مطالعه رفتار خاک ماسه‌ای گچ‌دار شهر نجف در حضور مکش بافتی با استفاده از دستگاه سه‌محوری غیر اشباع

[1] Fredlund, D.G. and Rahardjo, H. 1993. Soil mechanics for unsaturated soils, John Wiley & Sons, Canada.

[2] Lu, N. and Likos, W. J. 2004. Unsaturated soil mechanics,

1st ed, Wiley, Canada.

[3] Fredlund, D. G., and Morgenstern, N. R. 1977. “Stress state variables for unsaturated soils”. Journal of Geotechnical Division, 103(5), pp. 447-466.

[4] Handoko, L., Yasufuku, N., Oomine, K., and Hazarika, H.

2013. “Suction controlled triaxial apparatus for saturatedunsaturated soil test”. International Journal of Geomate, 4(1), pp. 466-470.

[5] Escario, V., and Saez, J. 1986. “The shear strength of partly saturated soils”. Geotechnique, 36(3), pp. 453-456.

[6] Rassam, D. W., and Freeman, C. 2002. “Predicting the shear strength envelope of unsaturated soils”.

Geotechnical Testing Journal, GTJODJ, 25(2), pp. 215–

220, DOI: org/10.1520/GTJ11365J

[7] Guan, G. S., Rahardjo, H., and Choon, L. E. 2009. “Shear strength equations for unsaturated soil under drying and wetting”. Journal of Geotechnical and Geoenvironmental

Engineering, 136(4), pp. 594-606, DOI: 10.1061/(ASCE)

GT.1943-5606.0000261

[8] Tami, D., Rahardjo, H., and Leong, E. C. 2007. “Characteristics of scanning curves of two soils”. Soils and Foundations, 47(1), pp. 97-108, DOI: org/10.3208/ sandf.47.97

[9] Liu, Q., Yasufuku, N., Omine, K., and Hazarika, H. 2012. “Automatic soil water retention test system with volume change measurement for sandy and silty soils”. Soils and Foundations, 52(2), pp. 368-380, DOI:10.1016/j. sandf.2012.02.012.

[10] [Mendoza, C. and Colmenares, J. (2006). “Influence of the suction on the stiffness at very small strains.” 4th Int. Conf. on Unsaturated Soils, ASCE, pp. 529-540, DOI: 10.1061/40802(189)40

[11] Nyunt, T. T., Leong, E. C., and Rahardjo, H. 2011. “Strength and small-strain stiffness characteristics of unsaturated sand”. Geotechnical Testing Journal, 34(5), pp. 551-561, DOI: 10.1520/GTJ103589, ISSN 0149-6115

[12] Shen, Z., Jiang, M., and Thornton, C. 2016. “Shear strength of unsaturated granular soils: three-dimensional discrete element analyses”. Granular Matter, Springer, 18(3), pp. 37, DOI: 10.1007/s10035-016-0645-x

[13] Haeri, S. M., Garakani, A. A., Khosravi, A., and Meehan, Ch. L. 2014. “Assessing the hydro mechanical behavior of collapsible soils using a modified triaxial test device”. Geotechnical Testing Journal, 37(2), pp. 190–204, DOI: 10.1520/GTJ20130034, ISSN 0149-6115

[14] Ng, Ch. W. W. and Menzies, B. 2007. Advanced unsaturated soil mechanics and engineering, 1st ed., Taylor & Francis Group, Canada.

[15] Aldaood, A., Bouasker, M. and Al-Mukhtar, M. 2013. “Stability behavior of lime stabilized gypseous soil under long-term soaking”. 2nd Int. Conf. on Geotechnical and Earthquake Engineering, pp. 170-177.

[16] Solis, R. and Zhang, J. (2007). “Gypsiferous soils: an engineering problem.” 11th Multidisciplinary Conf. on Sinkholes and the Engineering and Environmental Impacts of Karst, ASCE, Florida, U.S.A., DOI: 10.1061/41003(327)72

[17] Al-Shakerchy, M. Sh. M., 2007. “Geotechnical properties of Al Najaf city soil with emphasis on the infiltration and strength characteristics”. PhD Thesis, Building and Construction Dept., University of Technology, Baghdad, Iraq.

[18] Al-Saoudi, N. K. S. and Al-Shakerchy, M. Sh. M. (2010). “Statistical analysis of some geotechnical properties of Najaf city.” Proc. Int. Geotechnical Conference, Vol. 3, Moscow, Russia, pp. 1173-1180.

