پیوندهای مفید
آمار
| تعداد نشریات | 7 |
| تعداد شماره‌ها | 399 |
| تعداد مقالات | 5,389 |
| تعداد مشاهده مقاله | 5,288,036 |
| تعداد دریافت فایل اصل مقاله | 4,882,775 |
بررسی عددی و پیش‌بینی اندازه دانه‌ها در مناطق مختلف جوشکاری اصطکاکی اغتشاشی آلیاژ آلومینیومی 6061 | ||
| نشریه مهندسی مکانیک امیرکبیر | ||
| مقاله 20، دوره 53، شماره 6، شهریور 1400، صفحه 3751-3760 اصل مقاله (967.57 K) | ||
| نوع مقاله: مقاله پژوهشی | ||
| شناسه دیجیتال (DOI): 10.22060/mej.2020.18746.6881 | ||
| نویسندگان | ||
| امیر غیاثوند1؛ مهدی کاظمی* 2؛ مازیار مهدی پور جلیلیان3 | ||
| 1فارغ التحصیل دانشگاه تبریز | ||
| 2عضو هیئت علمی دانشگاه ملایر | ||
| 3عضو هیئت علمی دانشگاه ازاد کرمانشاه | ||
| چکیده | ||
| جوشکاری اصطکاکی اغتشاشی یک تکنیک اتصال حالت جامد می‌باشد که بر اساس دو عامل فشار بزرگ‌تر از تسلیم و تغییر شکل‌های بزرگ پلاستیک اتصال نهایی بین قطعات در هندسه‌های جوش متفاوت صورت می‌پذیرد. اندازه دانه‌هادر مناطق جوش مبتنی بر سه رویداد ریکاوری، تبلور مجدد و رشد دانه‌ها می‌باشد که بر اساس میزان پیشرفت هر کدام از این مراحل، اندازه ذرات نهایی حاصل می‌گردد. در پژوهش حاضر با استفاده از روشی تحلیلی-عددی بر پایه شبیه‌سازی عددی فرایند جوشکاری اصطکاکی اغتشاشی آلیاژ آلومینیم 6061 اندازه ذرات نهایی در نواحی مختلف جوش پیش‌بینی شده است. شبیه‌سازی اجزاء محدود فرایند به واسطه نرم‌افزار آباکوس و با رویکرد کوپل اویلر لاگرانژی صورت پذیرفت. به منظور صحه‌سنجی، نتایج حاصل از مدل نوین با نتایج تجربی مورد مقایسه قرار گرفت، نتایج در مطابقت مناسبی با نتایج تجربی قرار داشت. با توجه به تمرکز حرارت و جریان پلاستیک در منطقه مرکزی جوش، منطقه اغتشاش بیشترین تغییرات ریزساختاری را داشت و میزان اندازه دانه‌ها در این ناحیه دچار کاهش شدیدتری نسبت به سایر مناطق مختلف جوش گردید. بررسی تفاوت اندازه دانه‌ها در دو ناحیه پیش‌رو و پس‌رو نیز مورد مطالعه قرار گرفت و تفاوت مشهودی در اندازه ذرات در این دو ناحیه مشاهده شد. | ||
| کلیدواژه‌ها | ||
| جوشکاری اصطکاکی اغتشاشی؛ اندازه دانه؛ اجزاء محدود؛ مناطق جوش؛ آلیاژ آلومینیوم | ||
| عنوان مقاله [English] | ||
| Numerical investigation and prediction of grain size in different friction stir welding areas of AA6061 aluminum alloy | ||
| نویسندگان [English] | ||
| Amir Ghiasvand1؛ Mahdi Kazemi2؛ Maziar Mahdipour Jalilian3 | ||
| 1Tabriz university | ||
| 3Mechanical Engineering Department, Kermanshah Branch, Islamic Azad University, Kermanshah, Iran | ||
| چکیده [English] | ||
| Friction stir welding is a solid-state bonding technique based on two factors, a pressure greater than the material yield stress and large plastic deformation. The final joint between parts takes place in different welding geometries by using these two factors. The grain sizes in the weld areas are influenced by recovery, recrystallization, and grain growth. In the current research, using an analytical-numerical method based on finite element simulation of friction stir welding of AA6061-T6 alloy, the grain sizes in various welded areas have been predicted. The finite element simulation has been performed based on the coupled Eulerian-Lagrangian approach using ABAQUS software and the results have been verified by experiments. The predicted results were in good agreement with the experimental results. Due to the concentration of heat and plastic flow in the central region of the weld, the stirring region had the most microstructural changes and the grain size in this region decreased more sharply than other different areas of the weld. As the rotational welding speed increases, recrystallization phenomena in the central weld area increases. With increasing the translational welding speed, grain size increased in different welding areas. This increase occurred more severely in the central area of the welded joint. | ||
