پیوندهای مفید
آمار
| تعداد نشریات | 9 |
| تعداد شمارهها | 446 |
| تعداد مقالات | 5,719 |
| تعداد مشاهده مقاله | 8,018,492 |
| تعداد دریافت فایل اصل مقاله | 6,527,293 |
Prediction of the shear strength of SCS Panel with Box Profile shear connectors using numerical modeling and GEP algorithm | ||
| AUT Journal of Civil Engineering | ||
| دوره 9، شماره 2، 2025، صفحه 111-128 اصل مقاله (1.44 M) | ||
| نوع مقاله: Research Article | ||
| شناسه دیجیتال (DOI): 10.22060/ajce.2025.23851.5904 | ||
| نویسندگان | ||
| Seyed Hashem Khatibi؛ Hamed Ghohani Arab* ؛ mahmoud miri | ||
| Department of Civil Engineering, University of Sistan and Baluchestan, Zahedan, Iran. | ||
| چکیده | ||
| Steel-concrete-steel (SCS) sandwich structures consist of two steel faceplates and a concrete core, interconnected through mechanical shear connectors to form an integrated composite system. Among various shear connectors, box-profile (BP) shear connectors have demonstrated superior shear strength. Despite this, no equation has been developed to estimate the shear strength of BP shear connectors, unlike the well-established provisions for stud-bolt connectors. This study aims to address this gap by proposing a predictive equation for the shear strength of BP shear connectors using the Taguchi design of experiments (DOE). Key parameters, including the thickness, width, and yield strength of BP shear connectors, as well as the thickness and compressive strength of the concrete core, were systematically analyzed. A total of 32 specimens were designed, and their behavior was validated through experimental push-out tests and simulations, focusing on failure modes and load-slip curves. Finite element (FE) analysis and gene expression programming (GEP) were employed to develop a predictive equation incorporating two failure modes: concrete failure and BP failure. The proposed equation was rigorously evaluated against existing code provisions using statistical metrics such as root-mean-square error (RMSE), mean absolute percentage error (MAPE), and Nash-Sutcliffe efficiency (NSE). Results demonstrated the superior accuracy and reliability of the proposed model. This study provides a robust framework for designing BP shear connectors, addressing a critical gap in the design of SCS sandwich structures and advancing their practical application. | ||
| کلیدواژهها | ||
| Steel-Concrete-Steel؛ BP Connectors؛ Shear Connectors؛ Push-out؛ SCS | ||
| مراجع | ||
|
[1] R.S.N. Shariati M, Shariati A, Kueh ABH, Comparative performance of channel and angle shear connectors in high-strength concrete composites: An experimental study, Constr Build Mater, (92) (2016) 120:382.
[2] N. Malek, Steel-concrete sandwich members without shear reinforcement, Transactions of Japan Concrete Institute (23) (1993) p 27–34.
[3] Z. Huang, J.R. Liew, Nonlinear finite element modelling and parametric study of curved steel–concrete–steel double skin composite panels infilled with ultra-lightweight cement composite, Construction and Building Materials, 95 (2015) 922–938.
[4] Y. Lin, J. Yan, Y. Wang, F. Fan, C. Zou, Shear failure mechanisms of SCS sandwich beams considering bond-slip between steel plates and concrete, Engineering Structures, 181 (2019) 458–475.
[5] Y. Lin, J. Yan, Z. Cao, X. Zeng, F. Fan, C. Zou, Ultimate strength behaviour of S-UHPC-S and SCS sandwich beams under shear loads, Journal of Constructional Steel Research, 149 (2018) 195–206.
[6] Z. Wang, J. Yan, Y. Lin, F. Fan, Y. Yang, Mechanical properties of steel-UHPC-steel slabs under concentrated loads considering composite action, Engineering Structures, 222 (2020) 111095.
[7] M. Xie, N. Foundoukos, J. Chapman, Experimental and numerical investigation on the shear behaviour of friction-welded bar–plate connections embedded in concrete, Journal of Constructional Steel Research, 61(5) (2005) 625–649.
[8] N. Anandavalli, J. Rajasankar, A. Prakash, B. Sivaprasad, Static response of steel-concrete-steel sandwich beam with bi-directionally inclined connectors, American Journal of Civil Engineering and Architecture, 1(1) (2013) 15–20.
[9] Y.-T. Guo, M.-X. Tao, X. Nie, S.-Y. Qiu, L. Tang, J.-S. Fan, Experimental and theoretical studies on the shear resistance of steel–concrete–steel composite structures with bidirectional steel webs, Journal of Structural Engineering, 144(10) (2018) 04018172.
[10] J.-B. Yan, Y.-Y. Yan, T. Wang, Z.-X. Li, Seismic behaviours of SCS sandwich shear walls using J-hook connectors, Thin-Walled Structures, 144 (2019) 106308.
[11] W. Zhang, Z. Huang, Z. Fu, X. Qian, Y. Zhou, L. Sui, Shear resistance behavior of partially composite Steel-Concrete-Steel sandwich beams considering bond-slip effect, Engineering Structures, 210 (2020) 110394.
[12] J.-B. Yan, H. Hu, T. Wang, Flexural behaviours of steel-UHPC-steel sandwich beams with J-hook connectors, Journal of Constructional Steel Research, 169 (2020) 106014.
[13] H. Roshani, M. Yousefi, N. Gharaei-Moghaddam, S.H. Khatibi, Flexural performance of steel-concrete-steel sandwich beams with lightweight fiber-reinforced concrete and corrugated-strip connectors: Experimental tests and numerical modeling, Case Studies in Construction Materials, 18 (2023) e02138.
