پیوندهای مفید
آمار
| تعداد نشریات | 7 |
| تعداد شماره‌ها | 399 |
| تعداد مقالات | 5,389 |
| تعداد مشاهده مقاله | 5,288,037 |
| تعداد دریافت فایل اصل مقاله | 4,882,775 |
Stability Analysis of a Functionally Graded Carbon Nanotube Reinforced Composite Plate Integrated with Piezoelectric Layers under Supersonic Airflow | ||
| AUT Journal of Mechanical Engineering | ||
| مقاله 3، دوره 6، شماره 4، اسفند 2022، صفحه 525-544 اصل مقاله (1.28 M) | ||
| نوع مقاله: Research Article | ||
| شناسه دیجیتال (DOI): 10.22060/ajme.2019.16343.5815 | ||
| نویسندگان | ||
| Mohammad Hosseini* ؛ Kazem Majidi-Mozafari | ||
| Department of Mechanical Engineering, Sirjan University of Technology, Sirjan, Iran | ||
| چکیده | ||
| The dynamic and static instabilities of plates reinforced by carbon nanotubes which are fully covered by two piezoelectric layers subjected to supersonic airflow are investigated. For aero-elastic analysis of thin functionally graded carbon nanotube reinforced composite plate, classical plate theory, as well as first-order piston theory, has been applied. The effective material properties of functionally graded carbon nanotube-reinforced composite plates are evaluated based on the rule of mixture with consideration of efficiency parameter. Also, five various types of carbon nanotube distributions through the thickness direction are investigated. The distribution of electric potential across the piezoelectric thickness is assumed to be a quadratic function. Then, two kinds of electric boundary conditions such as open circuit and closed circuit are considered. The coupled governing electro-mechanical equations are derived by using Hamilton’s variation principle and electrostatic Maxwell’s equation. The partial differential governing equations are transformed into a set of ordinary differential equations by utilizing Galerkin’s approach. The result shows that the functionally graded carbon nanotube-reinforced composite plate integrated by two piezoelectric layers in open circuit condition has higher both flutter aerodynamic pressure and natural frequencies, in contrast with a similar plate in closed circuit conditions. In addition, the result elucidated that the stability region increase as the piezoelectric thickness increases. | ||
| کلیدواژه‌ها | ||
| Aero-elastic؛ Carbon nanotube؛ Composite plates؛ Piezoelectric layers؛ First-order piston theory | ||
| مراجع | ||
|
[1] M. Cadek, J. Coleman, V. Barron, K. Hedicke, W. Blau, Morphological and mechanical properties of carbon-nanotube-reinforced semicrystalline and amorphous polymer composites, Applied physics letters, 81(27) (2002) 5123-5125.
[2] E.T. Thostenson, T.-W. Chou, On the elastic properties of carbon nanotube-based composites: modelling and characterization, Journal of Physics D: Applied Physics, 36(5) (2003) 573.
[3] N. Hu, H. Fukunaga, C. Lu, M. Kameyama, B. Yan, Prediction of elastic properties of carbon nanotube reinforced composites, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 461(2058) (2005) 1685-1710.
[4] H.-S. Shen, Nonlinear bending of functionally graded carbon nanotube-reinforced composite plates in thermal environments, Composite Structures, 91(1) (2009) 9-19.
[5] P. Zhu, Z. Lei, K.M. Liew, Static and free vibration analyses of carbon nanotube-reinforced composite plates using finite element method with first order shear deformation plate theory, Composite Structures, 94(4) (2012) 1450-1460.
[6] Z. Lei, K. Liew, J. Yu, Buckling analysis of functionally graded carbon nanotube-reinforced composite plates using the element-free kp-Ritz method, Composite Structures, 98 (2013) 160-168.
[7] Z. Lei, K. Liew, J. Yu, Free vibration analysis of functionally graded carbon nanotube-reinforced composite plates using the element-free kp-Ritz method in thermal environment, Composite Structures, 106 (2013) 128-138.
[8] M. Wang, Z.-M. Li, P. Qiao, Semi-analytical solutions to buckling and free vibration analysis of carbon nanotube-reinforced composite thin plates, Composite Structures, 144 (2016) 33-43.
[9] N. Wu, Q. Wang, S. Quek, Free vibration analysis of piezoelectric coupled circular plate with open circuit, Journal of Sound and Vibration, 329(8) (2010) 1126-1136.
[10] M.A. Farsangi, A. Saidi, R. Batra, Analytical solution for free vibrations of moderately thick hybrid piezoelectric laminated plates, Journal of Sound and Vibration, 332(22) (2013) 5981-5998.
[11] Y. Kiani, Free vibration of functionally graded carbon nanotube reinforced composite plates integrated with piezoelectric layers, Computers & Mathematics with Applications, 72(9) (2016) 2433-2449.
[12] L. Zhang, Z. Song, K. Liew, Computation of aerothermoelastic properties and active flutter control of CNT reinforced functionally graded composite panels in supersonic airflow, Computer Methods in Applied Mechanics and Engineering, 300 (2016) 427-441.
[13] B. Selim, L. Zhang, K. Liew, Active vibration control of CNT-reinforced composite plates with piezoelectric layers based on Reddy’s higher-order shear deformation theory, Composite Structures, 163 (2017) 350-364.
