بررسی تجربی و تئوری چقرمگی شکست مود 2 خالص برای قطعات نرم ترک‌دار با کرنش- سختی بالا

[1] R. Hojjati-Talemi, S. Cooreman, D. Van Hoecke, Finite element simulation of dynamic brittle fracture in pipeline steel: A XFEM-based cohesive zone approach, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 232(5) (2018) 357-370.

[2] O. Zvirko, N. Kret, O. Tsyrulnyk, T. Vengrynyuk, Influence of textures of pipeline steels after operation on their brittle fracture resistance, Materials Science, 54(3) (2018) 400-405.

[3] W. Li, Z. Jin, G. Cusatis, Size effect analysis for the characterization of marcellus shale quasi-brittle fracture properties, Rock Mechanics and Rock Engineering, 52(1) (2019) 1-18.

[4] S. Chandra, R. Sarkar, A. Bhowmick, P. De, P. Chakraborti, S. Ray, Crack tip opening angle (CTOA) and δ5 measurements on SENT and DENT specimens of a thin interstitial-free steel sheet, Engineering Fracture Mechanics, 225 (2020),  https://doi.org/10.1016/j.engfracmech.2019.106861.

[5] P. Kuhn, G. Catalanotti, J. Xavier, P. Camanho, H. Koerber, Fracture toughness and crack resistance curves for fiber compressive failure mode in polymer composites under high rate loading, Composite Structures, 182 (2017) 164-175.

[6] J.R. Rice, A path independent integral and the approximate analysis of strain concentration by notches and cracks, Journal of Applied Mechanics, 35(2) (1968) 379-386.

[7] J. Ding, W. Xu, Determination of mode I interlaminar fracture toughness of composite by a wedge-insert double cantilever beam and the nonlinear J integral, Composites Science and Technology, 206 (2021), https://doi.org/10.1016/j.compscitech.2021.108674.

[8] Y. Wang, G. Wang, S. Tu, F. Xuan, Ductile fracture prediction based on J-integral and unified constraint parameters for cracked pipes, Engineering Fracture Mechanics, 215 (2019) 1-15.

[9] F. Antunes, R. Branco, P. Prates, L. Borrego, Fatigue crack growth modelling based on CTOD for the 7050‐T6 alloy, Fatigue & Fracture of Engineering Materials & Structures, 40(8) (2017) 1309-1320.

[10] K. Samadian, S. Hertelé, W. De Waele, Measurement of CTOD along a surface crack by means of digital image correlation, Engineering Fracture Mechanics, 205 (2019) 470-485.

[11] Y. Zhang, J. Shuai, Z. Lv, K. Xu, Investigation of the effects of material parameters on the relationship between crack tip constraint and CTOD fracture toughness, Theoretical and Applied Fracture Mechanics, 108 (2020), https://doi.org/10.1016/j.tafmec.2020.102615.

[12] J.S. Kim, N.O. Larrosa, A.J. Horn, Y.J. Kim, R.A. Ainsworth, Notch bluntness effects on fracture toughness of a modified S690 steel at 150° C, Engineering Fracture Mechanics, 188 (2018) 250-267.

[13] W. Musraty, B. Medjo, N. Gubeljak, A. Likeb, I. Cvijović-Alagić, A. Sedmak, M. Rakin, Ductile fracture of pipe-ring notched bend specimens–Micromechanical analysis, Engineering Fracture Mechanics, 175 (2017) 247-261.

[14] Ł. Derpeński, Ductile fracture behavior of notched aluminum alloy specimens under complex non-proportional load, Materials, 12(10) (2019), https://doi.org/10.3390/ma12101598.

[15] J. Pan, Y. Wang, Y. Li, Ductile fracture in notched bulk metallic glasses, Acta Materialia, 136 (2017) 126-133.

[16] V.Madrazo, S.Cicero, I.A.Carrascal, On the point method and the line method notch effect predictions in Al7075-T651, Engineering Fracture Mechanics, 79 (2012) 363-379.

[17] W.Q. Wang, A.J. Li, P.N. Li, D.Y. Ju, An engineering approach for notch elastic-plastic fracture analysis, International Journal of Pressure Vessels and Piping, 60(1) (1994) 1-16.

[18] H.Neuber, Theory of stress concentration for shear-strained prismatical bodies with arbitrary nonlinear stress-strain law, Journal of Applied Mechanics, 28(4) (1961) 544-550.

[19] K.Molski, G.Glinka, A method of elastic-plastic stress and strain calculation at a notch root, Materials Science and Engineering, 50(1) (1981) 93-100.

[20] G.Glinka, Energy density approach to calculation of inelastic strain-stress near notches and cracks, Engineering Fracture Mechanics, 22(3) (1985) 485-508.

[21] P.Lazzarin, R.Zambardi, The equivalent strain energy density approach re‐formulated and applied to sharp V‐shaped notches under localized and generalized plasticity, Fatigue & Fracture of Engineering Materials & Structures, 25(10) (2002) 917-928.

[22] A.R.Torabi, Estimation of tensile load-bearing capacity of ductile metallic materials weakened by a V-notch: The equivalent material concept, Materials Science and Engineering: A, 536 (2012) 249-255.

[23] H.R.Majidi, S.M.J.Razavi, A.R.Torabi, Application of EMC‐J criterion to fracture prediction of U‐notched polymeric specimens with nonlinear behaviour, Fatigue & Fracture of Engineering Materials & Structures, 42(1) (2019) 352-362.

