بررسی ایجاد جدایش بین‌لایه‌ای و پیش‌بینی منحنی رشد آن در چندلایه‌های کامپوزیتی شیشه/اپوکسی با روش آکوستیک امیشن

 [1] Fotouhi M., Heidari H., Pashmforoush F., Ahmadi M., 2012. “Composite materials damage characterization under quasi-static 3-point bending test using fuzzy c-means clustering”. Applied Mechanics and Materials,  110-116, pp. 1221-1228.

[2] Hajikhani M., Soltannia B., Refahi Oskouei A., Ahmadi Najafabadi M., 2009. “ Monitoring of delamination in laminated composites using acoustic emission”,  4th Conference of Condition Monitoring & Fault Detection, Tehran, Iran (In Persian).  [3] Amenabar I., Mendikute A., López-Arraiza A.,

Lizaranzu M., Aurrekoetxea J., 2011. “Comparison and analysis of non-destructive testing techniques suitable for delamination inspection in wind turbine blades”,  Composites Part B: Engineering, 42, No. 5, pp. 1298- 1305.

[4] Yousefi J., Ahmadi Najafabadi M., Nazmdar M.,  Hajikhani M., 2011. “Investigation of damage

mechanisms in glass/epoxy composites using acoustic emission method”, 1st Conference of Iranian Aircraft Structural Integrity Program, Tehran, Iran (In Persian).

[5] Nazmdar Shahri M., Yousefi J., Hajikhani M., Ahmadi Najafabadi M., 2010. “ Determination of delamination in composite materials under mode I loading using acoustic emission”, 11th Iranian Conference on Manufacturing Engineering, Tabriz, Iran (In Persian).

[6] Benzeggagh M.L., Kenane M., 1996. ”Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixedmode bending apparatus”, Composites Science and

Technology, 56, No. 4, pp. 439-449.

[7] Refahi Oskouei A., Ahmadi M., 2010. “Acoustic emission characteristics of mode I delamination in

glass/polyester composites”. Journal of Composite Materials, 44, No. 7, pp. 793-807.

 [8] Silversides I., Maslouhi A., LaPlante G., 2013.  “Interlaminar fracture characterization in composite

materials by using acoustic emission”. 5th International Symposium on NDT in Aerospace, Singapore.

[9] Fotouhi M., Heidary H., Ahmadi M., Pashmforoush F.,  2012. “Characterization of composite materials damage under quasi-static three-point bending test using wavelet and fuzzy C-means clustering”, Journal of Composite Materials, 46, No. 15, pp. 1795-1808.

[10] Pashmforoush F., Fotouhi M., Ahmadi M., 2012.  “Damage characterization of glass/epoxy composite

under three-point bending Test using acoustic emission technique”, Journal of Materials Engineering and

Performance, 21, Issue 7, pp. 1380-1390.

[11] Romhany G., Szebényi G., 2012. “Interlaminar fatigue crack growth behavior of MWCNT/carbon

fiber reinforced hybrid composites monitored via newly developed acoustic emission method”, Express

Polymer Letters, 6, No. 7, pp. 572-580.

[12] ASTM D5528-01, 2003. “Standard Test Method for Mode I Interlaminar Fracture Toughness

of Unidirectional Fiber-Reinforced Polymer Matrix Composites”, ASTM International, West Conshohocken, PA.

[13] Sih G. C., 1991. “Mechanics of Fracture Initiation and Propagation”, Springer.

[14] Cesari F., Dal Re V., Minak G., Zucchelli A., 2007.  “Damage and residual strength of laminated carbon– epoxy composite circular plates loaded at the centre”,  Composites: Part A, 38, pp. 1163–1173.

[15] Anderson T.L., 2005. “Fracture Mechanics;  fundamentals and applications”, 4th Edition, Taylor &

Francis, pp. 27

[16] McCrory J. P., Al-Jumaili S. K., Crivelli D., Pearson M. R., Eaton M. J., Featherston C. A., Guagliano M.,

Holford K. M., Pullin R., 2015. “Damage Classification in Carbon Fibre Composites Using Acoustic Emission:  A Comparison of Three Techniques”, Composites: Part

B, 68, pp. 424–430.

[17] Ziehl P.H., 2000. “Development of a damage based design criterion for fiber reinforced vessels”, Ph.D Thesis, The University of Texas at Austin.

[18] Bohse J., 2000. “Acoustic Emission Characteristics of Micro-failure Processes in Polymer Blends and

Composites”, Composites Science and Technology, 60,  Issue 8, pp. 1213-1226.

[19] Groot P.J., Wijnen A. M., Janssen R. B. F., 1995. “Realtime frequency determination of acoustic emission for different fracture mechanisms in carbon/epoxy composites”, Composites Science and Technology, 55,  pp. 405-412.

[20] Arumugam V., Suresh Kumar C., Santulli C., Sarasini F., Stanley A. J., 2011. “A Global Method for the Identification of Failure Modes in Fiberglass Using Acoustic Emission” Journal of Testing and Evaluation,  39, Issue 5, pp. 1-13.

[21] Talreja R., Singh C.V., 2012. “Damage and Failure of Composite Materials”, Cambridge University Press,  pp. 248-255.

[22] Talreja R., 1990. “Internal variable damage mechanics of composite materials”. In “Yielding, Damage, and Failure of Anisotropic Solids”, editor: Boehler J.P.,  London: Mechanical Engineering Publications, pp.

509–533.