ارزیابی ریسک لرزه‌ای و تولید منحنی خسارت ساختمآن‌های مجهز به سیستم جداساز لاستیکی هسته-سربی در طول عمر ساختمان تحت اثر توالی‌های محتمل لرزه-پس‌لرزه در شهر تهران

[1] A. Maghsoudi-Barmi, A. Khansefid, Technical and economic evaluation of new damping and isolation seismic systems in urban projects, in: 6th National Conference on Applied Research in Civil Engineering, Architecture and Urban Management, Tehran, Iran (2019) (in Persian).

[2] G.C. Marano, R. Greco, Efficiency of base isolation systems in structural seismic protection and energetic assessment, Earthquake engineering & structural dynamics, 32(10) (2003).

[3] I.V. Kalpakidis, M.C. Constantinou, A.S. Whittaker, Modelling strength degradation in lead–rubber bearings under earthquake shaking, Earthquake engineering & structural dynamics, 39(13) (2010).

[4] S. Chimamphant, K. Kasai, Comparative response and performance of base‐isolated and fixed‐base structures, Earthquake Engineering & Structural Dynamics, 45(1) (2016).

[5] A. Kanyilmaz, C.A. Castiglioni, Reducing the seismic vulnerability of existing elevated silos by means of base isolation devices, Engineering Structures, 143 (2017).

[6] T.Y. Yang, H. Zhang, Seismic Safety Assessment of Base-Isolated Buildings Using Lead-Rubber Bearings, Earthquake Spectra, 35(3) (2019).

[7] A. Ali, N.A. Hayah, D. Kim, S.G. Cho, Probabilistic seismic assessment of base-isolated NPPs subjected to strong ground motions of Tohoku earthquake, Nuclear Engineering and Technology, 46(5) (2014).

[8] M. Kumar, A.S. Whittaker, R.P. Kennedy, J.J. Johnson, A. Kammerer, Seismic probabilistic risk assessment for seismically isolated safety-related nuclear facilities, Nuclear Engineering and Design, 313 (2017).

[9] C.C. Yu, C. Bolisetti, J.L. Coleman, B. Kosbab, A.S. Whittaker, Using seismic isolation to reduce risk and capital cost of safety-related nuclear structures, Nuclear Engineering and Design, 326, (2018).

[10] M. Cutfield, K. Ryan, Q. Ma, Comparative life cycle analysis of conventional and base-isolated buildings,. Earthquake Spectra, 32(1) (2016).

[11] K. Goda, C.S. Lee, H.P. Hong, Lifecycle cost–benefit analysis of isolated buildings. Structural Safety, 32(1) (2010).

[12] H. Wang, D. Weng, Life-Cycle Cost Assessment of Seismically Base-Isolated Large Tanks in LNG Plants,  in: Pressure Vessels and Piping Conference (Vol. 55744, p. V008T08A005), American Society of Mechanical Engineers, USA.

[13] M. Mousazadeh, F. Pourreza, M.C. Basim, M.R. Chenaghlou, An efficient approach for LCC-based optimum design of lead-rubber base isolation system via FFD and analysis of variance (ANOVA), Bulletin of Earthquake Engineering, 18(4) (2020).

[14] A. Khansefid, A. Maghsoudi-Barmi, A. Bakhshi, Seismic performance assessment of optimally designed base isolation system under mainshock-aftershock sequences, In 8th International Conference on Seismology and Earthquake Engineering, Tehran, Iran (2019).

[15] C.H. Zhai, Z. Zheng, S. Li, X. Pan, Damage accumulation of a base-isolated RCC building under mainshock-aftershock seismic sequences, KSCE Journal of Civil Engineering, 21(1) (2017).

[16]H.P. Lee, M.S. Cho, S. Kim, J.Y. Park, K.S. Jang, Experimental study on the compressive stress dependency of full scale low hardness lead rubber bearing, Structural Engineering and Mechanics, 50(1) (2014).

[17] I. Iervolino, M. Giorgio, E. Chioccarelli, Closed‐form aftershock reliability of damage‐cumulating elastic‐perfectly‐plastic systems, Earthquake engineering & structural dynamics, 43(4) (2014).

[18] I. Iervolino, M. Giorgio, E. Chioccarelli, Markovian modeling of seismic damage accumulation. Earthquake Engineering & Structural Dynamics, 45(3) (2016).

[19] I. Iervolino, E. Chioccarelli, A. Suzuki, Seismic damage accumulation in multiple mainshock–aftershock sequences, Earthquake Engineering & Structural Dynamics, 49(10) (2020).

[20] A. Khansefid, Lifetime risk-based seismic performance assessment of buildings equipped with supplemental damping and base isolation systems under probable mainshock-aftershock scenarios, Structures, 34 (2021).

