پیوندهای مفید
آمار
| تعداد نشریات | 7 |
| تعداد شماره‌ها | 399 |
| تعداد مقالات | 5,389 |
| تعداد مشاهده مقاله | 5,287,972 |
| تعداد دریافت فایل اصل مقاله | 4,882,721 |
بررسی عددی برهمکنش سیال-سازه برای پره انعطاف پذیر غیرمتصل در پشت یک استوانه دایره‌ای | ||
| نشریه مهندسی مکانیک امیرکبیر | ||
| مقاله 2، دوره 55، شماره 7، مهر 1402، صفحه 819-836 اصل مقاله (1.77 M) | ||
| نوع مقاله: مقاله پژوهشی | ||
| شناسه دیجیتال (DOI): 10.22060/mej.2023.22073.7561 | ||
| نویسندگان | ||
| ایمان زاهد؛ یاسر امینی* ؛ احسان ایزدپناه | ||
| دانشکده مهندسی، دانشگاه خلیج فارس، بوشهر، ایران | ||
| چکیده | ||
| یکی از چالش بر انگیزترین پدیده‌های مشاهده شده در محیط پیرامون، برهمکنش سیال-سازه است که می‌تواند نقش عمده‌ای در انتقال حرارت، کاهش نیروی پسا و برآ و همچنین برداشت انرژی داشته باشد. امروزه از این پدیده که برگرفته از پدیده‌های مشابه در طبیعت است برای افزایش بازده تجهیزات در حوزه مهندسی همچون توربین‌های بادی استفاده می‌شود. رفتار دینامیکی سازه‌های انعطاف‌پذیر در کنش با سیالات، به عنوان یک بحث در حال تکامل مهندسی در حوزه‌های صنعتی شامل سازه‌های استاتیکی، وسایل و شناورهای دریایی، مبدل‌های حرارتی و همچنین انتقال سیال شناخته می‌شود. در این پژوهش اثر بکارگیری پره‌‌ی انعطاف پذیر غیر متصل به استوانه دایره‌ای در جریان تراکم ناپذیر ناپایا با رژیم آشفته در حالت دوبعدی بررسی می‌گردد. همچنین جهت شبیه‌سازی عددی این مسئله، از روش عددی حجم محدود و روش اجزای محدود به صورت هم‌زمان و همچنین برای بررسی جریان آشفته از مدل کا-امگا اس اس تی باتوجه به قابلیت‌های آن استفاده می‌شود. اثر فاصله پره منعطف (0/5، 1و1/5 برابر قطر استوانه)، موقعیت قرار گرفتن آن ( بالادست یا پایین دست استوانه) و مدول یانگ بر مشخصات حرارتی و هیدرودینامیکی جسم بررسی گردید. نتایج نشان داد تاثیر موارد بررسی شده بر الگوی جریان، عدد ناسلت و ضرایب پسا و برا قابل توجه است. همچنین مقایسه حالت انعطاف‌پذیر پره با حالت صلب آن، نشان داد که انتقال حرارت تا 5% افزایش می‌یابد. | ||
| کلیدواژه‌ها | ||
| بر همکنش سیال-سازه؛ پره انعطاف‌پذیر غیر متصل؛ ریزش ورتیسیته؛ انتقال حرارت؛ جریان آشفته | ||
| عنوان مقاله [English] | ||
| Numerical investigation of fluid-structure interaction of a detached flexible plate behind a circular cylinder | ||
| نویسندگان [English] | ||
| Iman Zahed؛ Yasser Amini؛ Ehsan Izadpanah | ||
| Department of Mechanical Engineering, Persian Gulf University, Bushehr, 75169, Iran | ||
| چکیده [English] | ||
| Fluid-structural interaction is one of the most challenging phenomena observed in the surrounding environment, which can play a major role in increasing heat transfer, reducing drag and lift coefficients, energy dissipation, and reducing pressure drop. By inspiration from similar phenomena in nature, the dynamic behavior of flexible structures that interact with fluid is recognized as a novel application in industrial processes such as marine equipment, heat exchangers, and fluid transports. So, this phenomenon should be considered as a way to increase efficiency, eliminate defects, and prevent possible damage in industrial issues on a smaller scale. In this study, the effect of a detached flexible plate, which is placed at a specific distance from a circular cylinder, on aerodynamic and thermal parameters is investigated. This study is simulated by the finite volume method and the finite element method, simultaneously, and also kw-SST model is considered as the turbulent flow model. The fin is placed at different distances of 0.5D, 1D, and 1.5D in upstream and downstream of the circular cylinder, where D is the diameter of the cylinder. The results show that placing the fin at a distance 1D from cylinder downstream increases the Nusselt up to 5%. Moreover, the maximum reduction of the drag coefficient is obtained in this situation. | ||
| کلیدواژه‌ها [English] | ||
