پیوندهای مفید
آمار
| تعداد نشریات | 9 |
| تعداد شمارهها | 447 |
| تعداد مقالات | 5,734 |
| تعداد مشاهده مقاله | 8,047,193 |
| تعداد دریافت فایل اصل مقاله | 6,547,389 |
Enhancing Thermo-Electrical Performance of Solid Oxide Fuel Cells through Multi-Channel Cooling System Analysis | ||
| AUT Journal of Mechanical Engineering | ||
| مقاله 4، دوره 10، شماره 2، تیر 2026، صفحه 179-198 اصل مقاله (2.72 M) | ||
| نوع مقاله: Research Article | ||
| شناسه دیجیتال (DOI): 10.22060/ajme.2025.23880.6164 | ||
| نویسندگان | ||
| Mohammad Taghilou* ؛ Vahid Barati | ||
| Department of Mechanical Engineering, Faculty of Engineering, University of Zanjan, Zanjan, Iran | ||
| چکیده | ||
| Thermal stresses in solid oxide fuel cells, caused by differential expansion during thermal cycling and coefficient of thermal expansion mismatches, lead to material degradation, cracking, voltage instability, and reduced reliability, hindering commercial viability. This study introduces a novel six-channel active cooling system for solid oxide fuel cells, aimed at lowering peak temperatures, improving thermal uniformity, and stabilizing voltage output. Using 3D numerical simulations with hydrogen/water vapor and oxygen/nitrogen as reactants, it systematically examines how cooling parameters such as flow rate, temperature, and flow configuration affect electrochemical performance. Key results demonstrate that co-current cooling (600 K, 1×10⁻⁶ kg/s) reduces peak temperature by 9% (to 1387 K) but at the cost of a 133% increase in temperature non-uniformity and a 55% voltage drop due to elevated overpotentials. Conversely, counter-current cooling (1000 K, same flow rate) achieves a more balanced performance, lowering peak temperature by 6% (to 1389.11 K) while reducing non-uniformity by 21.5% and increasing output voltage by 5.5% (0.2933 V). A critical finding is that excessive cooling (1×10⁻⁵ kg/s) leads to premature voltage collapse, with co-current flows failing at lower current densities (e.g., 9800 A/m² at 600 K) compared to counter-current configurations. This study pioneers an active cooling optimization framework for solid oxide fuel cells, demonstrating how precisely adjusted cooling parameters balance thermal control with electrochemical efficiency. | ||
| کلیدواژهها | ||
| Solid oxide fuel cell؛ Cooling channels؛ Numerical thermal management؛ Uniform temperature distribution؛ Maximum temperature | ||
|
آمار تعداد مشاهده مقاله: 541 تعداد دریافت فایل اصل مقاله: 245 |
||