مدول برشی کرنش کوچک ماسه های تزریق شده با دوغاب زئولیت-سیمان

[1]    M.W. Hussin, S.K. Lim, F. Zakaria, Engineering properties of high volume slag cement grout in tropical climate, Malaysian Journal of Civil Engineering, 19(1) (2007) 42–54.

[2]    M. Heidarzadeh, A.A. Mirghasemi, F. Eslamian, S.M. Sadr-Lahijani, Application of cement grouting for stabilization of coarse materials. International Journal of Civil Engineering, (1) (2013) 71-77.

[3]    S. Akbulut, A. Saglamer, Estimating the groutability of granular soils: a new approach, Tunnelling and underground space technology, 17(4) (2002) 371-380.

[4]    J. Lowe, T.C. Standford, Special grouting at Tarbela dam project, in: Grouting in Geotechnical Engineering, New Orleans, ASCE, New York, 1982, pp. 152–171.

[5]    G.S. Littlejohn, Design of cement based grouts, in: Grouting in Geotechnical Engineering, New Orleans, ASCE, New York, 1982, pp. 35–48.

[6]    B. De Paoli, B. Bosco, R. Granata, D.A. Bruce, Fundamental observations on cement based grouts (1) Traditional materials, in: Grouting in Geotechnical Engineering, New Orleans, ASCE, New York, 1992, pp. 474–485.

[7]    W.J.Clarke, M.D. Royal, M. Helal, Ultrafine cement tests and dam test grouting, in: Grouting, Soil Improvement and Geosynthetics, New Orleans, ASCE, New York, 1992, pp. 626–638.

[8]    L.G. Schwarz, R.J. Krizek, (1992) ‘Effect of mixing on rheological properties of microfine cement grouts’, Proc. of the Conf. on grouting, soil improvement and geosynthetics, New Orleans, ASCE, New York, 1992, pp. 512–525.

[9]    K.W. Liao, J.C. Fan, C.L. Huang, An artificial neural network for groutability prediction of permeation grouting with microfine cement grouts, Computers and Geotechnics, 38(8) (2011) 978-986.

[10] U. Mutman, A. Kavak, Improvement of granular soils by low pressure grouting, International Journal of Physical Sciences, 6(17) (2011) 4311-4322.

[11] I.A. Pantazopoulos, I.N. Markou, D.N. Christodoulou, A.I. Droudakis, D.K. Atmatzidis, S.K. Antiohos, E. Chaniotakis, Development of microfine cement grouts by pulverizing ordinary cements, Cement and Concrete Composites, 34(5) (2012) 593-603.

[12] M.Y. Cheng, N.D. Hoang, A novel groutability estimation model for ground improvement projects in sandy silt soil based on Bayesian framework, Tunnelling and Underground Space Technology, 43 (2014) 453-458.

[13] I.N. Markou, D.N. Christodoulou, B.K. Papadopoulos, Penetrability of microfine cement grouts: experimental investigation and fuzzy regression modeling, Canadian Geotechnical Journal, 52(7) (2015) 868-882.

[14] M. Mollamahmutoglu, E. Avci, Effectiveness of microfine portland cement grouting on the strength and permeability of medium to fine sands, Periodica Polytechnica Civil Engineering, 59(3) (2015) 319-326.

[15] C.A. Anagnostopoulos, Effect of different superplasticisers on the physical and mechanical properties of cement grouts. Construction and Building Materials, 50 (2014) 162-168.

[16] L.G. Schwarz, R.J. Krizek,  (2006). Hydrocarbon residuals and containment in microfine cement grouted sand, Journal of materials in civil engineering, 18(2) (2006) 214-228.

[17] L.G. Schwarz, M. Chirumalla, Effect of injection pressure on permeability and strength of microfine cement grouted sand, in: Grouting for Ground Improvement: Innovative Concepts and Applications, 2007, pp. 1-15.

[18] N. Saiyouri, A.A. Alaiwa, P.Y. Hicher, Permeability and porosity improvement of grouted sand, European journal of environmental and civil engineering, 15(3) (2011) 313-333.

[19] I.A. Pantazopoulos, D.K. Atmatzidis, Dynamic properties of microfine cement grouted sands, Soil Dynamics and Earthquake Engineering, 42 (2012) 17-31.

[20] I.N. Markou, A.I. Droudakis, Factors affecting engineering properties of microfine cement grouted sands. Geotechnical and Geological Engineering, 31(4) (2013) 1041-1058.

[21] G.A. Rao, Investigations on the performance of silica fume-incorporated cement pastes and mortars, Cement and Concrete Research, 33(11) (2003) 1765-1770.

[22] J.S. Damtoft, J. Lukasik, D. Herfort, D. Sorrentino, E.M. Gartner, Sustainable development and climate change initiatives, Cement and concrete research 38(2) (2008) 115–127.

[23] N. Ansari, A.  Seifi, A system dynamics model for analyzing energy consumption and CO₂ emission in Iranian cement industry under various production and export scenarios, Energy Policy 58 (2013) 75-89.

[24] P.K. Mehta, P.J.M. Monteiro, Concrete microstructure, properties and materials, Mcgraw-hall, 3rd edition, 1993, pp. 15, 21-54.

[25] B. Muhunthan, F. Sariosseiri, Interpretation of geotechnical properties of cement treated soils, Research Report FHWA Contract DTFH61- 05-C-00008, Washington State University, Pullman WA, 2008.

[26] M. Sahmaran, The effect of replacement rate and fineness of natural zeolite on the rheological properties of cement-based grouts, Canadian Journal of Civil Engineering 35(8) (2008) 796-806.

[27] B. Ahmadi, M. Shekarchi, Use of natural zeolite as a supplementary cementitious material, Cement and Concrete Composites, 32(2) (2010) 134-141.

[28] A.H. Ören, A. Kaya, A.S. Kayalar, Hydraulic conductivity of zeolite–bentonite mixtures in comparison with sand–bentonite mixtures, Canadian Geotechnical Journal 48(9) (2011) 1343-1353.

[29] A.A. Ramezanianpour, A. Kazemian, M. Sarvari, B. Ahmadi, Use of natural zeolite to produce selfconsolidating concrete with low Portland cement content and high durability, Journal of Materials in Civil Engineering 25(5) (2012) 589-596.

[30] Y.B. Acar, A.E. El-Tahir, Low strain dynamic properties of artificially cemented sand, Journal of Geotechnical Engineering, 112(11) (1986) 1001-1015.

[31] S.K. Saxena, K.R. Reddy, A.S.  Avramidis, Liquefaction resistance of artificially cemented sand, Journal of Geotechnical Engineering, 114(12) (1988) 1395-1413.

[32] T.S. Chang, R.D. Woods, Effect of particle contact bond on shear modulus, Journal of Geotechnical Engineering 118(8) (1992) 1216-1233.

[33] Sharma, S. S. & Fahey, M. 2004. Deformation characteristics of two cemented calcareous soils. Canadian Geotechnical Journal 41: 1139-1151

[34] S. Seng, H. Tanaka, Properties of cement-treated soils during initial curing stages, Soils and Foundations, 51(5) (2011) 775-784.

[35] T. Cuccovillo, M.R. Coop, (1997). Yielding and prefailure behaviour of structured sands, Geotechnique 47(3) (1997) 491-508.

[36] S. Baig, M. Picornell, S. Nazarian, Low strain shear moduli of cemented sands, Journal of Geotechnical and Geoenvironmental Engineering, 123(6) (1997) 540–545.

[37] A.L. Fernandez,  J.C. Santamarina, Effect of cementation on the small-strain parameters of sands, Canadian Geotechnical Journal, 38(1) (2001) 191-199.

[38] C. Dano, P.Y. Hicher, Behavior of uncemented sands and grouted sands before peak strength, Soils and foundations, 43(4) (2003) 13-19.

[39] H. Mola-Abasi, B. Kordtabar, A. Kordnaeij, Effect of Natural Zeolite and Cement Additive on the Strength of Sand, Geotechnical and Geological Engineering, 34(5) (2016) 1539-1551.

[40] H. Mola-Abasi, A. Khajeh, S. Naderi Semsani, Porosity/(SiO₂ and Al₂O₃ Particles) Ratio Controlling Compressive Strength of Zeolite-Cemented Sands, Geotechnical and Geological Engineering, 36(2) (2018) 949-958.

[41] H. Mola-Abasi, A. Khajeh, S. Naderi Semsani, Effect of the Ratio between Porosity and SiO2 and Al2O3 on Tensile Strength of Zeolite-Cemented Sands. Journal of Materials in Civil Engineering, 30(4) (2018).

[42] S. Salamatpoor, Y. Jafarian, A. Hajiannia, Physical and mechanical properties of sand stabilized by cement and natural zeolite, The European Physical Journal Plus, 133(5) (2018) 205.

[43] S. Salamatpoor, Y. Jafarian, A. Hajiannia, Improvement of shallow foundations rested on saturated loose sand by zeolite-cement mixture: a laboratory study, Scientia Iranica, (2018)

[44] L.G. Schwarz, R.J. Krizek, 1994. Effect of preparation technique on permeability and strength of cementgrouted sand, Geotechnical Testing Journal, 17 (1994) 434–443.

[45] E. Delfosse-Ribay, I. Djeran-Maigre, R. Cabrillac, D. Gouvenot, Shear modulus and damping ratio of grouted sand, Soil Dynamics and Earthquake Engineering, 24 (2004) 461–71.

[46] M. Yildiz, A.S. Soganci, (2015). Improvement of the strength of soils which comprises granular pumice by injection of cement under low pressure, Scientia Iranica. Transaction A, Civil Engineering, 22(1) (2015) 81.

[47] C. Dano, N. Derache, Grout injection in the laboratory. In: Landmarks in Earth Reinforcement, Int. Symp. on Earth Reinforcement, 2001, pp. 21-26.

[48] M. Mollamahmutoglu, Y. Yilmaz, Engineering properties of medium-to-fine sands injected with microfine cement grout, Marine Georesources and Geotechnology, 29(2) (2011) 95-109.

[49] E. Avci, M. Mollamahmutoğlu, UCS Properties of Superfine Cement–Grouted Sand, Journal of Materials in Civil Engineering, 28(12) (2016).

[50] S. Kumar, A study on the engineering behaviour of grouted loose sandy soils (Doctoral dissertation, Ph. D. thesis, Division of Civil Engineering, Cochin University of Science and Technology, India), (2010)

[51] ASTM D2487, Standard Practice for Classification of Soils for Engineering Purposes (unified Soil Classification System), West Conshohocken: ASTM International, 2017.

[52] ASTM D854, Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer, West Conshohocken: ASTM International, 2014.

[53] ASTM D4253, Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table, West Conshohocken: ASTM International, 2016.

[54] ASTM D4254, Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density, West Conshohocken: ASTM International, 2016.

[55] ASTM D7928, Standard Test Method for ParticleSize Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis, West Conshohocken: ASTM International, 2017.

[56] ASTM D4320/D4320M, Standard Practice for Laboratory Preparation of Chemically Grouted Soil Specimens for Obtaining Design Strength Parameters, West Conshohocken: ASTM International, 2009.

[57] ASTM D445, Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity), West Conshohocken: ASTM International, 2017.

[58] E.E. Toumbakari, D.V. Gemert, T.P. Tassios, N. Tenoutasse, Effect of mixing procedure on injectability of cementitious grouts, Cement and Concrete Research, 29 (1999) 867-872.

[59] S. Akbulut, The improvement of geotechnical properties in granular soils by grouting, Ph.D. Dissertation, the Institute of the Istanbul Technical University, Istanbul, Turkey, 1999.

[60] S. Perret, K.H. Khayat, G. Ballivy, The effect of degree of saturation of sand on groutability—Experimental simulation, Ground Improvement, 4 (2000) 13–22.

[61] J.C. Dupla, J. Canou, D. Gouvenot, An advanced experimental set-up for studying a monodirectional grout injection process, Ground Improvement, 8(3) (2004) 91–99.

[62] ASTM D4219, Standard Test Method for Unconfined Compressive Strength Index of Chemical- Grouted Soils, West Conshohocken: ASTM International, 2008.

[63] R. Dyvik, C. Madshus, Lab Measurements of G m a x Using Bender Elements, in: Advances in the art of testing soils under cyclic conditions, 1985, pp. 186–196

[64] P.J.P. Gleize, A. Müller, H.R. Roman, Microstructural investigation of a silica fume–cement–lime mortar, Cement and Concrete composites, 25(2) (2003)171– 175.

[65] D. Porcino, V.N. Ghionna, R. Granata, V. Marcianò, Laboratory determination of mechanical and hydraulic properties of chemically grouted sands, Geomechanics and Geoengineering, 11(2) (2016) 164-175.

[66] S. Zebovitz, R.J. Krizek, D.K. Atmatzidis, Injection of fine sands with very fine cement grout, Journal of geotechnical engineering, 115(12) (1989) 1717-1733.

[67] C. Dano, P.Y. Hicher, S. Tailliez, Engineering properties of grouted sands, Journal of Geotechnical and Geoenvironmental engineering, 130(3) (2004)328-338.