|
[1]
|
P. Beaumont, The failure of fiber composites: An overview, J Strain Anal, 24 (1989) 189-205.
|
|
[2]
|
M. Waddoups, J.R. Eisenman, B. Kaminski, Macroscopic fracture mechanics of advanced composite materials, J Compos Mater, 5 (1971) 446-451.
|
|
[3]
|
J. H. Zhao, X. F. Wang, L. R. Dhrani, Notch stress concentrations and failure characteristics in laminates with triple parallel notches, Compos Sci and Tech, 60 (2000) 2865-2872.
|
|
[4]
|
J. Awerbuch, H. Hahn, Crack-tip damage and fracture toughness of boron/aluminum composites, J Compos Mater, 13 (1979) 82-107.
|
|
[5]
|
J. Lee, C. Soutis, Measuring the notched compressive strength of composite laminates: Specimen size effects, Compos Sci and Tech, 68 (2008) 2359–2366.
|
|
[6]
|
V. Rizov, Mixed mode fracture study of polymer composites using single edge notched bend specimens, Comput Mater Sci, 77 (2013) 1-6.
|
|
[7]
|
L. Bokwon, V. Sankar, Lay-up independent fracture criterion for notched laminated composites, Compos Sci and Tech, 66 (2006) 2491-2499.
|
|
[8]
|
J. Whitney, R. Nuismer, Stress fracture criteria for laminated composites containing stress concentration, J Compos Mater, 8 (1974) 253-265.
|
|
[9]
|
S.C. Tan, Notched strength prediction and design of laminated composites under in-plane loadings, J Compos Mater, 21 (1987) 925-948.
|
|
[10]
|
S.C. Tan, Laminated composites containing an elliptical opening-II. experiment and model modification, J Compos Mater, 21 (1987) 949-968.
|
|
[11]
|
R.B. Pipes, Wetherhold RC, Gillespie JW. Macroscopic fracture of fibrous composites, Mater Sci Eng, 45 (1980) 247-253.
|
|
[12]
|
J.K. Kim, D.S. Kim, N. Takeda, Notched strength and effective crack growth in woven fabric laminates, J Compos Mater, 29 (1995) 982-998.
|
|
[13]
|
J. Backlund, C.G. Aronsson, Tensile Fracture of Laminates with Holes and Cracks, J Compos Mater, 20 (1986) 259-285.
|
|
[14]
|
C.G. Aronsson, J. Backlund, Tensile fracture of laminates with cracks, J Compos Mater, 20 (1986) 287-307.
|
|
[15]
|
B.N. Nguyen, Three-dimensional modeling of damage in laminated composites containing a central hole, J Compos Mater, 31 (1997) 1672-1693.
|
|
[16]
|
G. Lawcock, L. Ye, Y. Mai, Progressive damage and residual strength of a carbon fiber reinforced metal laminate, J Compos Mater, 31 (1997) 762-787.
|
|
[17]
|
A. Afaghi-Khatibi, L. Ye, Y. Mai, An effective crack growth model for residual strength evaluation of composite laminates with circular holes, J Compos Mater, 30 (1996) 142-163.
|
|
[18]
|
N.K. Naik, P.S. Shembekar, M.K. Verma, On the influence of stacking sequence on the notch sensitivity of fabric laminates, J Compos Mater, 24 (1990) 838–52.
|
|
[19]
|
I. Eriksson, C.G. Aronsson, Strength of tensile loaded graphite/epoxy laminates containing cracks, open and filled holes, J Compos Mater, 24 (1990) 456-482.
|
|
[20]
|
C.J. Liu, A.H. Nijhof, L.J. Ernst, R. Marissen, A new ultimate strength model of notched composite laminates – including the effects of matrix failure. J Compos Mater, 44 (2010) 1335–49.
|
|
[21]
|
P. Ladeveze, A damage computational method for composite structures, Comput Struct, 44 (1992) 79-87.
|
|
[22]
|
B. Mohammadi, H. Hosseini-Toudeshky, M.H. Sadr-Lahidjani, Damage evolution of laminated composites using continuum damage mechanics incorporate with interface element, Key Eng Mater, 385 (2008) 277-280.
|
|
[23]
|
B. Mohammadi, H. Hosseini-Toudeshk, M.H. Sadr-Lahidjan, S. Aivazzadeh, Prediction of inelastic behavior of composite laminates using multi-surface continuum damage-plasticity, Adv Mater Res, 47 (2008) 773-776.
|
|
[24]
|
B. Mohammadi, A. Kazemi, R. Ghasemi, Damage analysis of holed composite laminates using continuum damage mechanics, (In Persian), Journal of Science and Technology of Composites, 2 (2015) 23-34.
|
|
[25]
|
L. Feng, X, Qian, Rapid S-N type life estimation for low sycle fatigue of high-strength steels at a low ambient temperature, Steel and Compos struct, 33 (2019) 777-792.
|
|
[26]
|
E. Satria, S.H. Kato, S.H. Nakasawa, Study on dynamic behavior of a new type of two-way single layer lattice dome with nodal eccentricity, Steel and Compos Struct, 8 (2008) 6-12.
|
|
[27]
|
F.J. Gómez, M. Elices, A. Valiente, Cracking in PMMA containing U‐shaped notches, Fatigue Fract Eng Mater Struct, 23 (2000) 795-803.
