, cylindrical shell panels, Archive of Applied Mechanics, 80 (2010) 413-440. | ||
|
آمار تعداد مشاهده مقاله: 195 تعداد دریافت فایل اصل مقاله: 161 |
||