Determining a Suitable Location for Wind Turbines Using Inverse Solution and Mast Data in a Mountainous Terrain

[1] K. Kaygusuz, Wind energy: progress and potential, Energy sources, 26(2) (2004) 95-105.

[2] M. Ritter, L. Deckert, Site assessment, turbine selection, and local feed-in tariffs through the wind energy index, Applied Energy, 185 (2017) 1087-1099.

[3] P. Mittal, K. Mitra, Decomposition based multi-objective optimization to simultaneously determine the number and the optimum locations of wind turbines in a wind farm, IFAC-PapersOnLine, 50(1) (2017) 159-164.

[4] T. Burton, N. Jenkins, D. Sharpe, E. Bossanyi, Wind energy handbook, John Wiley & Sons, 2011.

[5] H. Cetinay, F.A. Kuipers, A.N. Guven, Optimal siting and sizing of wind farms, Renewable Energy, 101 (2017) 51-58.

[6] S. Yan, S. Shi, X. Chen, X. Wang, L. Mao, X. Liu, Numerical simulations of flow interactions between steep hill terrain and large scale wind turbine, Energy, (2018).

[7] C.J. Desmond, S.J. Watson, P.E. Hancock, Modelling the wind energy resource in complex terrain and atmospheres. Numerical simulation and wind tunnel investigation of non-neutral forest canopy flow, Journal of Wind Engineering and Industrial Aerodynamics, 166 (2017) 48-60.

[8] A. Russell, Computational fluid dynamics modeling of atmospheric flow applied to wind energy research, (2009).

[9] H. Ertürk, O.A. Ezekoye, J.R. Howell, Boundary condition design to heat a moving object at uniform transient temperature using inverse formulation, Journal of manufacturing science and engineering, 126(3) (2004) 619-626.

[10] R. Mehdipour, A. Ashrafizadeh, K. Daun, C. Aghanajafi, Dynamic optimization of a radiation paint cure oven using the nominal cure point criterion, Drying Technology, 28(12) (2010) 1405-1415.

[11] R. Mehdipour, C. Aghanajafi, A. Ashrafizadeh, Optimal design of radiation paint cure ovens using a novel objective function, Pigment & Resin Technology, 41(4) (2012) 240-250.

[12] M.A. Mahmoud, A.E. Ben-Nakhi, Neural networks analysis of free laminar convection heat transfer in a partitioned enclosure, Communications in Nonlinear Science and Numerical Simulation, 12(7) (2007) 1265-1276.

[13] H. Ertürk, O.A. Ezekoye, J.R. Howell, The Use of Inverse Formulation in Design and Control of Transient Radiant Systems, in: Proceedings of International Heat Transfer Conference, Grenoble, France, 2002.

[14] F.H. França, O.A. Ezekoye, J.R. Howell, Inverse boundary design combining radiation and convection heat transfer, Journal of heat transfer, 123(5) (2001) 884-891.

[15] J. Xiao, J. Li, Q. Xu, Y. Huang, H.H. Lou, ACS–based dynamic optimization for curing of polymeric coating, AIChE journal, 52(4) (2006) 1410-1422.

[16] A. Ashrafizadeh, R. Mehdipour, C. Aghanajafi, A hybrid optimization algorithm for the thermal design of radiant paint cure ovens, Applied Thermal Engineering, 40 (2012) 56-63.

[17] H.G. Kim, C.M. Lee, H.C. Lim, N.H. Kyong, An experimental and numerical study on the flow over two-dimensional hills, Journal of Wind Engineering and Industrial Aerodynamics, 66(1) (1997) 17-33.

[18] H.G. Kim, V. Patel, C.M. Lee, Numerical simulation of wind flow over hilly terrain, Journal of wind engineering and industrial aerodynamics, 87(1) (2000) 45-60.

[19] D. Fallo, Wind energy resource evaluation in a site of central Italy by CFD simulations, UNIVERSITÀ DEGLI STUDI DI CAGLIARI. Cagliari, Italia, (2007).

[20] P. Fang, M. Gu, J. Tan, B. Zhao, D. Shao, Modeling the neutral atmospheric boundary layer based on the standard k-ε turbulent model: modified wall function, Wind Engineering, (2009).

[21] S. Cao, T. Wang, Y. Ge, Y. Tamura, Numerical study on turbulent boundary layers over two-dimensional hills—effects of surface roughness and slope, Journal of wind engineering and industrial aerodynamics, 104 (2012) 342-349.

[22] Z. Liu, T. Ishihara, T. Tanaka, X. He, LES study of turbulent flow fields over a smooth 3-D hill and a smooth 2-D ridge, Journal of Wind Engineering and Industrial Aerodynamics, 153 (2016) 1-12.

[23] G. Mosetti, C. Poloni, B. Diviacco, Optimization of wind turbine positioning in large windfarms by means of a genetic algorithm, Journal of Wind Engineering and Industrial Aerodynamics, 51(1) (1994) 105-116.

[24] S. Grady, M. Hussaini, M.M. Abdullah, Placement of wind turbines using genetic algorithms, Renewable energy, 30(2) (2005) 259-270.

[25] A. Emami, P. Noghreh, New approach on optimization in placement of wind turbines within wind farm by genetic algorithms, Renewable Energy, 35(7) (2010) 1559-1564.

[26] C. Wan, J. Wang, G. Yang, X. Li, X. Zhang, Optimal micro-siting of wind turbines by genetic algorithms based on improved wind and turbine models, in: Decision and Control, 2009 held jointly with the 2009 28th Chinese Control Conference. CDC/CCC 2009. Proceedings of the 48th IEEE Conference on, IEEE, 2009, pp. 5092-5096.

[27] E. EU-FP, Wind loads on solar energy roofs, Heron, 52(3) (2007) 201.

[28] Z. Baniamerian, R. Mehdipour, Studying Effects of Fence and Sheltering on the Aerodynamic Forces Experienced by Parabolic Trough Solar Collectors, Journal of Fluids Engineering, 139(3) (2017) 031103.

[29] J.A. Peterka, Z. Tan, B. Bienkiewicz, J. Cermak, Wind loads on heliostats and parabolic dish collectors: Final subcontractor report, Solar Energy Research Inst., Golden, CO (USA), 1988.

[30] A. Ashrafizadeh, G.D. Raithby, G. Stubley, Direct design of shape, Numerical Heat Transfer: Part B: Fundamentals, 41(6) (2002) 501-520.

[31] K. Daun, H. Erturk, J.R. Howell, Inverse design methods for high-temperature systems, Arabian Journal for Science and Engineering, 27(2) (2002) 3-48.

[32] M. Zanganeh, V. Khalajzadeh, Validation of the WAsP model for a terrain surrounded by mountainous region, in: Proceedings of World Academy of Science, Engineering and Technology, 2011, pp. 379-383.