پیوندهای مفید
آمار
| تعداد نشریات | 7 |
| تعداد شماره‌ها | 399 |
| تعداد مقالات | 5,389 |
| تعداد مشاهده مقاله | 5,288,013 |
| تعداد دریافت فایل اصل مقاله | 4,882,754 |
بررسی آزمایشگاهی و عددی تاثیر الیاف فولادی بر رفتار بتن الیافی تحت تنش چند محوری | ||
| نشریه مهندسی عمران امیرکبیر | ||
| مقاله 23، دوره 53، شماره 6، شهریور 1400، صفحه 2657-2678 اصل مقاله (1.69 M) | ||
| نوع مقاله: مقاله پژوهشی | ||
| شناسه دیجیتال (DOI): 10.22060/ceej.2020.17462.6576 | ||
| نویسندگان | ||
| غلامرضا باغبان گل‌پسند؛ مسعود فرزام* ؛ سیامک سلیمانی شیشوان | ||
| گروه سازه دانشکده عمران، دانشگاه تبریز، تبریز، ایران | ||
| چکیده | ||
| بتن یکی از پرکاربردترین مصالح ساختمانی در جهان به شمار می‌آید و استفاده از بتن الیافی در سازه‌ها برای افزایش مقاومت کششی و بهبود رفتار آن، در دهه‌های اخیر توسعه زیادی یافته است. برای بررسی عددی رفتار بتن الیافی، باید معادلات ساختاری آن تعیین گردد. این معادلات بایستی شامل روابطی جهت اعمال اثرات الیاف در رفتار بتن الیافی باشد. در این تحقیق، رفتار بتن‌های با الیاف فولادی حاوی مقادیر متفاوت الیاف، تحت فشار سه‌محوری با مقادیر فشار محصور‌کننده متفاوت، به دو صورت تجربی و عددی، بررسی می‌شود. در آزمایش‌های سه‌محوری از سلول هوک استفاده می‌گردد. در بررسی عددی، معادلات ساختاری با معیار گسیختگی پنج پارامتری ویلیام- وارنکه ، تابع سخت‌شدگی و نرم‌شدگی ایزوتروپیک و پلاستیسیته غیر‌همبسته استفاده شده و برای انتگرال‌گیری از معادلات ساختاری، روش انتگرال‌گیری گامک به‌کار می‌رود. برای اعمال اثر الیاف بر سطح تسلیم، ضریبKt با استفاده از نتایج آزمایش‌های دومحوری روی نمونه‌های بتن با الیاف فولادی تعیین می‌شود. معادلات ساختاری با استفاده از سابروتین UMAT در نرم افزار ABAQUS کد‌نویسی شده و نمونه‌های آزمایشگاهی مدل‌سازی می‌شوند. مقایسه نتایج به‌دست آمده از مدل‌سازی عددی به صورت منحنی تنش-کرنش و مقاومت حداکثر نمونه‌های SFRC با نتایج آزمایشگاهی انطباق قابل قبولی را نشان می‌دهد. در نهایت با توجه به انطباق نتایج عددی و آزمایشگاهی، نتیجه گرفته شد که می توان با اطمینان قابل قبولی از مدل عددی برای پیش بینی رفتار نمونه‌های SFRC استفاده کرد. | ||
| کلیدواژه‌ها | ||
| بتن با الیاف فولادی(SFRC)؛ معادلات ساختاری؛ آزمایش‌های فشار سه‌محوری؛ روش انتگرال‌گیری گامک؛ پلاستیسیته غیر همبسته | ||
| موضوعات | ||
| تکنولوژی بتن؛ مصالح نوین جهت اصلاح خواص بتن؛ مکانیک شکست سازه بتنی | ||
| عنوان مقاله [English] | ||
| Experimental and numerical investigation of the effect of steel fiber on fiber reinforced concrete under multiaxial compression | ||
| نویسندگان [English] | ||
| Gholamreza Baghban Golpasand؛ غلامرضا Farzam؛ Siamak Soleymani Shishvan | ||
| Department of Structural Engineering, University of Tabriz, Tabriz, Iran | ||
| چکیده [English] | ||
| Concrete is one of the most widely used building materials in the world and the use of fiber-reinforced concrete (FRC) in structures to increase its tensile strength and improve its behavior has been extensively developed in recent decades. It is necessary to determine the constitutive equations of FRCs when the numerical investigation of their behavior is running. These equations should be including relations to handle the effect of steel fibers on the behavior of FRC. In this study, the behavior of FRCs with a different percent of steel fiber under triaxial compression, with different values of confining pressure, is experimentally and numerically investigated. Hoek cell is used in triaxial tests. In the numerical simulation, five-parametric constitutive equations with Willam-Warnke (W-W) failure criterion, isotropic hardening/softening function and non-associated plasticity were used and substepping integration method was carried out for integration of constitutive equations. For applying the effect of steel fibers on the failure surface, Kt coefficient was determined from the results of biaxial experimental tests on SFRCs. The constitutive equations are implemented with UMAT subroutine in ABAQUS and specimens are simulated in ABAQUS. By the comparison of the experimental (maximum strength) results and the numerical (stress-strain curve) results, an acceptable agreement was seen between them. Finally, based on the consistency between experimental and numerical results, it was concluded that the numerical model could be used, with enough confidence, to predict the behavior of SFRCs specimens. | ||
