پیوندهای مفید
آمار
| تعداد نشریات | 7 |
| تعداد شماره‌ها | 399 |
| تعداد مقالات | 5,389 |
| تعداد مشاهده مقاله | 5,288,012 |
| تعداد دریافت فایل اصل مقاله | 4,882,748 |
بررسی و مقایسه تاثیر الیاف‌های فولادی، پلیپروپیلن و کورتا در بهبود رفتار خمشی تیرهای بتن مسلح | ||
| نشریه مهندسی عمران امیرکبیر | ||
| مقاله 18، دوره 54، شماره 7، مهر 1401، صفحه 2779-2794 اصل مقاله (1.38 M) | ||
| نوع مقاله: مقاله پژوهشی | ||
| شناسه دیجیتال (DOI): 10.22060/ceej.2022.19457.7179 | ||
| نویسندگان | ||
| فریدون امیدی نسب* 1؛ عباس اسکندری1؛ امیرحسین صحرایی مقدم2 | ||
| 1دانشکده فنی و مهندسی، دانشگاه لرستان، خرم آباد، ایران | ||
| 2دانشکده فنی و مهندسی، دانشگاه صنعتی نوشیروانی، بابل، ایران | ||
| چکیده | ||
| مزایای سازههای بتن آرمه نسبت به دیگر سازهها، سبب شده که امروزه بتن به یکی از پر کاربردترین مصالح ساخت و ساز تبدیل گردد. با این حال، رفتار ترد بتن تحت بارهای خمشی از نقاط ضعف آن محسوب می‌شود. بنابراین، تحقیق حاضر به بررسی تاثیر الیاف‌های مختلف بر رفتار خمشی تیرهای بزرگ مقیاس می‌پردازد. به این منظور، چهار نمونه تیر بتن مسلح با طول 150، عرض 20 و ارتفاع 30 سانتی‌متر با جزئیات آرماتورگذاری یکسان ساخته شد. تیرها با استفاده از سه نوع الیاف شامل الیاف‌های فولادی، پلیپروپیلن و کورتا به اندازه 0/5 درصد حجم بتن مسلح شدند. آزمایش مقاومت خمشی بر اساس استاندارد ASTM C78 بر روی تیرها انجام و پارامترهای مقاومت خمشی، جذب انرژی، شکل پذیری و کرنش میلگردها مورد بررسی قرار گرفت. نتایج نشان داد که تیرهای حاوی الیاف فولادی در مقایسه با تیرهای حاوی الیاف‌های پلیپروپیلن و کورتا از لحاظ پارامترهای مقاومت خمشی، جذب انرژی و ظرفیت میلگردهای کششی عملکرد بهتری را از خود نشان می‌دهند. علاوه بر این، نتایج نشان دهنده‌ی شکل‌پذیری مطلوب‌تر تیرهای مسلح شده به الیاف کورتا نسبت به تیرهای مسلح شده به الیاف پلیپروپیلن می‌باشد. | ||
| کلیدواژه‌ها | ||
| الیاف فولادی؛ الیاف پلیپروپیلن؛ الیاف کورتا؛ رفتار خمشی؛ تیر بتن مسلح؛ شکل‌پذیری | ||
| موضوعات | ||
| تکنولوژی بتن؛ فیبرهای پلیمری تقویت‌شده؛ مصالح نوین جهت اصلاح خواص بتن | ||
| عنوان مقاله [English] | ||
| Investigation and comparison of the influence of steel, polypropylene, and korta fibers in improving the flexural performance of reinforced concrete beams | ||
| نویسندگان [English] | ||
| Fereydoon Omidinasab1؛ Abas Eskandari1؛ Amirhosein Sahraei Moghadam2 | ||
| 1Civil, engineering, lorestan university, khorramabad, iran | ||
| 2Ph.D student, Faculty of Civil Engineering, Babol Noshirvani University of Technology, Babol, Iran | ||
| چکیده [English] | ||
| The advantages of reinforced concrete structures, in comparison with other structures, have made concrete one of the most widely used construction materials. However, concrete has brittle performance under flexural loads. Therefore, the present study investigates the influence of different fibers on the flexural performance of large-scale reinforced concrete beams. In order to achieve this goal, four reinforced concrete beams, with similar reinforcement details, measuring 150 cm long, 20 cm wide, and 30 cm high, were made. The beams were reinforced using 0.5% by volume of steel, polypropylene, and korta fibers. Based on ASTM C78, the four-point flexural test was performed and the parameters of flexural strength, energy absorption, ductility, and strain of the rebars were studied. The results indicated that reinforced concrete beam containing steel fibers shows better performance, in terms of flexural strength, energy absorption, and capacity of tensile rebars, in comparison with reinforced concrete beams containing polypropylene and korta fibers. In addition, this study showed that korta fiber reinforced beam has better ductility than polypropylene fiber reinforced beam. | ||
| کلیدواژه‌ها [English] | ||
| Steel fibers, Polypropylene fibers, Korta fibers, Flexural performance, Ductility | ||
|
سایر فایل های مرتبط با مقاله