[14] G. Cheng, Y. Lee, C. Mei, Flow angle, temperature, and aerodynamic damping on supersonic panel flutter stability boundary, Journal of aircraft, 40(2) (2003) 248-255.
[15] H. Navazi, H. Haddadpour, Aero-thermoelastic stability of functionally graded plates, Composite Structures, 80(4) (2007) 580-587.
[16] K.-J. Sohn, J.-H. Kim, Structural stability of functionally graded panels subjected to aero-thermal loads, Composite Structures, 82(3) (2008) 317-325.
[17] M. Hosseini, S. Fazelzadeh, Aerothermoelastic post-critical and vibration analysis of temperature-dependent functionally graded panels, Journal of Thermal Stresses, 33(12) (2010) 1188-1212.
[18] P. Marzocca, S. Fazelzadeh, M. Hosseini, A review of nonlinear aero-thermo-elasticity of functionally graded panels, Journal of Thermal Stresses, 34(5-6) (2011) 536-568.
[19] Z.-G. Song, F.-M. Li, Investigations on the flutter properties of supersonic panels with different boundary conditions, International Journal of Dynamics and Control, 2(3) (2014) 346-353.
[20] S. Fazelzadeh, S. Pouresmaeeli, E. Ghavanloo, Aeroelastic characteristics of functionally graded carbon nanotube-reinforced composite plates under a supersonic flow, Computer Methods in Applied Mechanics and Engineering, 285 (2015) 714-729.
[21] Z. Song, L. Zhang, K. Liew, Aeroelastic analysis of CNT reinforced functionally graded composite panels in supersonic airflow using a higher-order shear deformation theory, Composite Structures, 141 (2016) 79-90.
[22] J. Fidelus, E. Wiesel, F. Gojny, K. Schulte, H. Wagner, Thermo-mechanical properties of randomly oriented carbon/epoxy nanocomposites, Composites Part A: Applied Science and Manufacturing, 36(11) (2005) 1555-1561.
[23] M. Nie, D.M. Kalyon, F.T. Fisher, Interfacial load transfer in polymer/carbon nanotube nanocomposites with a nanohybrid shish kebab modification, ACS applied materials & interfaces, 6(17) (2014) 14886-14893.
[24] K. Liew, Z. Lei, J. Yu, L. Zhang, Postbuckling of carbon nanotube-reinforced functionally graded cylindrical panels under axial compression using a meshless approach, Computer Methods in Applied Mechanics and Engineering, 268 (2014) 1-17.
[25] A. Preumont, Piezoelectric systems, Mechatronics: Dynamics of Electromechanical and Piezoelectric Systems, (2006) 95-130.
[26] P. Lee, W. Lin, Piezoelectrically forced vibrations of rectangular SC-cut quartz plates, Journal of applied physics, 83(12) (1998) 7822-7833.
[27] Q. Wang, S. Quek, C. Sun, X. Liu, Analysis of piezoelectric coupled circular plate, Smart Materials and Structures, 10(2) (2001) 229.
[28] E.H. Dowell, Aeroelasticity of plates and shells, Noordhoff International Publishing, Leyden, 1975.
[29] E.H. Dowell, Nonlinear oscillations of a fluttering plate, AIAA journal, 4(7) (1966).
[30] M. Hosseini, R. Bahaadini, Size dependent stability analysis of cantilever micro-pipes conveying fluid based on modified strain gradient theory, International Journal of Engineering Science, 101 (2016) 1-13.
[31] R. Bahaadini, M. Hosseini, Effects of nonlocal elasticity and slip condition on vibration and stability analysis of viscoelastic cantilever carbon nanotubes conveying fluid, Computational Materials Science, 114 (2016) 151-159.
[32] R. Bahaadini, A.R. Saidi, M. Hosseini, On dynamics of nanotubes conveying nanoflow, International Journal of Engineering Science, 123 (2018) 181-196.
[33] Z.-X. Wang, H.-S. Shen, Nonlinear vibration of nanotube-reinforced composite plates in thermal environments, Computational Materials Science, 50(8) (2011) 2319-2330.
[34] Y. Han, J. Elliott, Molecular dynamics simulations of the elastic properties of polymer/carbon nanotube composites, Computational Materials Science, 39(2) (2007) 315-323.
[35] M. Mohammadzadeh-Keleshteri, H. Asadi, M. Aghdam, Geometrical nonlinear free vibration responses of FG-CNT reinforced composite annular sector plates integrated with piezoelectric layers, Composite Structures, 171 (2017) 100-112.
[36] J. Dugundji, Theoretical considerations of panel flutter at high supersonic Mach numbers, AIAA Journal, 4(7) (1966) 1257-1266.
[37] A.H. Baferani, A. Saidi, E. Jomehzadeh, An exact solution for free vibration of thin functionally graded rectangular plates, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 225(3) (2011) 526-536.
[38] A.R. Saidi, R. Bahaadini, K. Majidi-Mozafari, On vibration and stability analysis of porous plates reinforced by graphene platelets under aerodynamical loading, Composites Part B: Engineering, 164 (2019) 778-799.
[39] G. Chevallier, S. Ghorbel, A. Benjeddou, A benchmark for free vibration and effective coupling of thick piezoelectric smart structures, Smart Materials and Structures, 17(6) (2008) 065007. | ||
|
آمار تعداد مشاهده مقاله: 233 تعداد دریافت فایل اصل مقاله: 277 |
||