بررسی اثر نانوذرات تیتانیوم اکسی دی فلوئوراید (TiOF2) بر روی رفتار شیارشدگی مخلوط‏های آسفالتی

[1]    M. Phillips, C. Robertus, Binder rheology and asphaltic pavement permanent deformation; the zero-shear-viscosity, in:  EURASPHALT & EUROBITUME CONGRESS, STRASBOURG, 7-10 MAY 1996. VOLUME 3. PAPER E&E. 5.134, 1996.

[2]    A.D. Barros, L.C.d.F.L. Lucena, D.B. Costa, Rheological properties of hydroxide and calcium oxide nanoparticles in asphalt binder, Petroleum Science and Technology, 35(7) (2017) 738-745.

[3]    N. Morian, E.Y. Hajj, C.J. Glover, P.E. Sebaaly, Oxidative aging of asphalt binders in hot-mix asphalt mixtures, Transportation research record, 2207(1) (2011) 107-116.

[4]    H. Jan, M.Y. Aman, M. Tawab, K. Ali, B. Ali, Performance Evaluation of Hot Mix Asphalt Concrete by Using Polymeric Waste Polyethylene, in: Modeling, Simulation, and Optimization, Springer, 2018, pp. 91-99.

[5]    M. Arabani, S.A. Tahami, Assessment of mechanical properties of rice husk ash modified asphalt mixture, Construction and Building Materials, 149 (2017) 350-358.

[6]    S.C. Somé, A. Pavoine, E. Chailleux, Evaluation of the potential use of waste sunflower and rapeseed oils-modified natural bitumen as binders for asphalt pavement design, International Journal of Pavement Research and Technology, 9(5) (2016) 368.

[7]    J. Teizer, M. Venugopal, W. Teizer, J. Felkl, Nanotechnology and its impact on construction: bridging the gap between researchers and industry professionals, Journal of Construction Engineering and management, 138(5) (2012) 594-604.

[8]    A. Ameli, R. Babagoli, M. Khabooshani, R. AliAsgari, F. Jalali, Permanent deformation performance of binders and stone mastic asphalt mixtures modified by SBS/montmorillonite nanocomposite, Construction and Building Materials, 239 (2020) 117700

[9]    F. Xiao, A.N. Amirkhanian, S.N. Amirkhanian, Influence of carbon nanoparticles on the rheological characteristics of short-term aged asphalt binders, Journal of Materials in Civil Engineering, 23(4)(2011) 423-431

[10] I. Amin, S.M. El-Badawy, T. Breakah, M.H. Ibrahim, Laboratory evaluation of asphalt binder modified with carbon nanotubes for Egyptian climate, Construction and Building Materials, 121 (2016) 361-372

[11] H. Zhang, C. Zhu, D. Kuang, Physical, rheological, and aging properties of bitumen containing organic expanded vermiculite and nano-zinc oxide, Journal of Materials in Civil Engineering, 28(5) (2016) 04015203

[12] N.I.M. Yusoff, A.A.S. Breem, H.N. Alattug, A. Hamim, J. Ahmad, The effects of moisture susceptibility and ageing conditions on nano-silica/ polymer-modified asphalt mixtures, Construction and Building Materials, 72 (2014) 139-147.

[13] J. Yu, X. Zeng, S. Wu, L. Wang, G. Liu, Preparation and properties of montmorillonite modified asphalts, Materials Science and Engineering: A, 447(1-2) (2007) 233-238.

[14] A.N. Amirkhanian, F. Xiao, S.N. Amirkhanian, Characterization of unaged asphalt binder modified with carbon nano particles, International Journal of Pavement Research and Technology, 4(5) (2011) 281

[15] M. Faramarzi, M. Arabani, A. Haghi, V. Mottaghitalab, Carbon Nanotubes-modified Asphalt Binder: Preparation and Characterization, International Journal of Pavement Research & Technology, 8(1) (2015).

[16] H. Yao, Z. You, L. Li, C.H. Lee, D. Wingard, Y.K. Yap, X. Shi, S. Goh, Properties and chemical bonding of asphalt and asphalt mixtures modified with nanosilica, J. Mater. Civ. Eng, 25 (2012) 1619-1630.

[17] F. Moghadas Nejad, R. Tanzadeh, J. Tanzadeh, G.H. Hamedi, Investigating the effect of nanoparticles on the rutting behaviour of hot-mix asphalt, International Journal of Pavement Engineering, 17(4) (2016) 353-362

[18] G. Shafabakhsh, S. Mirabdolazimi, M. Sadeghnejad, Evaluation the effect of nano-TiO2 on the rutting and fatigue behavior of asphalt mixtures, Construction and building materials, 54 (2014) 566-571.

[19] M. Chen, Y. Liu, NOx removal from vehicle emissions by functionality surface of asphalt road, Journal of Hazardous Materials, 174(1-3) (2010) 375-379.

[20] M. Arabani, F. Moghadas Nejad, A. Azarhoosh, Laboratory evaluation of recycled waste concrete into asphalt mixtures, International Journal of Pavement Engineering, 14(6) (2013) 531-539.

[21] M. Chen, F. Xiao, B. Putman, B. Leng, S. Wu, High temperature properties of rejuvenating recovered binder with rejuvenator, waste cooking and cotton seed oils, Construction and Building Materials, 59 (2014) 10-16

[22] N.A. Hassan, G.D. Airey, N.I.M. Yusoff, M.R. Hainin, R. Putrajaya, M.E. Abdullah, M.M.A. Aziz, Microstructural characterisation of dry mixed rubberised asphalt mixtures, Construction and Building Materials, 82 (2015) 173-183

[23] H. Ziari, H. Farahani, A. Goli, S. Sadeghpour Galooyak, The investigation of the impact of carbon nano tube on bitumen and HMA performance, Petroleum Science and Technology, 32(17) (2014) 2102-2108.

[24] J. Shen, S. Amirkhanian, F. Xiao, B. Tang, Influence of surface area and size of crumb rubber on high temperature properties of crumb rubber modified binders, Construction and Building Materials, 23(1) (2009) 304-310

[25] D. Valtorta, L. Poulikakos, M. Partl, E. Mazza, Rheological properties of polymer modified bitumen from long-term field tests, Fuel, 86(7-8) (2007) 938-948.

[26] S.-p. Wu, L. Pang, L.-t. Mo, Y.-c. Chen, G.-j. Zhu, Influence of aging on the evolution of structure, morphology and rheology of base and SBS modified bitumen, Construction and Building Materials, 23(2) (2009) 1005-1010.

[27] P. Interactive, Superpave Performance Grading, Julkaistu, 8 (2008) 2008.