[24] A.R.Torabi, M.Alaei, Application of the equivalent material concept to ductile failure prediction of blunt V-notches encountering moderate-scale yielding, International Journal of Damage Mechanics, 25(6) (2016) 853-877.

[25] A.R.Torabi, A.S.Rahimi, M.R.Ayatollahi, Mixed mode І/ІІ fracture prediction of blunt V-notched nanocomposite specimens with nonlinear behavior by means of the Equivalent Material Concept, Composites Part B: Engineering, 154 (2018) 363-373.

[26] A.R.Torabi, R.Habibi, B.M.Hosseini, On the ability of the equivalent material concept in predicting ductile failure of U-notches under moderate-and large-scale yielding conditions, Physical Mesomechanics, 18(4) (2015) 337-347.

[27] H.Salavati, H.Mohammadi, Ductile Failure Prediction of U-Notched Bainitic Functionally Graded Steel Specimens Using the Equivalent Material Concept Combined with the Averaged Strain Energy Density Criterion, Physical Mesomechanics, 22(3) (2019) 255-260.

[28] A.R.Torabi, The equivalent material concept: Application to failure of O-notches, Engineering Solid Mechanics, 1(4) (2013) 129-140.

[29] A.R.Torabi, M.R.Ayatollahi, M.Torabi, A.S.Rahimi, Crack growth onset in thin aluminum sheets under mixed mode I/II loading: A new form of the Equivalent Material Concept, Thin-Walled Structures, 144 (2019), https://doi.org/10.1016/j.tws.2019.106337.

[30] A.R. Torabi, M. Kamyab, Notch ductile failure with significant strain‐hardening: The modified equivalent material concept, Fatigue & Fracture of Engineering Materials & Structures, 42(2) (2019) 439-453.

[31] ASTM E399-20, Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials AI, West Conshohocken, PA, (2020), www.astm.org.

[32] A.R. Torabi, M. Kamyab, The fictitious material concept, Engineering Fracture Mechanics, 209 (2019) 17-31.

[33] M. Aliha, M. Ayatollahi, Geometry effects on fracture behaviour of polymethyl methacrylate, Materials Science and Engineering: A, 527(3) (2010) 526-530.

[34] M. Ayatollahi, M. Aliha, Analysis of a new specimen for mixed mode fracture tests on brittle materials, Engineering Fracture Mechanics, 76(11) (2009) 1563-1573.

[35] M.R. Ayatollahi, M. Aliha, S. Rahmanian, Finite Element Analysis of an Improved Center Crack Specimen, in:  Key Engineering Materials, 347 (2007) 441-446.

[36] ASTM E8 / E8M-08, Standard Test Methods for Tension Testing of Metallic Materials. ASTM International WC, PA, (2008), www.astm.org.

[37] ASTM A240 / A240M-20a. Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications. ASTM International WC, PA, 2020, www.astm.org.

[38] A.R. Torabi, M. Kamyab, Mixed mode I/II failure prediction of thin U-notched ductile steel plates with significant strain-hardening and large strain-to-failure: The Fictitious Material Concept, European Journal of Mechanics-A/Solids, 75 (2019) 225-236.

[39] M.L.Williams, On the Stress Distribution at the Base of a Stationary Crack, Journal of Applied Mechanics, 24 (1) (1956) 109-114.

[40] G.C. Sih, Strain-energy-density factor applied to mixed mode crack problems, International Journal of fracture, 10(3) (1974) 305-321.

[41] M.R. Ayatollahi, M.R. Moghaddam, F. Berto, A generalized strain energy density criterion for mixed mode fracture analysis in brittle and quasi-brittle materials, Theoretical and Applied Fracture Mechanics, 79 (2015) 70-76.

[42] F. Erdogan, G. Sih, On the crack extension in plates under plane loading and transverse shear, J. Basic Eng, 85(4) (1963) 519-525.

[43] D.J. Smith, M.R. Ayatollahi, M.J. Pavier, The role of T‐stress in brittle fracture for linear elastic materials under mixed‐mode loading, Fatigue & Fracture of Engineering Materials & Structures, 24(2) (2001) 137-150.

[44] S. Shahbaz, M.R. Ayatollahi, A.R. Torabi, S. Cicero, Fracture Behavior of Two Biopolymers Containing Notches: Effects of Notch Tip Plasticity, Applied Sciences, 10(23) (2020), https://doi.org/10.3390/app10238445.

[45] A.R. Torabi, A. Rahimi, M. Ayatollahi, Fracture study of a ductile polymer-based nanocomposite weakened by blunt V-notches under mode I loading: Application of the Equivalent Material Concept, Theoretical and Applied Fracture Mechanics, 94 (2018) 26-33.

[46] A.R. Torabi, E. Pirhadi, Stress-based criteria for brittle fracture in key-hole notches under mixed mode loading, European Journal of Mechanics-A/Solids, 49 (2015) 1-12.

[47] A. Kotousov, Effect of plate thickness on stress state at sharp notches and the strength paradox of thick plates, International Journal of Solids and Structures, 47(14-15) (2010) 1916-1923.

[48] A. Kotousov, P. Lazzarin, F. Berto, S. Harding, Effect of the thickness on elastic deformation and quasi-brittle fracture of plate components, Engineering Fracture Mechanics, 77(11) (2010) 1665-1681.

[49] L.P. Pook, A. Campagnolo, F. Berto, P. Lazzarin, Coupled fracture mode of a cracked plate under anti-plane loading, Engineering Fracture Mechanics, 134 (2015) 391-403.