| Fluid-structure interaction, Flexible fin, Vortex Shedding, Heat transfer, Turbulent flow | ||
|
سایر فایل های مرتبط با مقاله
|
||
| مراجع | ||
|
[1] S. Turek, J. Hron, Proposal for numerical benchmarking of fluid-structure interaction between an elastic object and laminar incompressible flow, in: Fluid-structure interaction, Springer, (2006), pp. 371-385. [2] M. Heil, A.L. Hazel, J. Boyle, Solvers for large-displacement fluid–structure interaction problems: segregated versus monolithic approaches, Computational Mechanics, 43(1) (2008) 91-101. [3] G. De Nayer, A. Kalmbach, M. Breuer, S. Sicklinger, R. Wüchner, Flow past a cylinder with a flexible splitter plate: A complementary experimental–numerical investigation and a new FSI test case (FSI-PfS-1a), Computers & Fluids, 99 (2014) 18-43. [4] J. Shi, J. Hu, S.R. Schafer, C.-L.C. Chen, Numerical study of heat transfer enhancement of channel via vortex-induced vibration, Applied Thermal Engineering, 70(1) (2014) 838-845. [5] A.K. Soti, R. Bhardwaj, J. Sheridan, Flow-induced deformation of a flexible thin structure as manifestation of heat transfer enhancement, International Journal of Heat and Mass Transfer, 84 (2015) 1070-1081. [6] S. Mohammadshahi, M. Nili-Ahmadabadi, H. Samsam-Khayani, M.R. Salimpour, Numerical study of a vortex-induced vibration technique for passive heat transfer enhancement in internal turbulent flow, European Journal of Mechanics-B/Fluids, 72 (2018) 103-113. [7] C. Apelt, G. West, A. Szewczyk, The effects of wake splitter plates on bluff–body flow in the range 104< R< 5× 104, Journal of Fluid Mechanics, 61(1) (1973) 187-198. [8] C. Apelt, G. West, The effects of wake splitter plates on bluff-body flow in the range 10 4< R< 5× 10 4. Part 2, Journal of Fluid Mechanics, 71(1) (1975) 145-160. [9] H. Akilli, B. Sahin, N.F. Tumen, Suppression of vortex shedding of circular cylinder in shallow water by a splitter plate, Flow Measurement and Instrumentation, 16(4) (2005) 211-219. [10] J.-Y. Hwang, K.-S. Yang, S.-H. Sun, Reduction of flow-induced forces on a circular cylinder using a detached splitter plate, Physics of Fluids, 15(8) (2003) 2433-2436. [11] J.-Y. Hwang, K.-S. Yang, Drag reduction on a circular cylinder using dual detached splitter plates, Journal of Wind Engineering and Industrial Aerodynamics, 95(7) (2007) 551-564. [12] S.G. Park, B. Kim, H.J. Sung, Self-propelled flexible fin in the wake of a circular cylinder, Physics of fluids, 28(11) (2016) 111902. [13] Y. Amini, H. Emdad, M. Farid, An accurate model for numerical prediction of piezoelectric energy harvesting from fluid structure interaction problems, Smart Materials and Structures, 23(9) (2014) 095034. [14] M. Amiraslanpour, J. Ghazanfarian, S.E. Razavi, Drag suppression for 2D oscillating cylinder with various arrangement of splitters at Re= 100: a high-amplitude study with OpenFOAM, Journal of Wind Engineering and Industrial Aerodynamics, 164 (2017) 128-137. [15] H. Wang, Q. Zhai, J. Zhang, Numerical study of flow-induced vibration of a flexible plate behind a circular cylinder, Ocean Engineering, 163 (2018) 419-430. [16] J. Wu, C. Shu, N. Zhao, Numerical study of flow control via the interaction between a circular cylinder and a flexible plate, Journal of Fluids and Structures, 49 (2014) 594-613. [17] M. Farhadi, K. Sedighi, E. Fattahi, Effect of a splitter plate on flow over a semi-circular cylinder, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 224(3) (2010) 321-330. [18] K.