پیوندهای مفید
آمار
| تعداد نشریات | 7 |
| تعداد شماره‌ها | 406 |
| تعداد مقالات | 5,432 |
| تعداد مشاهده مقاله | 5,615,352 |
| تعداد دریافت فایل اصل مقاله | 5,051,712 |
بررسی کارآیی حذف و سینتیک جذب کادمیوم از محیط آبی توسط ذرات نانو گرافن تیول دار شده | ||
| نشریه مهندسی عمران امیرکبیر | ||
| مقاله 17، دوره 52، شماره 1، فروردین 1399، صفحه 275-286 اصل مقاله (1.67 M) | ||
| نوع مقاله: مقاله پژوهشی | ||
| شناسه دیجیتال (DOI): 10.22060/ceej.2018.14660.5710 | ||
| نویسندگان | ||
| اسماعیل محمدنیا1؛ مجتبی هادوی فر* 2؛ حجت ویسی3 | ||
| 1گروه محیط زیست، دانشکده جغرافیا و علوم محیطی، دانشگاه حیکم سبزواری، سبزوار، ایران | ||
| 2استادیار، دانشکده جغرافیا و علوم محیطی، دانشگاه حکیم سبزواری، سبزوار، ایران | ||
| 3دانشیار، گروه شیمی، دانشگاه پیام نور، صندوق پستی 4697-19395، تهران، ایران | ||
| چکیده | ||
| کادمیوم یک فلز بسیار سمی می‌باشد که حتی در غلظت‌های پایین نیز اثرات سویی بر سلامتی انسان‌ها داشته و باید از محیط‌های آبی حذف گردد. ترکیبات حاوی کادمیوم می‌توانند سبب بروز انواع سرطان‌ها، بروز ناراحتی های تنفسی و مزمن ریوی، سبب بروز بیماری ایتای-ایتای، تخریب بافت بیضه‌ها و ساختار ویژه کلیه‌ها شود. پژوهش حاضر با هدف بررسی حذف یون کادمیوم از محلول‌های آبی توسط نانوذرات اکسیدگرافن تیول‌دار شده در سیستم جریان ناپیوسته صورت گرفت. در این مطالعه، متغیرهاى آزمایش شامل pH ،دوز جاذب و غلطت اولیه کادمیوم، مورد بررسی قرار گرفت. برای تعیین ویژگی‌های جاذب آزمون‌های SEM و IR-FT استفاده شد. نتایج نشان داد با افزایش غلظت اولیه کادمیوم میزان جذب کاهش و با افزایش دوز جاذب و pH درصد حذف کادمیوم افزایش پیدا می‌کند. مقایسه مدل‌های ایزوترم R2 و سینتیک جذب نشان داد که مدل ایزو ترم لانگ مویر و مدل سینتیکی شبه مرتبه دوم به ترتیب با داشتن مقادیر برابر0/97 و 0/99 نسبت به سایر مدل‌ها از برازش بهتر و شرح بهتری از داده‌های جذب برخوردار بودند. با توجه به نتایج حاصل از این تحقیق و به عنوان نتیجه گیری کلی می‌توان گفت که جاذب سنتز شده از توانایی بالایی برای حذف کادمیوم برخوردار است. | ||
| کلیدواژه‌ها | ||
| اکسید گرافن؛ کادمیوم؛ گروه عاملی تیول؛ مدل‌های هم دما؛ سینتیک جذب | ||
| موضوعات | ||
| آلودگی آب ، فاضلاب | ||
| عنوان مقاله [English] | ||
| Adsorption of Cadmium (II) onto Thiolated Graphene Oxide and Kinetic Investigations | ||
| نویسندگان [English] | ||
| Esmaeil Mohammadnia1؛ mojtaba hadavifar2؛ Hojat Veisi3 | ||
| 1Department of environment, Hakim Sabzevari University, Sabzevar, Iran | ||
| 2Department of environment sciences, Hakim Sabzevari University, Sabzevar, Iran | ||
| 3Department of Chemistry, Payame Noor University (PNU), Kermanshah, Iran | ||
| چکیده [English] | ||
| Cadmium is a very toxic metal that has adverse effects on human health and aquatic environments even at low concentrations. Therefore, efforts should be made to eliminate this metal from aquatic ecosystems. This study was carried out in order to remove cadmium ions from synthetic aqueous solutions by thiolated graphene oxide in a batch system. In this study, the effect of experimental parameters such as pH, adsorbent dosage and initial cadmium concentration was investigated. To characterize the adsorbent properties, SEM and FT-IR analyses were utilized. The results showed that with the increasing initial concentration of cadmium, the amount of adsorption decreased and increasing the dose of adsorbent and pH increased the percentage of cadmium removal. Comparison of isotherm and kinetic adsorption models showed that Langmuir and Pseudo-second order models, with R2 values of 0.97 and 0.99, respectively, had a better fitting and give a good description of adsorption data than other models. Therefore, as a general conclusion, it can be said that the synthesized adsorbent had a high capability to remove cadmium from aqueous solutions. | ||