[19] Al-Saoudi, N., Al-Khafaji, A. and Al-Mosawi, M. (2013). “Challenging problems of gypseous soils in Iraq.” Proc. 18th Int. Conf. on Soil Mechanics and Geotechnical Engineering, France, pp. 479-482.

[20] Razouki, S. S., and Al-Azawi, M. S. 2003. “Long–term soaking effect on strength and deformation characteristics of a gypsiferous subgrade soil”. Engineering Journal of the University of Qatar, 16, pp. 49-60.

[21] Salman, A. D. 2011. “Soaking effects on the shear strength parameters and bearing capacity of soil”. Eng. & Tech. Journal, University of Technology, Baghdad, Iraq, 29(6), pp. 1107-1123.

[22] Mahmood, M. Sh. 2017. “Effect of time-based soaking on shear strength parameters of sand soils”. Applied Research Journal, Iran, 3(5), pp. 142-149.

[23] Mahmood, M. Sh. 2018. “Effect of soaking on the compaction characteristics of Al-Najaf sand soil”. Kufa Journal of Engineering, Iraq, 9(2), pp. 1-12.

[24] Razouki, S. S., and Salem, B. M. 2014. “Soaking–drying frequency effect on gypsum-rich roadbed sand”. International Journal of Pavement Engineering, 15(10),

10. 933-939, DOI:10.1080/10298436.2014.893326

[25] Razouki, S. S., and Salem, B. M. 2015. “Impact of soaking–drying cycles on gypsum sand roadbed soil”.

Transportation Geotechnics, 2, pp. 78-85, DOI:10.1016/j. trgeo.2014.11.003

[26] Akhtarpour, A., Mahmood, M. Sh., Almahmodi, R. and Abdal Husain, M. M. (2018). “Settlement of gypseous sand upon short-term wetting.” Proc. Int. Cong. on Engineering and Architecture, Alanya, Turkey, pp. 18071820.

[27] Ahmed, K. I., 2013. “Effect of gypsum on the hydromechanical characteristics of partially saturated sandy soil”. PhD Thesis, Cardiff University, UK.

[28] Abdal Husain, M. M., Akhtarpour, A. and Mahmood, M. Sh. 2018. “Wetting challenges on the gypsiferous soils.” Proc. 4th Int. Cong. on Sustainable Development, Shiraz, Iran.

[29] Aversa, S., and Nicotera, M. 2002. “A triaxial and oedometer apparatus for testing unsaturated soils”. Geotechnical Testing Journal, 25(1), pp. 3-15, DOI: 10.1520/GTJ11075J, ISSN 0149-6115

[30] Cabarkapa, Z., and Cuccovillo, T. 2006. “Automated triaxial apparatus for testing unsaturated soils”. Geotechnical Testing Journal, 29(1), pp. 21-29, DOI: org

/10.1520/GTJ12310. ISSN 0149-6115

[31] Padilla , J. M.,  Houston, W. N.,  Lawrence, C. A., Fredlund, D. G.,  Houston, S. L.  and Perez, N. P. (2006). “An automated triaxial testing device for unsaturated soils.” 4th Int. Conf. on Unsaturated Soils, ASCE, pp. 1775-1786, DOI: 10.1061/40802(189)149

[32] Haeri S.M., Zamani A. and Garakani A.A. 2012. “Collapse potential and permeability of undisturbed and remolded loessial soil samples”. Unsaturated Soils: Research and Applications, Springer, Berlin, Germany, pp. 301-308, DOI: 10.1007/978-3-642-31116-1_41

[33] Ahmad, F., Said, M. A., and Najah, L. 2012. “Effect of leaching and gypsum content on properties of gypseous soil”. International Journal of Scientific and Research Publications, 2(9), pp. 1-5.

[34] Al-Dabbas, M. A., Schanz, T., and Yassen, M. J. 2010. “Comparison of gypsiferous soils in Samarra and Karbala areas, Iraq”. Iraqi Bulletin of Geology and Mining, 6(2), pp. 115- 126.

[35] Barazanji, A. F., 1973. “Gypsiferous soils of Iraq”. DSc Thesis; State University of Ghent, Belgium.

[36] Nashat, I. H., 1990. “Engineering characteristics of some gypseous soil in Iraq”. PhD Thesis, University of Baghdad, Baghdad, Iraq.

[37] Al- Mufty A. A., 1997. “Effect of gypsum dissolution on the mechanical behavior of gypseous soils”. PhD Thesis, University of Baghdad, Baghdad, Iraq.

[38] Ladd, R. S. 1978. “Preparing test specimens using undercompaction”. Geotechnical Testing Journal, GTJODJ, 1(1), pp. 16-23.