مقایسه‌ی روش YPS و دستورالعمل‌های دیگر در ارزیابی عملکرد لرزه‌ای قابهای خمشی بتن آرمه منظم طراحی شده بر اساس استاندارد 2800

[1] ATC-40; Seismic Evaluation and Retrofit of Concrete Buildings; Applied Technology Council, Report No. SSC 96-01, 1996.

[2] ASCE-41-17. "ASCE Standard, ASCE/SEI, 41–17: Seismic Evaluation and Retrofit of Existing Buildings." Reston, VA: American Society of Civil Engineers, 2017.

[3] National Technical and Executive System, “Instruction for Seismic Rehabilitation of Existing Buildings”, No. 360, First Revision, Plan and Budget Organization, 2014. (In Persian)

[4] Tahouni, Sh. and Ahmadi, F., “Seismic evaluation of the reinforced concrete buildings of the Standard 2800 based on performance-based design”, Nama, 2006. (In Persian)

[5] Danesh Ashtiyani, F. and Dorvash, S., “Comparing Standard 2800 and Instruction for Seismic Rehabilitation criteria for moment frame and shear wall buildings.” 1^st International Congress on Seismic Retrofitting, Tehran, Iran, 2006. (In Persian)

[6] Tehranizadeh, M. and Pahlavani Yali, A., “Evaluation of Tall Steel Structures with Dual System (SMRF&RC Shear Wall) in Near-Field Ground Motions by Performance Based Design Method.”, Amirkabir Journal of Civil Engineering, 42(2), 85-94, 2010. (In Persian)

[7] Kheirodin, A. and Family, S.,” Seismic Evaluation of Concrete Moment Frames with Low Height Beams.” Modares Civil Engineering journal, 10(1), 2010. (In Persian)

[8] Fajfar, P., “Capacity spectrum method based on inelastic demand spectra”; The 12th WCEE Proceedings, Auckland, New Zealand, 2000.

[9] Aschheim, M., “Yield Point Spectra: A simple alternative to the capacity spectrum method”, Advanced Technology in Structural Engineering, Proceedings of Structures Congress, ASCE, 2000.

[10] FEMA-273; NEHRP Guidelines for the Seismic Rehabilitation of Buildings, Federal Emergency Management Agency, Washington, D.C., October, 1997.

[11] Aschheime, M., Black, P. “Yield point spectra for seismic design and rehabilitation”; The 12th WCEE Proceedings, Auckland, New Zealand, 2000.

[12] Aschheim, M., Montez, E., “The representation of P-∆ effects using Yield Point Spectra” ; Engineering Structures, Vol. 25, 2003, pp. 1387-1396.

[13] Naji, A; Irani, F. “P-∆ effects in steel structures using Yield Point Spectra”; Advanced Materials Research Vol 255-260, May 2011.

[14] Tjhin, T., Aschheim, M., “Yield displacement-based seismic design of RC wall buildings”; Engineering Structures, Vol. 29, 2007, pp. 2946-2959.

[15] Vamvatsikos, M., Aschheim, M., “Performance-based seismic design via yield frequency spectra”; Earthquake Engineering & Structural Dynamics, 45(11), 1759-1778 2016.

[16] Georgoussis GK., “Yield Displacements of Wall-Frame Concrete Structures and Seismic Design Based on Code Performance Objectives”, Journal of Earthquake Engineering, Oct 13:1-13, 2018.

[17] Hernández-Montes, E., and Aschheim, M.A., "A seismic design procedure for moment-frame structures." Journal of Earthquake Engineering, 23(9), 1584-1603, 2019.

[18] Zhang, Y., Shen, J. & Chen, J. Damage-based yield point spectra for sequence-type ground motions. Bulletin of Earthquake Engineering, Vol. 18, 4705–4724, 2020. https://doi.org/10.1007/s10518-020-00874-4

[19] Iranian Building Codes and Standards, Iranian Code of Practice for Seismic Resistant Design of Buildings, Standard No.2800, 4th Edition, 2014. (In Persian)

[20] Nassar, A., Krawinkler, H.,”Seismic design based on strength and ductility demand”, The 10th WCEE Proceedings, Madrid, Spain, 1992.

[21] Iranian National Building Code, Part 6th, Design Loads for Buildings, 2013. (In Persian)

[22] Iranian National Building Code, Part 9th, Design and Construction of Reinforced Concrete Buildings, 2013. (In Persian)

[23] Vidic T, Fajfar P, Fischinger M., “Consistent inelastic design spectra: strength and displacement”, Earthquake Engineering & Structural Dynamics, 23(5):507-21, May 1994.

[24] Parkash, V., Powell, GH. “DRAIN-2DX User Guide (Version 1.02) “; A Computer Program Distributed By NISEE; Department of Civil Engineering; University of California; Berkeley.