دوام ملات‌های پوششی سیمانی و ژئوپلیمری در شرایط محیطی شبیه‌سازی شده خلیج فارس

[1] P. Ghods, M. Chini, R. Alizadeh, M. Hoseini, M. Shekarchi, A. Ramezanianpour, The effect of different exposure conditions on the chloride diffusion into concrete in the Persian Gulf region, 3th ConMat, 5  (2005).

[2] A. Ramezanianpour, A. Pourkhorshidi, T. Parhizkar, G.A. Raeis, Assessing durability of  concrete marine structures with different cements and pozzolans in tidal region of Persian Gulf environment, International Conference on Coasts, Ports and Marine Structures (ICOPMAS), ports & marine organization, (2005) (in Persian).

[3] A. Hadj-sadok, S. Kenai, L. Courard, A. Darimont, Microstructure and durability of mortars modified with medium active blast furnace slag, Construction & Building Materials, 25(2) (2011) 1018-1025.

[4] X. Shi, N. Xie, K. Fortune, J. Gong, Durability of steel reinforced concrete in chloride environments: An overview, Construction & Building Materials, 30 (2012) 125-138.

[5] R. Duval, E. Kadri, Influence of silica fume on the workability and the compressive strength of high- performance concretes, Cement & concrete research, 28(4) (1998) 533-547.

[6] J. Khatib, J. Hibbert, Selected engineering properties of concrete incorporating slag and metakaolin, Construction & building materials, 19(6) (2005) 460-472.

[7] G. Li, B. Yang, C. Guo, J. Du, X. Wu, Time dependence and service life prediction of chloride resistance of concrete coatings, Construction & Building Materials, 83 (2015) 19-25.

[8] A. Mahmoodi, H. Afshin, H. Hakimzadeh, D. Jalali, Investigation of durability of  reinforcement concrete in severe corrosive marine environment 3rd International Conference on Concrete and Development ,Tehran, 2009.

[9] A. Ramezanianpour, A. Kazemian, M. Nikravan, A. Mahpur, M. Moghadam, Influence of a low-activity slag and silica fume on the fresh properties and durability of high performance self-consolidating concrete, in:  Proceedings of 3rd International Conference on Sustainable Construction Materials and Technologies, 2013.

[10] R. Gado, M. Hebda, M. Łach, J. Mikuła, Alkali activation of waste clay bricks: Influence of the silica modulus, SiO2/Na2O, H2O/Na2O molar ratio, and liquid/solid ratio, Materials, 13(2) (2020) 383.

[11] M. Nawaz, A. Heitor, M. Sivakumar, Geopolymers in construction-recent developments, Construction & Building Materials, 260 (2020) 120472.

[12] A. Hassan, M. Arif, M. Shariq, Mechanical behaviour and microstructural investigation of geopolymer concrete after exposure to elevated temperatures, Arabian Journal for Science Engineering, 45(5) (2020) 3843-3861.

[13] J. Li, P. Sun, J. Li, Y. Lv, H. Ye, L. Shao, D. Du, Synthesis of electrolytic manganese residue-fly ash based geopolymers with high compressive strength, Construction & Building Materials, 248 (2020) 118489.

[14] W. Zhang, X. Yao, T. Yang, C. Liu, Z. Zhang, Increasing mechanical strength and acid resistance of geopolymers by incorporating different siliceous materials, Construction & Building Materials, 175 (2018) 411-421.

[15] A. Özcan, M.B. Karakoç, Evaluation of sulfate and salt resistance of ferrochrome slag and blast furnace slag‐based geopolymer concretes, Structural Concrete, 20(5) (2019) 1607-1621.

[16] S. Luhar, S. Chaudhary, I. Luhar, Thermal resistance of fly ash based rubberized geopolymer concrete, Journal of Building Engineering, 19 (2018) 420-428.

[17] R. Zhao, Y. Yuan, Z. Cheng, T. Wen, J. Li, F. Li, Z.J. Ma, Freeze-thaw resistance of Class F fly ash-based geopolymer concrete, Construction & Building Materials, 222 (2019) 474-483.

[18] F.N. Değirmenci, Freeze-Thaw and fire resistance of geopolymer mortar based on natural and waste pozzolans,  (2018).