| کلیدواژه‌ها [English] | ||
| Geraphene oxide, Cadmium, Thiol functional group, Isotherm models, Adsorption kinetics | ||
| مراجع | ||
|
[1] M. Karbarz, A.M. Khalil, K. Wolowicz, K. Kaniewska, J. Romanski, Z. Stojek, Efficient removal of cadmium and lead ions from water by hydrogels modified with cystine, Journal of Environmental Chemical Engineering. 6 (2018) 3962–3970. [2] F.Y. Wang, H. Wang, J.W. Ma, Adsorption of cadmium (II) ions from aqueous solution by a new low-cost adsorbent—Bamboo charcoal, Journal of hazardous materials. 177 (2010) 300–306. [3] R.A.K. Rao, M. Kashifuddin, Adsorption studies of Cd (II) on ball clay: Comparison with other natural clays, .Arabian Journal of Chemistry. 9 (2016) 1233– 1241. [4] N. Balkaya, H. Cesur, Adsorption of cadmium from aqueous solution by phosphogypsum, Journal of Environmental Chemical Engineering. 140 (2008) 247–254. [5] M. Iqbal, A. Saeed, S.I. Zafar, Hybrid biosorbent: an innovative matrix to enhance the biosorption of Cd (II) from aqueous solution, Journal of hazardous materials. 148 (2007) 47–55. [6] Ihsanullah, A. Abbas, A.M. Al-Amer, T. Laoui, M.J. Al-Marri, M.S. Nasser, M. Khraisheh, M.A. Atieh, Heavy metal removal from aqueous solution by advanced carbon nanotubes: Critical review of adsorption applications, Separation and Purification Technology. 157 (2016) 141–161. [7] H. Qiu, L. Lv, B. Pan, Q. Zhang, W. Zhang, Q. Zhang, Critical review in adsorption kinetic models, Journal of Zhejiang University Science A. 10 (2009) 716–724. [8] V.K. Gupta, S. Agarwal, T.A. Saleh, Chromium removal by combining the magnetic properties of iron oxide with adsorption properties of carbon nanotubes, Water Research. 45 (2011) 2207–2212. [9] T. Liu, Z.-L. Wang, L. Zhao, X. Yang, Enhanced chitosan/Fe 0-nanoparticles beads for hexavalent chromium removal from wastewater, journal Chemical engineering. 189 (2012) 196–202. [10] Afkhami, T. Madrakian, A. Amini, Z. Karimi, Effect of the impregnation of carbon cloth with ethylenediaminetetraacetic acid on its adsorption capacity for the adsorption of several metal ions, Journal of hazardous materials. 150 (2008) 408–412. [11] S. h Sheshmani, F.M. Arab, R. Amini, Iron (III) Hydroxide/ Graphene oxide nano composite and investigation of lead adsorption, Jornal of applied researches in Chemistry. 6 (2013) 17–23. [12] M. Hadavifar, N. Bahramifar, H. Younesi, Q. Li, Adsorption of mercury ions from synthetic and real wastewater aqueous solution by functionalized multi-walled carbon nanotube with both amino and thiolated groups, journal Chemical engineering. 237 (2014) 217–228. [13] Y. Yang, J. Shao, Synthesis of sulfhydryl chitin and its adsorption properties for heavy metal ions, Journal of Applied Polymer Science. 77 (2000) 151–155. [14] B.C. Chen, Q. Yang, Y. Yang, W. Lv, Y. Wen, P. Hou, M. Wang, H. Cheng, Self-Assembled Free-Standing Graphite Oxide Membrane, advanced materials. 21 (2009) 3007–3011. [15] H. Khan, M.J. Ahmed, M.I. Bhanger, A simple spectrophotometric determination of trace level mercury using 1, 5-diphenylthiocarbazone solubilized in micelle, Analytical Sciences. 21 (2005) 507–512. [16] I. Langmuir, The adsorption of gases on plane surfaces of glass, mica and platinum., Journal of the American Chemical society. 