| کلیدواژه‌ها [English] | ||
| Friction stir welding, Grain size, Finite element, Weld zones, Aluminum alloy | ||
|
سایر فایل های مرتبط با مقاله
|
||
| مراجع | ||
|
[1] M.M. Hasan, M. Ishak, M. Rejab, Influence of machine variables and tool profile on the tensile strength of dissimilar AA7075-AA6061 friction stir welds, The International Journal of Advanced Manufacturing Technology, 90(9-12) (2017) 2605-2615. [2] S.S. Kumar, N. Murugan, K. Ramachandran, Effect of tool tilt angle on weld joint properties of friction stir welded AISI 316L stainless steel sheets, Measurement, 150 (2020) 107083. [3] A. Garg, M. Raturi, A. Bhattacharya, Influence of additional heating in friction stir welding of dissimilar aluminum alloys with different tool pin profiles, The International Journal of Advanced Manufacturing Technology, 105(1-4) (2019) 155-175. [4] M.-K. Besharati-Givi, P. Asadi, Advances in friction-stir welding and processing, Elsevier, 2014. [5] R.S. Mishra, P.S. De, N. Kumar, Friction stir welding and processing: science and engineering, Springer, 2014. [6] H.J. Aval, S. Serajzadeh, A. Kokabi, Evolution of microstructures and mechanical properties in similar and dissimilar friction stir welding of AA5086 and AA6061, Materials Science and Engineering: A, 528(28) (2011) 8071-8083. [7] A. Ghiasvand, M. Kazemi, M.M. Jalilian, H.A. Rashid, Effects of tool offset, pin offset, and alloys position on maximum temperature in dissimilar FSW of AA6061 and AA5086, International Journal of Mechanical and Materials Engineering, 15(1) (2020) 1-14. [8] M. Tamjidy, B. Baharudin, S. Paslar, K. Matori, S. Sulaiman, F. Fadaeifard, Multi-objective optimization of friction stir welding process parameters of AA6061-T6 and AA7075-T6 using a biogeography based optimization algorithm, Materials, 10(5) (2017) 533. [9] V. Pandian, S. Kannan, Numerical prediction and experimental investigation of aerospace-grade dissimilar aluminium alloy by friction stir welding, Journal of Manufacturing Processes, 54 (2020) 99-108. [10] H. Schmidt, J. Hattel, J. Wert, An analytical model for the heat generation in friction stir welding, Modelling and Simulation in Materials Science and Engineering, 12(1) (2003) 143. [11] B. Meyghani, M. Awang, S.S. Emamian, M. Nor, M. Khalid, S.R. Pedapati, A comparison of different finite element methods in the thermal analysis of Friction Stir Welding (FSW), Metals, 7(10) (2017) 450. [12] Z. Zhao, H. Liang, Y. Zhao, K. Yan, Effect of Exchanging Advancing and Retreating Side Materials on Mechanical Properties and Electrochemical Corrosion Resistance of Dissimilar 6013-T4 and 7003 Aluminum Alloys FSW Joints, Journal of Materials Engineering and Performance, 27(4) (2018) 1777-1783. [13] Y.J. Chao, X. Qi, W. Tang, Heat transfer in friction stir welding—experimental and numerical studies, Journal of manufacturing science and engineering, 125(1) (2003) 138-145. [14] M. Song, R. Kovacevic, Thermal modeling of friction stir welding in a moving coordinate system and its validation, International Journal of Machine Tools and Manufacture, 43(6) (2003) 