
تعداد نشریات | 8 |
تعداد شمارهها | 419 |
تعداد مقالات | 5,511 |
تعداد مشاهده مقاله | 6,209,763 |
تعداد دریافت فایل اصل مقاله | 5,405,266 |
مدلسازی عددی و بررسی اثر تغییرات پارامترهای مختلف در بازدهی و عملکرد حرارتی شمع انرژی | ||
نشریه مهندسی عمران امیرکبیر | ||
مقالات آماده انتشار، پذیرفته شده، انتشار آنلاین از تاریخ 12 تیر 1404 اصل مقاله (3.04 M) | ||
نوع مقاله: مقاله پژوهشی | ||
شناسه دیجیتال (DOI): 10.22060/ceej.2025.22644.8013 | ||
نویسندگان | ||
محمدحسین صبحدم؛ محمدمهدی احمدی* | ||
گروه مهندسی ژئوتکنیک، دانشکده مهندسی عمران، دانشگاه صنعتی شریف، تهران، ایران | ||
چکیده | ||
در سالهای اخیر با رشد صنعت در جوامع مدرن، میزان مصرف انرژی در جهان رو به افزایش بوده است. به همین دلیل دولتها و صاحبان صنایع در راستای تسهیل استفاده از منابع انرژی تجدیدپذیر اقدام به سرمایه گذاری کردهاند. انرژی زمین گرمایی یکی از منابع انرژیهای تجدیدپذیر است که از اقتصادیترین راههای بهرهگیری از این انرژی، استفاده از سیستمهای تبادل حرارت در شمعها است. شمع انرژی با استفاده از سیال تبادل حرارت و لولههای انتقال سیال، در فصلهای گرم سال از دامنه خاکی جهت سرمایش و در فصلهای سرد سال از انرژی گرمایی خاک جهت گرمایش استفاده میکند. پارامترهای زیادی در طراحی شمعانرژیها دخیل هستند. در این پژوهش با استفاده از مدلسازی عددی سه بعدی و به روش المان محدود و با استفاده از نرم افزار COMSOL Multiphysics به بررسی اثر هریک از این پارامترها در عملکرد حرارتی شمع انرژی میپردازیم. سرعت جریان سیال، طول شمع، قطر و ضخامت لوله و فاصله مرکز تا مرکز لولههای انتقال سیال از جمله پارامترهایی هستند که در این پژوهش مورد بررسی قرار گرفتهاند. همچنین با استفاده از روش مطالعه آماری تاگوچی اثر پارامترهای مهم بر توان خروجی شمع انرژی، در کوتاه مدت و بلند مدت، مقایسه و رتبه بندی شدند. نتایج بدست آمده نشان دادند که کاهش سرعت جریان، افزایش طول شمع، کاهش قطر و ضخامت لوله موجب کاهش دمای سیال خروجی از شمع انرژی میشود. به علاوه نحوه قرارگیری لولهها، طول شمع و فاصله مرکز تا مرکز لولهها نسبت به دیگر پارامترها، مهمترین پارامترهای تاثیرگذار بر توان خروجی شمع انرژی هستند. | ||
کلیدواژهها | ||
انرژی زمین گرمایی؛ شمع انرژی؛ عملکرد حرارتی؛ مدلسازی عددی؛ روش تاگوچی | ||
موضوعات | ||
روش های عددی؛ ژئو تکنیک زیست محیطی | ||
عنوان مقاله [English] | ||
Numerical modeling and analysis of the effect of different parameters on the efficiency and thermal performance of energy piles | ||
نویسندگان [English] | ||
Mohammad Hosain Sobhdam؛ Mohammad Mahdi Ahmadi | ||
Department of Geotechnical engineering, Civil engineering faculty, Sharif university of technology, Tehran, Iran | ||
چکیده [English] | ||
In recent years, with the growth of industrial societies, the amount of energy consumption in the world has been increasing. On the other hand, the most consumed energy sources in the world are non-renewable energy sources. For this reason, governments and industries have invested to facilitate and make renewable energy sources cheaper. One of these renewable energies is geothermal energy, which is one of the most economical ways to use this energy, using heat exchange systems in piles and foundations. Various construction methods have been used to implement energy piles and many parameters are involved in their design. In this research, the effect of each of these parameters on the thermal performance of the energy pile is investigated using 3D numerical modeling and using the finite element method with COMSOL. Flow rate, pile length, pipe diameter and thickness and center-to-center distance of pipes are the parameters that have been investigated in this research. Also, by using the Taguchi method, the effect of important parameters on the output power of the energy pile, in the short and long term, were compared and ranked. The obtained results have shown that reducing the flow rate, increasing the length of the pile, reducing the diameter and thickness of the pipe improves the thermal performance of the energy pile. In addition, pipe configuration, pile length and the distance from the center to the center of the pipes compared to other parameters, are the most important parameters affecting the output power of the energy pile. | ||
کلیدواژهها [English] | ||
Geothermal energy, Energy pile, Thermal performance, Numerical modeling, Taguchi method | ||
سایر فایل های مرتبط با مقاله
|
||
مراجع | ||
| ||
آمار تعداد مشاهده مقاله: 6 تعداد دریافت فایل اصل مقاله: 4 |