A review of the various effects of a vacuum environment on the fatigue behavior of metals

[1] C.M. Hudson, S.K. Seward, A literature review and inventory of the effects of environment on the fatigue behavior of metals, Engineering Fracture Mechanics, 8(2) (1976) 315-329.

[2] N. Grinberg, The effect of vacuum on fatigue crack growth, International Journal of Fatigue, 4(2) (1982) 83-95.

[3] B. Huneau, J. