بررسی آزمایشگاهی جایگزینی درصدهای مختلف زئولیت با سیمان بر بهبود مشخصات مکانیکی و دوام بتن در دماهای بالا

[1]J.S. Damtoft, J. Lukasik, D. Herfort, D. Sorrentino, E.M.Gartner, Sustainable development and climate change initiatives, Cement and concrete research, 38(2) (2008) .721-511

[2]M. Valipour, M. Yekkalar, M. Shekarchi, S. Panahi, Environmental assessment of green concrete containing natural zeolite on the global warming index in marine environments, Journal of Cleaner Production, 65 (2014) 418-423.

[3]C. Astm, 618-05: Specifications for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete, American Society for Testing and Materials (ASTM International), 100 (2005) 19428-12959.

[4]R. Madandoust, J. Sobhani, P. Ashoori, Concrete made with zeolite and metakaolin: A comparison on the strength and durability properties,  (2013).

[5]C.-S. Poon, S. Azhar, M. Anson, Y.-L. Wong, Comparison of the strength and durability performance of normaland high-strength pozzolanic concretes at elevated temperatures, Cement and concrete research, 31(9) (2001) 1291-1300.

[6]É. Lublóy, K. Kopecskó, G.L. Balázs, Á. Restás, I.M. Szilágyi, Improved fire resistance by using Portland-pozzolana or Portland-fly ash cements, Journal of Thermal Analysis and Calorimetry, 129(2) (2017) 925-936.

[7]K.V. Teja, T. Meena, A.N. Reddy, Investigation on Metakaolin and Silicafume Incorporated Concrete under Elevated Temperature, IJCMS, 7 (2018).

[8]M. Morsy, Y. Al-Salloum, H. Abbas, S. Alsayed, Behavior of blended cement mortars containing nano-metakaolin at elevated temperatures, Construction and Building materials, 35 (2012) 900-905.

[9]M. Saridemir, M. Severcan, M. Ciflikli, S. Celikten, F. Ozcan, C. Atis, The influence of elevated temperature on strength and microstructure of high strength concrete containing ground pumice and metakaolin, Construction and Building Materials, 124 (2016) 244-257.

[10]B. Demirel, O. Keleştemur, Effect of elevated temperature on the mechanical properties of concrete produced with finely ground pumice and silica fume, Fire Safety Journal, .193-583 )0102( )8-6(54

[11]W.L. Baloch, R.A. Khushnood, S.A. Memon, W. Ahmed, S. Ahmad, Effect of elevated temperatures on mechanical performance of normal and lightweight concretes reinforced with carbon nanotubes, Fire technology, 54(5) (2018) 1331-1367.

[12]Z. Pan, Z. Tao, Y. Cao, R. Wuhrer, T. Murphy, Compressive strength and microstructure of alkali-activated fly ash/

slag binders at high temperature, Cement and Concrete Composites, 86 (2018) 9-18.

[13]M. Valipour, F. Pargar, M. Shekarchi, S. Khani, Comparing a natural pozzolan, zeolite, to metakaolin and silica fume in terms of their effect on the durability characteristics of concrete: A laboratory study, Construction and Building Materials, 41 (2013) 879-888.

[14]T. Markiv, O. Huniak, K. Sobol, Optimization of concrete composition with addition of zeolitic tuff, Вісник Національного університету Львівська політехніка. Теорія і практика будівництва, (781) (2014) 116-120.

[15]K. Samimi, S. Kamali-Bernard, A.A. Maghsoudi, M. Maghsoudi, H. Siad, Influence of pumice and zeolite on compressive strength, transport properties and resistance to chloride penetration of high strength self-compacting concretes, Construction and Building Materials, 151 (2017) 292-311.

[16]M. Najimi, J. Sobhani, B. Ahmadi, M. Shekarchi, An experimental study on durability properties of concrete containing zeolite as a highly reactive natural pozzolan, Construction and Building Materials, 35 (2012) 10231033.

[17]B. Ahmadi, M. Shekarchi, Use of natural zeolite as a supplementary cementitious material, Cement and Concrete Composites, 32(2) (2010) 134-141.

[18]D. Nagrockiene, G. Girskas, Research into the properties of concrete modified with natural zeolite addition, Construction and Building Materials, 113 (2016) 964969.

[19]S.Y. Chan, X. Ji, Comparative study of the initial surface absorption and chloride diffusion of high performance zeolite, silica fume and PFA concretes, Cement and Concrete Composites, 21(4) (1999) 293-300.

[20]A.A. Ramezanianpour, R. Mousavi, M. Kalhori, J. Sobhani, M. Najimi, Micro and macro level properties of natural zeolite contained concretes, Construction and Building Materials, 101 (2015) 347-358.

[21]T. Perraki, G. Kakali, F. Kontoleon, The effect of natural zeolites on the early hydration of Portland cement, Microporous and mesoporous materials, 61(1-3) (2003) .212-502

[22]C. Karakurt, İ.B. Topçu, Effect of blended cements with natural zeolite and industrial by-products on rebar corrosion and high temperature resistance of concrete, Construction and Building Materials, 35 (2012) 906-911.

[23]M. Wilson, M. Carter, W. Hoff, British Standard and RILEM water absorption tests: A critical evaluation, Materials and Structures, 32(8) (1999) 571-578.

[24]W. Kubissa, R. Jaskulski, Measuring and time variability of the sorptivity of concrete, Procedia Engineering, 57 (2013) 634-641.

[25]M. Mahdikhani, O. Bamshad, M.F. Shirvani, Mechanical properties and durability of concrete specimens containing nano silica in sulfuric acid rain condition, Construction and building materials, 167 (2018) 929-935.

[26]M. Jalal, A.R. Pouladkhan, H. Norouzi, G. Choubdar, Chloride penetration, water absorption and electrical resistivity of high performance concrete containing nano silica and silica fume, Journal of American science, 8(4) (2012) 278-284.

[27]S. Kakooei, H.M. Akil, M. Jamshidi, J. Rouhi, The effects of polypropylene fibers on the properties of reinforced concrete structures, Construction and Building Materials, 27(1) (2012) 73-77.

[28]Beglarigale, F. Ghajeru, H. Yigiter, H. Yazici, Permeability characterization of concrete incorporating fly ash, in:  Proceedings of the 11th International Congress on Advances in Civil Engineering, Istanbul, Turkey, 2014.

[29]C. ASTM, Standard specification for concrete aggregates, Philadelphia, PA: American Society for Testing and Materials,  (2003).

[30]C. Astm, 618-05: Specifications for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete, American Society for Testing and Materials (ASTM International), 100 (2005) 19428-12959.

[31]C. Take, slump tests for every test cylinders in accordance with ANSI, ASTM C143.

[32]Behnood, H. Ziari, Effects of silica fume addition and water to cement ratio on the properties of high-strength concrete after exposure to high temperatures, Cement and Concrete Composites, 30(2) (2008) 106-112.

[33]G. Baker, The effect of exposure to elevated temperatures on the fracture energy of plain concrete, Materials and structures, 29(6) (1996) 383.

[34]C.C. dos Santos, J.P.C. Rodrigues, Calcareous and granite aggregate concretes after fire, Journal of Building Engineering, 8 (2016) 231-242.

[35]F. Vodák, K. Trtık, O. Kapičková, Š. Hošková, P. Demo, The effect of temperature on strength–porosity relationship for concrete, Construction and building materials, 18(7) (2004) 529-534.

[36]K. S. Rao, S. R. K. A. L. Narayana, Comparison of Performance of Standard Concrete And Fibre Reinforced Standard Concrete Exposed To Elevated Temperatures, Am. J. Eng. Res, 3 (2013) 20-26.

[37]B. Standard, Testing hardened concrete, Compressive Strength of Test Specimens, BS EN,  (2009) 12390-12393.

[38]F.A. Sabet, N.A. Libre, M. Shekarchi, Mechanical and durability properties of self consolidating high performance concrete incorporating natural zeolite, silica fume and fly ash, Construction and Building Materials, 44 (2013) 175-184.

[39]H. Eskandari, M. Vaghefi, K. Kowsari, Investigation of mechanical and durability properties of concrete influenced by hybrid nano silica and micro zeolite, Procedia Materials Science, 11 (2015) 594-599.

[40]J. Xiao, Q. Xie, W. Xie, Study on high-performance concrete at high temperatures in China (2004–2016)-An updated overview, Fire safety journal, 95 (2018) 11-24.

[41]C. Castillo, Effect of transient high temperature on highstrength concrete, 1987.

[42]G.-F. Peng, Z.-S. Huang, Change in microstructure of hardened cement paste subjected to elevated temperatures, Construction and Building Materials, 22(4) (2008) 593599.

[43]F. Fingerloos, Buchbesprechung: fib Bulletin 38: Fire design of concrete structures–materials, structures and modelling, Beton‐und Stahlbetonbau, 102(9) (2007) 662.266

[44]Rashad, Y. Bai, P. Basheer, N. Collier, N. Milestone, Chemical and mechanical stability of sodium sulfate activated slag after exposure to elevated temperature, Cement and Concrete Research, 42(2) (2012) 333-343.

[45]E.C.f. Standardization, Design of concrete structures—Part 1-2: General rules—Structural fire design, EN 1992 Eurocode 2,  (2004).

[46]ANSI, AISC 360-10, Chicago, IL,  (2010).

[47]C. ASTM, 496/C 496M–04. 2004, Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens. West Conshohocken (PA): ASTM International.

[48]B. EN, 1-1. Eurocode 2: Design of concrete structures–Part 1-1: General rules and rules for buildings, European Committee for Standardization (CEN),  (2004).

[49]T. Markiv, K. Sobol, M. Franus, W. Franus, Mechanical and durability properties of concretes incorporating natural zeolite, Archives of civil and mechanical engineering, 16 (2016) 554-562.

[50]P.C. Silva, R.M. Ferreira, H. Figueiras, Electrical resistivity as a means of quality control of concrete–influence of test procedure, in:  International Conference on Durability of Building Materials and Components, Portugal, 2011, pp. .51-21.