-D. Ro, Experimental characterization of the flow field of square prism with a detached splitter plate at high reynolds number, Journal of Mechanical Science and Technology, 28(7) (2014) 2651-2657. [19] S. Turki, Numerical simulation of passive control on vortex shedding behind square cylinder using splitter plate, Engineering Applications of Computational Fluid Mechanics, 2(4) (2008) 514-524. [20] M.S.M. Ali, C.J. Doolan, V. Wheatley, Flow around a square cylinder with a detached downstream flat plate at a low Reynolds number, In 17th Australasian Fluid Mechanics Conference, (2010). 308-311. [21] S.U. Islam, H. Rahman, W.S. Abbasi, U. Noreen, A. Khan, Suppression of fluid force on flow past a square cylinder with a detached flat plate at low Reynolds number for various spacing ratios, Journal of Mechanical Science and Technology, 28(12) (2014) 4969-4978. [22] S.-U. Islam, R. Manzoor, A. Tareen, Numerical investigation of flow around square cylinder with an upstream control plate at low Reynolds numbers in tandem, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39(4) (2017) 1201-1223. [23] S.U. Islam, R. Manzoor, Z.C. Ying, M.M. Rashdi, A. Khan, Numerical investigation of fluid flow past a square cylinder using upstream, downstream and dual splitter plates, Journal of Mechanical Science and Technology, 31(2) (2017) 669-687. [24] S. Seyyedi, H. Bararnia, D. Ganji, M. Gorji-Bandpy, S. Soleimani, Numerical investigation of the effect of a splitter plate on forced convection in a two dimensional channel with an inclined square cylinder, International Journal of Thermal Sciences, 61 (2012) 1-14. [25] S. Seyyedi, D. Ganji, M. Gorji, H. Bararnia, S. Soleimani, Forced convection heat transfer due to different inclination angles of splitter behind square cylinder, Applied Mathematics and Mechanics, 34(5) (2013) 541-558. [26] N.M. Maruai, M.S. Mat Ali, M.H. Ismail, S.A.Z. Shaikh Salim, Downstream flat plate as the flow-induced vibration enhancer for energy harvesting, Journal of Vibration and Control, 24(16) (2018) 3555-3568. [27] H. Zhu, K. Wang, Wake adjustment and vortex-induced vibration of a circular cylinder with a C-shaped plate at a low Reynolds number of 100, Physics of Fluids, 31(10) (2019) 103602. [28] J. Allen, A. Smits, Energy harvesting eel, Journal of fluids and structures, 15(3-4) (2001) 629-640. [29] G.W. Taylor, J.R. Burns, S. Kammann, W.B. Powers, T.R. Welsh, The energy harvesting eel: a small subsurface ocean/river power generator, IEEE journal of oceanic engineering, 26(4) (2001) 539-547. [30] L. Tang, M.P. Païdoussis, J. Jiang, Cantilevered flexible plates in axial flow: energy transfer and the concept of flutter-mill, Journal of Sound and Vibration, 326(1-2) (2009) 263-276. [31] D.C. Wilcox, Turbulence modeling for CFD. La Canada, CA: DCW Industries, Inc, November, (2006). [32] H. Zhu, Y. Zhao, T. Zhou, Numerical investigation of the vortex-induced vibration of an elliptic cylinder free-to-rotate about its center, Journal of Fluids and Structures, 83 (2018) 133-155. [33] E. Izadpanah, Y. Amini, A. Ashouri, A comprehensive investigation of vortex induced vibration effects on the heat transfer from a circular cylinder, International Journal of Thermal Sciences, 125 (2018) 405-418. [34] N. Mahir, Z. Altaç, Numerical investigation of convective heat transfer in unsteady flow past two cylinders in tandem arrangements, International Journal of Heat and Fluid Flow, 29(5) (2008) 1309-1318. [35] A.G. Kravchenko, P. Moin, Numerical studies of flow over a circular cylinder at Re D= 3900, Physics of fluids, 12(2) (2000) 403-417. [36] S.W. Churchill, M. Bernstein, A correlating equation for forced convection from gases and liquids to a circular cylinder in crossflow, (1977). 300-306. [37] J.G. Knudsen, D.L. Katz, R.E. Street, Fluid dynamics and heat transfer, Physics Today, 12 (1959) 40. | ||
|
آمار تعداد مشاهده مقاله: 579 تعداد دریافت فایل اصل مقاله: 488 |
||