40 (1918) 1361–1403. [17] Y. Sağ, Y. Aktay, Application of equilibrium and mass transfer models to dynamic removal of Cr (VI) ions by chitin in packed column reactor, Process Biochemistry. 36 (2001) 1187–1197. [18] D. Balarak, F.K. Mostafapour, H. Azarpira, A. Joghataei, Langmuir, Freundlich, Temkin and Dubinin–radushkevich isotherms studies of equilibrium sorption of ampicilin unto montmorillonite nanoparticles, Journal of Pharmaceutical Research International. 20 (2017) 1–9. [19] D. Robati, Pseudo-second-order kinetic equations for modeling adsorption systems for removal of lead ions using multi-walled carbon nanotube, Journal of Nanostructure in Chemistry. 3 (2013) 55. [20] D.L. Pavia, G.M. Lampman, G.S. Kriz, J.A. Vyvyan, Introduction to spectroscopy, Brooks Cole, 2008. [21] L. Ai, H. Huang, Z. Chen, X. Wei, J. Jiang, Activated carbon/CoFe2 O4 composites: facile synthesis, magnetic performance and their potential application for the removal of malachite green from water, Journal Chemical Engineering. 156 (2010) 243–249. [22] G. Zhang, J. Qu, H. Liu, A.T. Cooper, R. Wu, CuFe2 O4/activated carbon composite: a novel magnetic adsorbent for the removal of acid orange II and catalytic regeneration, Chemosphere. 68 (2007) 1058–1066. [23] N. Yang, S. Zhu, D. Zhang, S. Xu, Synthesis and properties of magnetic Fe3 O4-activated carbon nanocomposite particles for dye removal, Materials Letters. 62 (2008) 645–647. [24] S. Chen, Q. Yue, B. Gao, X. Xu, Equilibrium and kinetic adsorption study of the adsorptive removal of Cr (VI) using modified wheat residue, Journal of Colloid and Interface Science. 349 (2010) 256–264. [25] J. Hizal, R. Apak, Modeling of copper (II) and lead (II) adsorption on kaolinite-based clay minerals individually and in the presence of humic acid, Journal of colloid and interface science. 295 (2006) 1–13. [26] C. He-Ying, L. Zhao-Xia, Q. Guo-Li, K. De-Guo, W. Si-Xin, L. Yun-Cai, D. Zu-Liang, First-principles study of structures and electronic properties of cadmium sulfide clusters, Chinese Physics B. 17 (2008) 2478. [27] ] J. Lu, Y. Li, X. Yan, B. Shi, D. Wang, H. Tang, Sorption of atrazine onto humic acids (HAs) coated nanoparticles, Colloids Surfaces A Physicochem. Journal of hazardous materials. 347 (2009) 90–96. [28] K.L. Chen, M. Elimelech, Interaction of fullerene (C60) nanoparticles with humic acid and alginate coated silica surfaces: measurements, mechanisms, and environmental implications, Environmental science & technology. Technol. 42 (2008) 7607– 7614. [29] G. Bhanjana, N. Dilbaghi, K.-H. Kim, S. Kumar, Carbon nanotubes as sorbent material for removal of cadmium, Journal of Molecular Liquids. 242 (2017) 966–970. [30] P. Tan, J. Sun, Y. Hu, Z. Fang, Q. Bi, Y. Chen, J. Cheng, Adsorption of Cu2+, Cd2+ and Ni2+ from aqueous single metal solutions on graphene oxide membranes, Journal of hazardous materials. 297 (2015) 251–260. [31] Y.-S. Ho, G. McKay, Pseudo-second order model for sorption processes, Process biochemistry. 34 (1999) 451–465. [32] S. Lagergren, Zur theorie der sogenannten adsorption geloster stoffe, Kungliga svenska vetenskapsakademiens. Vetenskapsakademiens. Handl. 24 (1898) 1–39. [33] V.C. Srivastava, I.D. Mall, I.M. Mishra, Removal of cadmium (II) and zinc (II) metal ions from binary aqueous solution by rice husk ash, Colloids and surfaces A: physicochemical and engineering aspects.Asp. 312 (2008) 172–184. | ||
|
آمار تعداد مشاهده مقاله: 723 تعداد دریافت فایل اصل مقاله: 862 |
||