[21] A. Khansefid, Probabilistic Optimization of Structures Equipped with Active Vibration Control Systems Under Probable Mainshock-Aftershock Sequences of the Iranian Plateau, PhD dissertation, Sharif University of Technology, Tehran, Iran (2018) (In Persian).

[22] Engineering optimization research group, Probabilistic Seismic Hazard Analysis of Iran, Tehran, Iran, Iranian Planning and Budget Organization, https://iranhazard.mporg.ir/  (2020).

[23] Structural Engineering Institute, ASCE_07-16: Minimum design loads for buildingsand other structures, Viriginia, USA: ASCE (2016).

[24] C. Christopoulos, A. Filiatrault, V.V. Bertero, Principles of passive supplemental damping and seismic isolation, : Iuss press, Pavia, Italy, (2006).

[25] E. Zitzler, M. Laumanns, S. Bleuler, A tutorial on evolutionary multiobjective optimization, Metaheuristics for multiobjective optimisation, (2004).

[26] M. Ismail, F. Ikhouane, J. Rodellar, The hysteresis Bouc-Wen model, a survey, Archives of computational methods in engineering, 16(2) (2009).

[27] A.K. Chopra, Dynamics of structures, Pearson Education, India, (2011).

[28] A. Khansefid, A. Bakhshi, New model for simulating random synthetic stochastic earthquake scenarios, Journal of Earthquake Engineering, (2019).

[29] L. Danciu, K. Sesetyan, M. Demircioglu, M., Erdik, D. Giardini, OpenQuake input files of the seismogenic source model of the 2014 earthquake model of the Middle East (EMME-Project), (2016), doi:10.12686/a3.

[30] T. Anagnos, A.S. Kiremidjian, A review of earthquake occurrence models for seismic hazard analysis, Probabilistic Engineering Mechanics, 3(1) (1988).

[31] T. Utsu, Y. Ogata, The centenary of the Omori formula for a decay law of aftershock activity, Journal of Physics of the Earth, 43(1) (1995).

[32] A. Khansefid, A. Bakhshi, Statistical evaluation and probabilistic modeling of aftershock sequences of Iranian plateau, Journal of Seismology, 22(5) (2018).

[33] A. Khansefid, A., Bakhshi, A. Ansari, Empirical predictive model for generating synthetic non-stationary stochastic accelerogram of the Iranian plateau: including far-and near-field effects as well as mainshock and aftershock categorization, Bulletin of Earthquake Engineering, 17(7) (2019).

[34] S. Rezaeian, A. Der Kiureghian, Simulation of orthogonal horizontal ground motion components for specified earthquake and site characteristics, Earthquake Engineering & Structural Dynamics, 41(2) (2012).

[35] M. Dabaghi, A. Der Kiureghian, Simulation of orthogonal horizontal components of near‐fault ground motion for specified earthquake source and site characteristics, Earthquake Engineering & Structural Dynamics, 47(6) (2018).

[36] A. Khansefid, Pulse-like ground motions: Statistical characteristics, and GMPE development for the Iranian Plateau, Soil Dynamics and Earthquake Engineering, 134 (2020).

[37] Federal Emergency Management Agency (FEMA), HAZUS-MH 2.1 Earthquake Model Technical Manual, Federal Emergency Management Agency, Washington, D.C., USA, (2013).

[38] Federal Emergency Management Agency, Seismic Performance Assessment of Buildings Volume 1 – Methodology Second Edition, FEMA P-58-1, Applied Technology Council, Washington D.C., USA, (2018).

[39] A. Khansefid, A. Bakhshi, Advanced two-step integrated optimization of actively controlled nonlinear structure under mainshock–aftershock sequences, Journal of Vibration and Control, 25(4) (2019).

[40] A. Khansefid, An investigation of the structural nonlinearity effects on the building seismic risk assessment under mainshock–aftershock sequences in Tehran metro city, Advances in Structural Engineering, 24(16) (2019) .

[41] Iranian Statistical Center, Iranian Statistical Yearbook 1395, Iranian Statistical Center (2017) (In Pearsian).

[42] Joint Committee of Structural Safety, Probabilistic model code: part III - resistance models, (2001), Available at:

https://www.jcss-lc.org/jcss-probabilistic-model-code/

[43] C. Robert, Casella G. Monte Carlo Statistical Methods. 2nd ed: Springer, (2004).

[44] G. Hahn, Sample Sizes for Monte Carlo Simulation, IEEE Transactions on Systems, Man, and Cybernetics SMC-2 (1972).

[45] K. Porter, A beginner’s guide to fragility, vulnerability, and risk, Encyclopedia of earthquake engineering, (2015).