[14] M. Yousefi, S.H. Khatibi, Experimental and numerical study of the flexural behavior of steel–concrete-steel sandwich beams with corrugated-strip shear connectors, Engineering Structures, 242 (2021) 112559.
[15] M. Yousefi, M. Ghalehnovi, Push-out test on the one end welded corrugated-strip connectors in steel-concrete-steel sandwich structure, Steel Compos. Struct, 24(1) (2017) 23–35.
[16] M. Yousefi, M. Ghalehnovi, Finite element model for interlayer behavior of double skin steel-concrete-steel sandwich structure with corrugated-strip shear connectors, Steel Compos. Struct, 27(1) (2018) 123–133.
[17] M. Daliri, H.G. Arab, M. Miri, S.H. Khatibi, Overlap effects of one-end welded box-profile shear connectors on interlayer shear behavior, in: Structures, Elsevier, 2025, pp. 107982.
[18] S.H. Khatibi, H.G. Arab, M. Miri, The behavior of steel-concrete-steel sandwich composite beams with box-profile shear connectors: Experimental and numerical, in: Structures, Elsevier, 2023, pp. 644–656.
[19] S.H. Khatibi, H.G. Arab, M. Miri, Interlayer behavior investigation of box profile shear connectors in steel-concrete-steel sandwich structures, in: Structures, Elsevier, 2022, pp. 1031–1042.
[20] K.M.A. Sohel, J.R. Liew, C.G. Koh, Numerical modelling of lightweight Steel‐Concrete‐Steel sandwich composite beams subjected to impact, Thin-Walled Structures, 94 (2015) 135–146.
[21] X.-L. Gao, J.-Y. Wang, C. Bian, R.-C. Xiao, B. Ma, Experimental investigation on the behaviour of UHPC-steel composite slabs under hogging moment, Steel and Composite Structures, An International Journal, 42(6) (2022) 765–777.
[22] J.-B. Yan, J.R. Liew, M.-H. Zhang, K. Sohel, Experimental and analytical study on ultimate strength behavior of steel–concrete–steel sandwich composite beam structures, Materials and Structures, 48 (2015) 1523–1544.
[23] Z. Huang, J.R. Liew, Structural behaviour of steel–concrete–steel sandwich composite wall subjected to compression and end moment, Thin-Walled Structures, 98 (2016) 592–606.
[24] C.-H. Li, J.-B. Yan, H.-N. Guan, Finite element analysis on enhanced C-channel connectors in SCS sandwich composite structures, in: Structures, Elsevier, 2021, pp. 818–837.
[25] M. Yousefi, M. Golmohammadi, S.H. Khatibi, M. Yaghoobi, Prediction of the punching load strength of SCS slabs with stud-bolt shear connectors using numerical modeling and GEP algorithm, Journal of Rehabilitation in Civil Engineering, 11(3) (2023) 68–87.
[26] J.-b. Yan, J.R. Liew, K. Sohel, M. Zhang, Push-out tests on J-hook connectors in steel–concrete–steel sandwich structure, Materials and structures, 47 (2014) 1693–1714.
[27] A. Karimipour, M. Ghalehnovi, M. Golmohammadi, J. De Brito, Experimental investigation on the shear behaviour of stud-bolt connectors of steel-concrete-steel fibre-reinforced recycled aggregates sandwich panels, Materials, 14(18) (2021) 5185.
[28] A.S.U.s. Manual, Abaqus 6.11, http://130.149, 89(2080) (2012) v6.
[29] A. Kumar, S. Clement, V. Agrawal, Optimum selection and ranking of electroplating system process parameters: Taguchi-MADM approach, International Journal of Applied Decision Sciences, 4(4) (2011) 341–361.
[30] D. Muñoz, Thesis Discovering unknown equations that describe large data sets using genetic programming techniques, Master's Thesis, Linköping Institute of Technology, 2005.
[31] P. Sarir, J. Chen, P.G. Asteris, D.J. Armaghani, M. Tahir, Developing GEP tree-based, neuro-swarm, and whale optimization models for evaluation of bearing capacity of concrete-filled steel tube columns, Engineering with Computers, 37 (2021) 1–19.
[32] D. Jahed Armaghani, R.S. Faradonbeh, E. Momeni, A. Fahimifar, M. Tahir, Performance prediction of tunnel boring machine through developing a gene expression programming equation, Engineering with Computers, 34 (2018) 129–141.
[33] P. Code, Eurocode 2: design of concrete structures-part 1–1: general rules and rules for buildings, British Standard Institution, London, 668 (2005) 659–668.
[34] A. Specification, Specification for structural steel buildings, ANSI/AISC, 36010 (2005).
[35] L. Aashto, Bridge design specifications, (1998).
[36] H. Kabir, J. Wu, S. Dahal, T. Joo, N. Garg, Automated estimation of cementitious sorptivity via computer vision, Nature Communications, 15(1) (2024) 9935.
[37] Z. Song, S. Zou, W. Zhou, Y. Huang, L. Shao, J. Yuan, X. Gou, W. Jin, Z. Wang, X. Chen, Clinically applicable histopathological diagnosis system for gastric cancer detection using deep learning, Nature Communications, 11(1) (2020) 4294. | ||
|
آمار تعداد مشاهده مقاله: 254 تعداد دریافت فایل اصل مقاله: 239 |
||