605-615. [15] A. Ghiasvand, S. Hassanifard, Numerical simulation of FSW and FSSW with pinless tool of AA6061-T6 Al alloy by CEL approach, Journal of Solid and Fluid Mechanics, 8(3) (2018) 65-75. [16] R. Nandan, G. Roy, T. Lienert, T. Debroy, Three-dimensional heat and material flow during friction stir welding of mild steel, Acta materialia, 55(3) (2007) 883-895. [17] D.K. Yaduwanshi, S. Bag, S. Pal, Heat transfer analyses in friction stir welding of aluminium alloy, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229(10) (2015) 1722-1733. [18] F. Al-Badour, N. Merah, A. Shuaib, A. Bazoune, Thermo-mechanical finite element model of friction stir welding of dissimilar alloys, The International Journal of Advanced Manufacturing Technology, 72(5-8) (2014) 607-617. [19] M.A. Ansari, A. Samanta, R.A. Behnagh, H. Ding, An efficient coupled Eulerian-Lagrangian finite element model for friction stir processing, The International Journal of Advanced Manufacturing Technology, 101(5-8) (2019) 1495-1508. [20] M. Eskandari, H.J. Aval, R. Jamaati, The study of thermomechanical and microstructural issues in dissimilar FSW of AA6061 wrought and A390 cast alloys, Journal of Manufacturing Processes, 41 (2019) 168-176. [21] Y. Wu, J. Yu, Z. Yang, Y. Deng, Study of grain distribution during friction stir welding of Al-Zn-Mg alloys using numerical simulation, in: IOP Conference Series: Materials Science and Engineering, IOP Publishing, 2019, pp. 012022. [22] W. Woo, L. Balogh, T. Ungár, H. Choo, Z. Feng, Grain structure and dislocation density measurements in a friction-stir welded aluminum alloy using X-ray peak profile analysis, Materials Science and Engineering: A, 498(1-2) (2008) 308-313. [23] G. Kerrar, N. Merah, A.N. Shuaib, A.-B. Fadi, A. Bazoune, Experimental and numerical investigations of friction stir welding of aluminum to copper, in: Applied Mechanics, Behavior of Materials, and Engineering Systems, Springer, 2017, pp. 129-138. [24] G.R. Johnson, W.H. Cook, Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures, Engineering fracture mechanics, 21(1) (1985) 31-48. [25] A. Ghiasvand, S. Hassanifard, Numerical Simulation of Laser Welding and Evaluation of Residual Stress and Temperature Distribution in Lap Joint of AA6061 and AA5086 Aluminum Alloys in Different Thicknesses, Amirkabir Journal of Mechanical Engineering, 52(3) (2019) 41-50. [26] N. Dialami, M. Chiumenti, M. Cervera, A. Segatori, W. Osikowicz, Enhanced friction model for Friction Stir Welding (FSW) analysis: Simulation and experimental validation, International Journal of Mechanical Sciences, 133 (2017) 555-567. [27] S.B. Aziz, M.W. Dewan, D.J. Huggett, M.A. Wahab, A.M. Okeil, T.W. Liao, Impact of Friction Stir Welding (FSW) process parameters on thermal modeling and heat generation of aluminum alloy joints, Acta Metallurgica Sinica (English Letters), 29(9) (2016) 869-883. [28] G. Buffa, L. Fratini, R. Shivpuri, CDRX modelling in friction stir welding of AA7075-T6 aluminum alloy: Analytical approaches, Journal of Materials Processing Technology, 191(1-3) (2007) 356-359. [29] F. Al-Badour, N. Merah, A. Shuaib, A. Bazoune, Coupled Eulerian Lagrangian finite element modeling of friction stir welding processes, Journal of Materials Processing Technology, 213(8) (2013) 1433-1439. | ||
|
آمار تعداد مشاهده مقاله: 716 تعداد دریافت فایل اصل مقاله: 871 |
||
