پیوندهای مفید
آمار
| تعداد نشریات | 7 |
| تعداد شماره‌ها | 399 |
| تعداد مقالات | 5,389 |
| تعداد مشاهده مقاله | 5,288,031 |
| تعداد دریافت فایل اصل مقاله | 4,882,772 |
Theoretical Assessment of the Behavior of a Cable Bracing System with a Central Steel Plate | ||
| AUT Journal of Civil Engineering | ||
| مقاله 4، دوره 3، شماره 1، شهریور 2019، صفحه 37-48 اصل مقاله (945.3 K) | ||
| نوع مقاله: Research Article | ||
| شناسه دیجیتال (DOI): 10.22060/ajce.2018.15249.5527 | ||
| نویسندگان | ||
| S. Abhari* ؛ M. Barghian | ||
| Department of Civil Engineering, Tabriz University, Tabriz, Iran | ||
| چکیده | ||
| The large displacements and lack of sufficient lateral stiffness are the main problems of moment resisting frames (MRFs). In this research a system of four cable bracings connected to a square steel plate located in the center of them has been studied to solve MRF’s mentioned problems. The theoretical behavior of the system was derived under a lateral static load. The purpose of this study is to demonstrate the efficiency of the system, in which all cables have tensile forces under the lateral load and cables are not slackened. The cables diameter and plate dimensions were investigated. It was observed that the variation of cable diameter had a significant effect on the frame lateral displacement; while the variation of dimensions of the plate did not have much effect on the obtained values. The results showed that the proposed system had the same characteristics of the MRF for its appropriate ductility, at the same time it had its high stiffness. Adding a steel plate in the center of bracings causes all cables to involve against the lateral load and all cables remain in tension. Therefore, using the central steel plate improves the performance of the structure against the applied lateral load. | ||
| کلیدواژه‌ها | ||
| Cable؛ Plate؛ Bracing؛ Retrofit؛ Assessment | ||
| مراجع | ||
|
[1] S. Sorace, G. Terenzi, An advanced seismic protection technology: The damped cable system, Advances in structures, (2003) 1185-1191. [2] S. Maghsoudpour, M. Barghian, Concrete structure rehabilitation using cable systems and optimization of the cable system form and pre-tensioning force range, Sharif Journal of Civil Engineering, 24(44) (2007) 117-124.
[3] M.K. Majd, The investigation of using cable as a bracing system in steel structures, Tabriz, 2007.
[4] M.C. Phocas, A. Pocanschi, Steel frames with bracing mechanism and hysteretic dampers, Earthquake Engineering and Structural Dynamics, 32 (2003) 811-825.
[5] Y. Hosseinzadeh, M. Barghian, M. Emtena, M.K. Dehghan, Experimental and theoretical investigation of steel moment resistance frames retrofitting using cable bracing, Sharif Journal of Civil Engineering, 2-30 (4.2) (2015) 117-125.
[6] X. Hou, H. Tagawa, Displacement-restraint bracing for seismic retrofit of steel moment frames, Journal of Constructional Steel Research, 65 (2009) 1096-1104.
[7] N. Fanaie, S. Aghajani, E.A. Dizaj, Theoretical assessment of the behavior of cable bracing system with central steel cylinder, Advanced in Structural Engineering, 19(3) (2016) 463-472.
[8] N. Fanaie, S. Aghajani, E.A. Dizaj, Strengthening of moment-resisting frame using cable-cylinder bracing, Advanced in Structural Engineering, 19(11) (2016) 1736-1754.
[9] N. Fanaie, N. Zafari, Seismic study of cable-cylinder bracing under near field records, in: Proceeding of the 7th National and 2th International congress of Steel and Structure, Tehran, 2017.
[10] M. Razavi, M.R. Sheidaii, Seismic performance of cable zipper-braced frames, Journal of Constructional Steel Research, 74 (2012) 49-57.
[11] M. Najafi, M. Barghian, Proposing a new cable bracing to retrofit steel frames, Sharif Journal of Civil Engineering, 2-30(4.1) (2015) 121-127.
[12] M. Kurata, R.T. Leon, R. Desroches, Rapid Seismic Rehabilitation Strategy: Concept and Testing of Cable Bracing with Couples Resisting Damper, Journal of Structural Engineering, 138(3) (2012) 354-362.
[13] A. Fateh, F. Hejazi, M.S. Jaafar, I.A. Karim, A.B. Adnan, Design of a variable stiffness bracing system, Mathematical modeling, fabrication, and dynamic analysis, Soil Dynamics and Earthquake Engineering, 80 (2016) 87-101.
[14] A. Mousavi, M. Zahrai, Contribution of pre-slacked cable braces to dynamic stability of non-ductile frames, an analytical study, Engineering Structures, 117 (2016) 305-320. [15] H. Koohkamary, Investigating different arrangement of cable bracing against earthquake in 2D frame, Tabriz, 2015. [16] V. Hejazi, Cable arrangement improvement in steel structures with cable bracing, Tabriz , 2017.
[17] G.F. Giaccu, An equivalent frequency approach for determining non-linear effects on pre-tensioned-cable cross-braced structures, Journal of Sound and Vibration, 422 (2018) 62-78. | ||
|
آمار تعداد مشاهده مقاله: 621 تعداد دریافت فایل اصل مقاله: 701 |
||