|
||
| مراجع | ||
|
[1] J. Esfandiari, O. Heidari., Investigation on the behavior of concrete with optimum percentage of steel fiber,microsilica, fly ash and hybrid fiber under different loading pattern, Journal of Structural and Construction Engineering (JSCE). DOI: 10.22065/jsce.2020.182908.1840. (In Persian) [2] J. Esfandiari, R. Bayat, M. Tahamouli Roudsari, A. Shams., Engineering Properties Evaluation of Polypropylene Fibers Modified Asphalt Mixtures of Topeka Aggregation Based on Complex Procedure, Caspian Journal Applied Science Research. 3(1) (2014) 12-18 [3] A. Sahraei Moghadam, F. Omidinasab, A. Dalvand., Experimental investigation of (FRSC) cementitious composite functionally graded slabs under projectile and drop weight impacts, Construction and Building Materials. 237 (2020) 117522. [4] A. Sahraei Moghadam, F. Omidinasab., Assessment of hybrid FRSC cementitious composite with emphasis on flexural performance of functionally graded slabs, Construction and Building Materials. 250 (2020) 118904. [5] J. Esfandiari, K. Latifi., Numerical Study of Progressive Collapse in Reinforced Concrete Frames with FRP under Column Removal, Advances in Concrete Construction. 8(3) (2019) 165-172 [6] S. Esfandiari, J. Esfandiari., Simulation of the behaviour of RC columns strengthen with CFRP under rapid loading, Advances in Concrete Construction. 4 (4) (2019) 319-332. [7] F. Omidinasab, A. Sahraei Moghadam., Effect of Purposive Distribution of Fibers to Prevent the Penetration of Bullet in Concrete Walls, KSCE Journal of Civil Engineering. 25(3) (2021) 843-853. [8] A. Sahraei Moghadam, F. Omidinasab, A. Dalvand., Flexural and impact performance of functionally graded reinforced cementitious composite (FGRCC) panels, Structures. 29 (2021) 1723–1733. [9] R.N. Swamy, S.A. Al-Taan., Deformation and ultimate strength in flexure of reinforced concrete beams made with steel fiber concrete, ACI J. Proc. 78 (5) (1981) 395–405. [10] D.Y. Yoo, N. Banthia, J.M. Yang, Y.S. Yoon., Size effect in normal- and high-strength amorphous metallic and steel fiber reinforced concrete beams, Construction Building and Materials. 121 (2016) 676–685. [11] A. Caggiano, M. Cremona, C. Faella, C. Lima, E. Martinelli., Fracture behavior of concrete beams reinforced with mixed long/short steel fibers, Construction and Building Materials. 37 (2012) 832–840. [12] A. Hosseini, D. Mostofinejad, M. Hajialilue-bonab., Displacement and strain field measurement in steel and RC beams using particle image velocimetry, Engineering Mechanics. 4 (2012) 1–10. [13] A.B. Abdui-Ahad, Q.Q. Aziz., Flexural strength of reinforced concrete T-beams with steel fibers, Cement Concrete Composite. 21(1) (1999) 263–268. [14] F. Altun, T. Haktanir, K. Ari., Effects of steel fiber addition on mechanical properties of concrete and RC beams, Construction and Building Materials. 21(1) (2007) 654–661. [15] F. Altun, B. Aktaş., Investigation of reinforced concrete beams behavior of steel fiber added lightweight concrete, Construction and Building Materials. 38(1 (2013) 575–581. [16] R. Narayanan, I.Y.S. Darwish., Use of steel fibers as shear reinforcement, ACI Struct. J. 84(3) (1987) 1125–1132. [17] C. Qian, I. Parnaikuni., Properties of high-strength steel fiber-reinforced concrete beams in bending, Cement Concrete Composite. 21(1) (1999) 73–81. [18] A. Jodeiri, R. Quitalig., Effect of Steel Fibre on Flexural Capacity of Reinforced Concrete Beam, Journal of Civil Engineering Research. (2) (2012) 100-107. [19] A. Fatih, H. Tefaruk, A.Kamura., Effects of Steel Fiber Addition on Mechanical Properties of Concrete and RC Beams, Construction and Building Materials. 