![سامانه مدیریت نشریات علمی دانشگاه صنعتی امیرکبیر](./data/logo.png)
تعداد نشریات | 7 |
تعداد شمارهها | 399 |
تعداد مقالات | 5,389 |
تعداد مشاهده مقاله | 5,288,041 |
تعداد دریافت فایل اصل مقاله | 4,882,776 |
بررسی انرژی و اگزرژی سیکل رنکین آلی تغذیهشده با حرارت بازیافتی کوره قوس الکتریکی | ||
نشریه مهندسی مکانیک امیرکبیر | ||
مقاله 14، دوره 53، شماره 9، آذر 1400، صفحه 4999-5016 اصل مقاله (1.1 M) | ||
نوع مقاله: مقاله پژوهشی | ||
شناسه دیجیتال (DOI): 10.22060/mej.2021.19184.6970 | ||
نویسندگان | ||
آیدا ارومیه ای1؛ مهران عامری* 2؛ محمد حسن نوبختی3؛ مسعود زارع3؛ سعید عدالتی4 | ||
1مهندسی مکانیک، دانشکده مکانیک،دانشگاه آزاد اسلامی واحد علوم تحقیقات، تهران، ایران | ||
2دانشکده مهندسی مکانیک، دانشگاه شهید باهنر کرمان، کرمان، ایران | ||
3دانشکده مهندسی مکانیک، دانشگاه آزاد واحد علوم تحقیقات، تهران، ایران | ||
4مدیر مهندسی و توسعه، شرکت فولاد بوتیای ایرانیان | ||
چکیده | ||
یکی از فرآیندهای موردتوجه جهت تبدیل گرمای اتلافی به توان، استفاده از حرارت اتلافی گازهای خروجی از کوره قوس الکتریکی است، که نوسانهای زیادی از دو جهت درجه حرارت و نرخ جریان دارند. در این مطالعه ترکیب سیکل رنکین آلی با سیستم بازیافت حرارت جهت بازیافت حرارت گازهای دما پایین کوره قوس الکتریکی موردبررسی قرار گرفته است. اثر جمع کننده بخار بر روی کاهش نوسانات توان حرارتی خروجی از بویلر بازیافت حرارتی، نشان داده شده است. مدل ترمودینامیکی جمع کننده بخار، بر اساس مدل عدم تعادل حرارتی بین فاز مایع و بخار، شبیهسازی شده است. تغییرات فشار داخل جمع کننده بخار با دبیهای جرمی مختلف بخار خروجی از آن بررسی شده است. با دبی خروجی 2/84 کیلوگرم بر ثانیه از جمع کننده توان حرارتی ثابت و پیوستهای در مدت چهار فرآیند شبیهسازی شده از کوره قوس الکتریکی در دسترس است. سیستم بازیافت حرارت و سیکل رنکین آلی از دیدگاه انرژی و اگزرژی در حالت گذرا مورد مطالعه قرار گرفتهاند. بازده انرژی و اگزرژی کل سیستم با سه سیال عامل امام، تلوئن و آر245افآ سیکل رنکین آلی محاسبه شده است. سیال تلوئن با بازده حرارتی و اگزرژی به ترتیب 16/4 و 27/1 درصد نسبت به دو سیال عامل دیگر گزینه مناسبی جهت استفاده در سیکل رنکین آلی است. | ||
کلیدواژهها | ||
بازیافت حرارت اتلافی؛ سیکل رنکین آلی؛ کوره قوس الکتریکی؛ جمع کننده بخار؛ اگزرژی | ||
عنوان مقاله [English] | ||
Energy and Exergy Analysis of Organic Rankine Cycle Fed by Electric Arc Furnace Waste Heat | ||
نویسندگان [English] | ||
Aida Orumiyeh-e1؛ Mehran Ameri2؛ mohammad hasan nobakhti3؛ Masud Zareh3؛ Saeed Edalati4 | ||
1Department of mechanical engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran | ||
2Department of Mechanical Engineering, Shahid Bahonar University of Kerman, Kerman, Iran | ||
3Faculty of Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran | ||
4Director in department of Engineering and Research and Development at Butia Iranian Steel Co | ||
چکیده [English] | ||
In this study, the hybrid of organic Rankine cycle with heat recovery system of low temperature gases in Electric Arc furnace has been investigated. Moreover, the effect of the steam accumulator on stabilizing the mass and heat of exhaust gases of the heat recovery boiler is shown. Hence, constant thermal power has been achieved for a longer period of time for the organic Ranking cycle. The steam accumulator thermodynamic model is simulated based on the non - equilibrium thermal model for the liquid and vapor phases. Furthermore, the steam accumulator pressure variations with different mass outflow rates have been investigated. Constant and continuous thermal power has been reached with an output mass flow rate of 2.84 kg/s during four processes of the electric arc furnace. The transient state of the aforementioned hybrid system has been studied from the energy and exergy points of view. The energy and exergy efficiencies of the whole system are calculated with three working fluids Hexamethyldisiloxane, Toluene, and R245fa of the organic Ranking cycle. Toluene with thermal and exergy efficiencies of 16.4% and 27.1%, respectively, is suitable for use in the organic Ranking cycle compared with the other two fluids. | ||
کلیدواژهها [English] | ||
Waste heat recovery, Organic Rankine cycle, Electric arc furnace, Steam accumulator, Exergy | ||
سایر فایل های مرتبط با مقاله
|
||
مراجع | ||