| کلیدواژه‌ها [English] | ||
| Steel fiber reinforced concrete (SFRC), Constitutive equations, Triaxial test, Substepping integration, non-associated plasticity | ||
|
سایر فایل های مرتبط با مقاله
|
||
| مراجع | ||
|
[1] M. Gul, A. Bashir, J.A. Naqash, Study of modulus of elasticity of steel fiber reinforced concrete, International Journal of Engineering Advanced Technology, 3(4) (2014) 304-309. [2] P.N. Balaguru, S.P. Shah, Fiber-reinforced cement composites, McGraw-Hill, the University of Michigan, 1992. [3] S.J. Pantazopoulou, M. Zanganeh, Triaxial tests of fiber-reinforced concrete, Journal of Materials in Civil Engineering, 13(5) (2001) 340-348. [4] B. Chun, D.-Y. Yoo, Hybrid effect of macro and micro steel fibers on the pullout and tensile behaviors of ultra-high-performance concrete, Composites Part B: Engineering, 162 (2019) 344-360. [5] J. Han, M. Zhao, J. Chen, X. Lan, Effects of steel fiber length and coarse aggregate maximum size on mechanical properties of steel fiber reinforced concrete, Construction and Building Materials, 209 (2019) 577-591. [6] A. Amin, S.J. Foster, R.I. Gilbert, W. Kaufmann, Material characterisation of macro synthetic fibre reinforced concrete, Cement and Concrete Composites, 84 (2017) 124-133. [7] Y. Zhang, K. Zhao, Y. Li, J. Gu, Z. Ye, J. Ma, Study on the local damage of SFRC with different fraction under contact blast loading, Computers and Concrete, 22(1) (2018) 63-70. [8] F. Ansari, Q. Li, High-strength concrete subjected to triaxial compression, ACI Materials Journal, 95(6) (1998) 747-755. [9] X. Lu, C.-T.T. Hsu, Behavior of high strength concrete with and without steel fiber reinforcement in triaxial compression, Cement and Concrete Research, 36(9) (2006) 1679-1685. [10] Y. Ren, Z. Yu, Q. Huang, Z. Ren, Constitutive model and failure criterions for lightweight aggregate concrete: A true triaxial experimental test, Construction and Building Materials, 171 (2018) 759-769. [11] J.-C. Chern, H.-J. Yang, H.-W. Chen, Behavior of steel fiber reinforced concrete in multiaxial loading, ACI Materials Journal, 89(1) (1993) 32-40. [12] Y. Farnam, M. Moosavi, M. Shekarchi, S.K. Babanajad, A. Bagherzadeh, Behaviour of Slurry Infiltrated Fibre Concrete (SIFCON) under triaxial compression, Cement and Concrete Research, 40(11) (2010) 1571-1581. [13] J.-f. Jiang, P.-c. Xiao, B.-b. Li, True-triaxial compressive behaviour of concrete under passive confinement, Construction and Building Materials, 156 (2017) 584-598. [14] A. Blanco, P. Pujadas, S. Cavalaro, A. de la Fuente, A. Aguado, Constitutive model for fibre reinforced concrete based on the Barcelona test, Cement and Concrete Composites, 53 (2014) 327-340. [15] W.F. Chen, Plasticity in Reinforced Concrete, J. Ross Pub., 2007 [16] P. Grassl, K. Lundgren, K. Gylltoft, Concrete in compression: a plasticity theory with a novel hardening law, International Journal of Solids and Structures, 39(20) (2002) 5205-5223. [17] G.B. Golpasand, M. Farzam, S.S. Shishvan, FEM investigation of SFRCs using a substepping integration of constitutive equations, Computers and Concrete, 25(2) (2020) 181. [18] H. Othman, H. Marzouk, Applicability of damage plasticity constitutive model for ultra-high performance fibre-reinforced concrete under impact loads, International Journal of Impact Engineering, 114 (2018) 20-31. [19] Z.P. Bažant, F.C. Caner, I. Carol, M.D. Adley, S.A. Akers, Microplane model M4 for concrete. I: Formulation with work-conjugate deviatoric stress, Journal of Engineering Mechanics, 126(9) (2000) 944-953. [20] I.C. Mihai, A.D. Jefferson, P. Lyons, A plastic-damage constitutive model for the finite element analysis of fibre reinforced concrete, Engineering Fracture Mechanics, 159 (2016) 35-62. [21] X. Liang, C. Wu, Meso-scale modelling of steel fibre reinforced concrete with high strength, Construction and Building Materials, 165 (2018) 187-198. [22] K.J. William, E.P. Warnke, Constitutive Model for the Triaxial Behavior of Concrete, INTERNATIONAL ASSOCIATION FOR BRIDGE AND STRUCTURAL ENGINEERING PROCEEDINGS, 19 (1975) 1-30. [23] Y. Chi, L. Xu, H.