21 (2005) 654–661. [20] K. Marar, Ö. Eren, T. Celik., Relationship Between Impact Energy and Compression Toughness Energy of High-Strength Fiber-Reinforced Concrete, Materials Letters. 47 (2001) 297-304. [21] S. Arivalagan., Earthquake-Resistant Performance of Polypropylene Fiber Reinforced Concrete Beams, Journal of Engineering and Technolog. 2(1) (2012) 63-67. [22] M.T. Nahhas., Flexural behavior and ductility of reinforced lightweight concrete beams with polypropylene fiber, J. Constr. Eng. Manag. 1(1) (2013) 4–10. [23] R. Jeffery, A. Salah, A. David, R. Klaus-Alexander, R. Gregory., Effect of synthetic fibers on structural behavior of concrete slabs-onground, Mater. J. 103(1) (2006) 3–10. [24] Z.D.F. Zhihong, D. Feldman., Synthetic fiber-reinforced concrete, Progr. Polym. Sci. 20 (1995) 185–210. [25] J.P. Won, D.H. Lim, C.G. Park., Bond behaviour and flexural performance of structural synthetic fibre-reinforced concrete, Mag. Concr. Res. 58(6) (2006) 401–410. [26] D. Prisco, M. Plizzari, G.L. Vandewalle., Fiber reinforced concrete: new design perspectives, Materials and Structures. 42(9) (2009) 1261–81. [27] V. Afroughsabet., High-performance fiber-reinforced concrete: a review, materials science. 51 (2016) 6517–6551. [28] H.J. Byung, C. Young., Fracture behavior of concrete members reinforced with structural synthetic fibers, Engineering Fracture Mechanics. 74 (2007) 243–257. [29] F. Bencardino, L. Rizzuti, G. Spadea, R. Swamy., Experimental evaluation of fiber reinforced concrete fracture properties, Composites Part B: Engineering. 41 (2010) 17–24. [30] A. Caggiano, M. Cremona, C. Faella, C. Lima, E. Martinelli., Fracture behavior of concrete beams reinforced with mixed long/short steel fibers, Construction and Building Materials. 37 (2012) 832–840. [31] M. Alberti, A. Enfedaque. J. Gálvez., Fracture mechanics of polyolefin fibre reinforced concrete: Study of the influence of the concrete properties, casting procedures, the fiber length and specimen size, Engineering Fracture Mechanics. 154 (2016) 225–244. [32] A. Meda, F. Minelli, G.A. Plizzari., Flexural behavior of RC beams in fiber reinforced concrete, Composite B Engineering. 43 (2012) 2930–2937. [33] M.N. Soutsos, T.T. Le, A.P. Lampropoulos., Flexural performance of fiber reinforced concrete made with steel and synthetic fibers, Construction and Building Materials. 36 (2012) 704–710. [34] Y. Jun-Mo, M. Kyung-Hwan, Sh. Hyun-Oh, Y. Young-Soo., Effect of steel and synthetic fibers on flexural behavior of high-strength concrete beams reinforced with FRP bars, Composite: Part B. 43 (2012) 1077–1086. [35] G. Campione, M.L. Mangiavillano., Fibrous reinforced concrete beams in flexure: experimental investigation: analytical modeling and design considerations, Eng. Struct. 30(1) (2008) 2970–2980. [36] K. Mohamed, A.A. Assem., An experimental study on flexural behaviour of large-scale concrete beams incorporating crumb rubber and steel fibres, Eng. Struct. 145(1) (2017) 97–108. [37] M. Alhassan, R. Al-Rousan, A. Ababneh., Flexural behavior of lightweight concrete beams encompassing various dosages of macro synthetic fibers and steel ratios, Construction Building and Materials. 7 (2017) 280–293. [38] ASTM C150 / C150M-20, Standard Specification for Portland Cement, ASTM International, West Conshohocken, PA, 2020. [39] ASTM C33 / C33M-18, Standard Specification for Concrete Aggregates, ASTM International, West Conshohocken, PA, 2018. [40] ASTM A615 / A615M-20, Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement, ASTM International, West Conshohocken, PA, 2020. [41] ASTM C78 / C78M-21, Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading), ASTM International, West Conshohocken, PA, 2021. | ||
|
آمار تعداد مشاهده مقاله: 1,043 تعداد دریافت فایل اصل مقاله: 754 |
||