[19] M.J. Nadoushan, A.A. Ramezanianpour, The effect of type and concentration of activators on flowability and compressive strength of natural pozzolan and slag-based geopolymers, Construction & Building Materials, 111 (2016) 337-347.

[20] A.A. Ramezanianpour, M.A. Moeini, Mechanical and durability properties of alkali activated slag coating mortars containing nanosilica and silica fume, Construction & Building Materials, 163 (2018) 611-621.

[21] P. Duxson, J.L. Provis, G.C. Lukey, S.W. Mallicoat, W.M. Kriven, J.S. Van Deventer, Understanding the relationship between geopolymer composition, microstructure and mechanical properties, Colloids & Surfaces A: Physicochemical & Engineering Aspects, 269(1-3) (2005) 47-58.

[22] ASTM C989 / C989M-18a, Standard Specification for Slag Cement for Use in Concrete and Mortars, ASTM International, West Conshohocken, PA, 2018.

[23] ASTM C778-17, Standard Specification for Standard Sand, ASTM International, West Conshohocken, PA, 2017.

[24] P. Dashti, Mechanical and durability properties of silica fume blended cement concrete against chloride ions attack and carbonation, MSc Thesis, Amirkabir University of Technology (Tehran Polytechnic), 2019.

[25] A.A. Ramezanianpour, S. Sedighi, M. Kazemian, A. M. Ramezanianpour, Effect of micro silica and slag on the durability properties of mortars against accelerated carbonation and chloride ions attack, 4(4) (2020) 2-2.

[26] S.M.M. Karein, A. Ramezanianpour, T. Ebadi, S. Isapour, M. Karakouzian, A new approach for application of silica fume in concrete: Wet granulation, Construction & Building Materials, 157 (2017) 573-581.

[27] M.J. Nadoushan, Production of geopolymer coatings to improve mechanical properties and durability of concrete against chloride ions penetration, PhD Thesis, Amirkabir University of Technology (Tehran Polytechnic), 2017, (in Persian).

[28] ASTM C230, Standard Specification for Flow Table for Use in Tests of Hydraulic Cement, ASTM International, West Conshohocken, PA.

[29] ASTM C109 / C109M-20a, Standard Test Method for Compressive Strength of Hydraulic Cement Mortars, ASTM International, West Conshohocken, PA, 2020.

[30] ASTM D7234-19, Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers, ASTM International, West Conshohocken, PA, 2019.

[31] ASTM C596-18, Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement, ASTM International, West Conshohocken, PA, 2018.

[32] EN 480-5, Admixtures for concrete, mortar and grout. Test methods. Determination of capillary absorption, European Standard (EN), (1997).

[33] BS EN 12390-8, Testing hardened concrete. Depth of penetration of water under pressure.

[34] NT Build 492, Nord Test Method: Chloride Migration Coefficients from Non Steady-State, 1999.

[35] R. Banar, P. Dashti, A. Zolfagharnasab, A.M. Ramezanianpour, A.A. Ramezanianpour, A comprehensive comparison between using silica fume in the forms of water slurry or blended cement in mortar/concrete, Journal of Building Engineering, 46 (2022) 103802.

[36] F. Moodi, S. Norouzi, P. Dashti, Mechanical properties and durability of alkali-activated slag repair mortars containing silica fume against freeze-thaw cycles and salt scaling attack, Advances in concrete construction, (2021).

[37] E.R. Dehkordi, A.A. Ramezanianpour, F. Moodi, Application of pre-fabricated geopolymer permanent formworks (PGPFs): A novel approach to provide durability and mechanical strength of reinforced concrete, Journal of Building Engineering, 45 (2022) 103517.

[38] F. Moodi , A.A. Ramezanianpor, F. Farhadian, P. Dashti, Durability of cementitious and geopolymer coating mortars against sulfuric acid attack, Amirkabir Journal of Civil Engineering, 53(9) (2021) 6-6.

[39] A.A. Ramezanianpour, F.B. Zadeh, A. Zolfagharnasab, A.M. Ramezanianpour, Mechanical properties and chloride ion penetration of alkali activated slag concrete, in:  High Tech Concrete: Where Technology and Engineering Meet, Springer, 2018, pp. 2203-2212.

[40] F.B. Zadeh, Mechanical properties and chloride ions penetration in alkali acticvated slag concrete, MSc Thesis, Amirkabir University of Technology (Tehran Polytechnic), 2015.