-s. Yu, Constitutive modeling of steel-polypropylene hybrid fiber reinforced concrete using a non-associated plasticity and its numerical implementation, Composite Structures, 111 (2014) 497-509. [24] L.A.G. Bitencourt, O.L. Manzoli, T.N. Bittencourt, F.J. Vecchio, Numerical modeling of steel fiber reinforced concrete with a discrete and explicit representation of steel fibers, International Journal of Solids and Structures, 159 (2019) 171-190. [25] E.A. Rodrigues, O.L. Manzoli, L.A.G. Bitencourt, T.N. Bittencourt, M. Sánchez, An adaptive concurrent multiscale model for concrete based on coupling finite elements, Computer Methods in Applied Mechanics and Engineering, 328 (2018) 26-46. [26] S.W. Sloan, Substepping schemes for the numerical integration of elastoplastic stress–strain relations, 24(5) (1987) 893-911. [27] Z. Guo, The strength and deformation of concrete—Experimental results and constitutive relationship, Tsinghua university press, Beijing, 1997. [28] S. Lan, Z. Guo, Experimental investigation of multiaxial compressive strength of concrete under different stress paths, ACI Materials Journal, 94(5) (1997) 427-434. [29] S.W. Sloan, A.J. Abbo, D. Sheng, Refined explicit integration of elastoplastic models with automatic error control, Engineering Computations, 18(1/2) (2001) 121-194. [30] H. Kupfer, H.K. Hilsdorf, H. Rusch, Behavior of concrete under biaxial stresses, ACI Journal Proceedings, 66(8) (1969) 656-666. [31] S. Swaddiwudhipong, P.E.C. Seow, Modelling of steel fiber-reinforced concrete under multi-axial loads, Cement and Concrete Research, 36(7) (2006) 1354-1361. [32] G. Zhao, M. di Prisco, L. Vandewalle, Experimental investigation on uniaxial tensile creep behavior of cracked steel fiber reinforced concrete, Materials and Structures, 48(10) (2015) 3173-3185 [33] D. Candappa, J. Sanjayan, S. Setunge, Complete triaxial stress-strain curves of high-strength concrete, Journal of Materials in Civil Engineering, 13(3) (2001) 209-215. [34] J.B. Mander, M.J. Priestley, R. Park, Theoretical stress-strain model for confined concrete, Journal of structural engineering, 114(8) (1988) 1804-1826. [35] ASTM-C801, Standard Test Method for Determining the Mechanical Properties of Hardened Concrete Under Triaxial Loads, in, American Society for Testing and Materials, 1998. [36] Y. Chi, L. Xu, H.-S. Yu, Plasticity model for hybrid fiber-reinforced concrete under true triaxial compression, Journal of Engineering Mechanics, 140(2) (2013) 393-405. [37] K. Murugappan, P. Paramasivam, K. Tan, Failure envelope for steel-fiber concrete under biaxial compression, Journal of materials in civil engineering, 5(4) (1993) 436-446. [38] W.S. Yin, E.C.M. Su, M.A. Mansur, T.T.C. Hsu, Fiber-reinforced concrete under biaxial compression, Engineering Fracture Mechanics, 35(1) (1990) 261-268. [39] L.A. Traina, S.A. Mansour, Biaxial strength and deformational behavior of plain and steel fiber concrete, ACI Materials Journal, 88(4) (1991). [40] J. Bao, L. Wang, Q. Zhang, Y. Liang, P. Jiang, Y. Song, Combined effects of steel fiber and strain rate on the biaxial compressive behavior of concrete, Construction and Building Materials, 187 (2018) 394-405. [41] Y. Chi, L. Xu, Y. Zhang, Experimental study on hybrid fiber–reinforced concrete subjected to uniaxial compression, Journal of Materials in Civil Engineering, 26(2) (2012) 211-218. [42] W.F. Chen, D.J. Han, Plasticity for Structural Engineers, Springer New York, 2012. [43] Y. Chi, M. Yu, L. Huang, L. Xu, Finite element modeling of steel-polypropylene hybrid fiber reinforced concrete using modified concrete damaged plasticity, Engineering Structures, 148 (2017) 23-35. [44] M. Dowell, P. Jarratt, The “Pegasus” method for computing the root of an equation, BIT Numerical Mathematics, 12(4) (1972) 503-508. | ||
|
آمار تعداد مشاهده مقاله: 911 تعداد دریافت فایل اصل مقاله: 943 |
||