[1] M. Jiménez-Arreola, R. Pili, F. Dal Magro, C. Wieland, S. Rajoo, A. Romagnoli, Thermal power fluctuations in waste heat to power systems: An overview on the challenges and current solutions, Applied Thermal Engineering, 134 (2018) 576-584. [2] M. Abutayeh, Modeling Dual–Tank Molten Salt Thermal Energy Storage Systems, in: ASME International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers, 2014, pp. V06BT07A045. [3] V.D. Stevanovic, B. Maslovaric, S. Prica, Dynamics of steam accumulation, Applied Thermal Engineering, 37 (2012) 73-79. [4] V.D. Stevanovic, M.M. Petrovic, S. Milivojevic, B. Maslovaric, Prediction and control of steam accumulation, Heat Transfer Engineering, 36(5) (2015) 498-510. [5] V.S.P. Raphael, R. Velraj, P. Jalihal, Transient analysis of steam accumulator integrated with solar based MED-TVC system, Desalination, 435 (2018) 3-22. [6] I. Ortega-Fernández, J. Rodríguez-Aseguinolaza, Thermal energy storage for waste heat recovery in the steelworks: The case study of the REslag project, Applied Energy, 237 (2019) 708-719. [7] K. Couvreur, W. Beyne, M. De Paepe, S. Lecompte, Hot water storage for increased electricity production with organic Rankine cycle from intermittent residual heat sources in the steel industry, Energy, (2020) 117501. [8] M. Yamazaki, Y. Sato, R. Seki, Hyrid Way EAF Off Gas Heat Recovery-ECORECS, SEAISI Quarterly(South East Asia Iron and Steel Institute), 41(2) (2012) 56-59. [9] A. Hoffmann, U. Hampel, R. Pitz-Paal, Numerical and Experimental Investigation of Transient Two-phase Flow Phenomena in Concentrated Solar Power Plants with Direct Steam Generation, Lehrstuhl für Solartechnik (DLR), 2017. [10] A. Naeimi, M. Bidi, M.H. Ahmadi, R. Kumar, M. Sadeghzadeh, M.A. Nazari, Design and exergy analysis of waste heat recovery system and gas engine for power generation in Tehran cement factory, Thermal Science and Engineering Progress, 9 (2019) 299-307. [11] A. Stoppato, A. Benato, Life Cycle Assessment of a Commercially Available Organic Rankine Cycle Unit Coupled with a Biomass Boiler, Energies, 13(7) (2020) 1835. [12] S. Lecompte, H. Huisseune, M. van den Broek, M. De Paepe, Methodical thermodynamic analysis and regression models of organic Rankine cycle architectures for waste heat recovery, Energy, 87 (2015) 60-76. [13] S. Lecompte, H. Huisseune, M. Van den Broek, S. De Schampheleire, M. De Paepe, Part load based thermo-economic optimization of the Organic Rankine Cycle (ORC) applied to a combined heat and power (CHP) system, Applied Energy, 111 (2013) 871-881. [14] M. Ramirez, M. Epelde, M.G. de Arteche, A. Panizza, A. Hammerschmid, M. Baresi, N. Monti, Performance evaluation of an ORC unit integrated to a waste heat recovery system in a steel mill, Energy procedia, 129 (2017) 535-542. [15] A. Foresti, D. Archetti, R. Vescovo, ORCs in steel and metal making industries: lessons from operating experience and next steps, METEC & 2nd ESTAD, (2015). [16] F. Campana, M. Bianchi, L. Branchini, A. De Pascale, A. Peretto, M. Baresi, A. Fermi, N. Rossetti, R. Vescovo, ORC waste heat recovery in European energy intensive industries: Energy and GHG savings, Energy Conversion and Management, 76 (2013) 244-252. [17] Ö. Kaşka, Energy and exergy analysis of an organic Rankine for power generation from waste heat recovery in steel industry, Energy Conversion and Management, 77 (2014) 108-117. [18] G. Xu, G. Song, X. Zhu, W. Gao, H. Li, Y. Quan, Performance evaluation of a direct vapor generation supercritical ORC system driven by linear Fresnel reflector solar concentrator, Applied Thermal Engineering, 80 (2015) 196-204. [19] M. Wang, J. Wang, Y. Zhao, P. Zhao, Y. Dai, Thermodynamic analysis and optimization of a solar-driven regenerative organic Rankine cycle (ORC) based on flat-plate solar collectors, Applied Thermal Engineering, 50(1) (2013) 816-825. [20] C. Brandt, N. Schüler, M. Gaderer, J.M. Kuckelkorn, Development of a thermal oil operated waste heat exchanger within the off-gas of an electric arc furnace at steel mills, Applied thermal engineering, 66(1-2) (2014) 335-345. [21] R. Pili, A. Romagnoli, H. Spliethoff, C. Wieland, Techno-economic analysis of waste heat recovery with ORC from fluctuating industrial sources, Energy procedia, 129 (2017) 503-510. [22] V. Wylen, G. John, Fundamentals of thermodynamics, in, india, 2002. [23] R.E. Sonntag, C. Borgnakke, G.J. Van Wylen, S. Van Wyk, Fundamentals of thermodynamics, Wiley New York, 1998. [24] O. ToolboxTM, MATLAB computer software in version R2016a, The Mathworks Inc, (2016). [25] I.H. Bell, S. Quoilin, J. Wronski, V. Lemort, Coolprop: An open-source reference-quality thermophysical property library, in: ASME ORC 2nd International Seminar on ORC Power Systems, 2013. | ||
آمار تعداد مشاهده مقاله: 627 تعداد دریافت فایل اصل مقاله: 896 |