|
|
[28]
|
F.J. Gómez, M. Elices, A fracture criterion for sharp V-notched samples, Int J Fract, 123 (2003) 163-75.
|
|
[29]
|
F.J. Gómez, M. Elices, J. Planas, The cohesive crack concept: application to PMMA at -60 (deg.), Eng Fract Mech, 72 (2005) 1268-85.
|
|
[30]
|
Z. Yosibash, A. Bussiba, I. Gilad, Failure criteria for brittle elastic materials, Int J Fract, 125 (2004) 307-33.
|
|
[31]
|
F. Erdogan, G. Sih, On the crack extension in plates under plane loading and transverse shear, J Basic Eng Trans, 85 (1963) 528-534.
|
|
[32]
|
F. Berto, P. Lazzarin, F.J. Gomez, Elices M. Fracture assessment of U-notches under mixed mode loading: two procedures based on the equivalent local mode I concept, Int J Fract, 148 (2007) 415-433.
|
|
[33]
|
M.R. Ayatollahi, A.R. Torabi, A criterion for brittle fracture in U-notched components under mixed-mode loading, Eng Fract Mech, 76 (2009) 1883-96.
|
|
[34]
|
A.R. Torabi, Fracture assessment of U-notched graphite plates under tension, Int J Fract, 81 (2013) 285-292.
|
|
[35]
|
A.R. Torabi, M. Fakoor, E. Pirhadi, Tensile fracture in coarse-grained polycrystalline graphite weakened by a U-shaped notch, Eng Fract Mech, 111 (2013) 77-85.
|
|
[36]
|
A.R. Torabi, E. Pirhadi, Notch failure in laminated composites under opening mode, Compos Part B, 172, (2019) 61-75.
|
|
[37]
|
A.R. Torabi, E. Pirhadi, On the ability of fracture mechanics in predicting the last-ply-failure of blunt V-notch laminated composite specimens: A hard problem can be easily solved by conventional methods, Eng Fract Mech, 217 (2019) 106534.
|
|
[38]
|
A.R. Torabi, E. Pirhadi, Extension of the virtual isotropic material concept to mixed mode loading for predicting the last-ply-failure of U-notched glass/epoxy laminated composite specimens, Composite Part B, 176 (2019) 106537.
|
|
[39]
|
M.J. Laffan, S.T. Pinho, P. Robinson, L. Iannucci, Measurement of the in situ ply fracture toughness associated with mode I fibre tensile failure in FRP. Part I: data reduction, Compos Sci and Tech, 70 (2010) 606–613.
|
|
[40]
|
J.H. Underwood, M.T. Kortschot, Notch-tip Damage and Translaminar Fracture Toughness Measurements from Carbon/Epoxy Laminates, US Army Armament Research, Development and EngineeringCentre, Technical Report ARCCB-TR-94010, (1994) 94010.
|
|
[41]
|
S.T. Pinho, P. Robinson, L. Iannucci, Fracture toughness of the tensile and compressive fibre failure modes in laminated composites, Compos Sci and Tech, 66 (2006) 2069–2079.
|
|
[42]
|
J.H. Underwood, M.T. Kortschot, W.R. Lloyd, H.L. Eidinoff, D.A. Wilson, N. Ashbaugh, Translaminar Fracture Toughness Test Methods and Results from Interlaboratory Tests of Carbon/epoxy Laminates, Fract Mech, 26 (1995) ASTM STP 1256.
|
|
[43]
|
Y.T. Yeow, D.H. Morris, H.F. Brinson, A correlative study between analysis and experiment on the fracture behavior of graphite/epoxy composites, J Test and Eval, 7 (1979) 117–125.
|
|
[44]
|
R. El-Hajjar, R. Haj-Ali, Mode-I fracture toughness testing of thick section FRP composites using the ESE(T) specimen, Eng Fract Mech, 72 (2005) 631–643.
|
|
[45]
|
C. Soutis, P.T. Curtis, N.A. Fleck, Compressive failure of notched carbon fibre composites, Proceedings of the Royal Society, 440 (1993) 241–256.
|
|
[46]
|
C.G. Sih, P.C. Paris, G.R. Irwin, On cracks in rectilinearly anisotropic bodies, International Journal of Fracture Mechanics, 1(3) (1965) 189–203.
|
|
[47]
|
Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials. Annual Book of ASTM Standard, D3039/D3039M.
|
|
[48]
|
Standard Test Method for Trans-laminar Fracture Toughness of Laminated Polymer Matrix Composite Materials. Annual Book of ASTM Standard, E1922-04.
|
|
[49]
|
R.O. Ritchie, J.F. Knott, J.R. Rice, On the relationship between critical stress and fracture toughness in mild steel, J Mech Phys Solids, 21 (1973) 395-410.
|
|
[50]
|
D. Taylor, Predicting the fracture strength of ceramic materials using the theory of critical distances, Eng Fract Mech, 71 (2004) 2407-2416.
|
|
[51]
|
K. Wieghard, U. Spalten, ZerreißenelastischerKorper Z. Math Phys 1907;55:60-103 Translated by Rossmanith HP, Fatigue Fract Eng Mater Struct, 18, (1995) 1371-1405.
|
|
[52]
|
M.R. Ayatollahi, A.R. Torabi, Brittle fracture in rounded-tip V-shaped notches, Mater Design, 31 (2010) 60-7.
|
|
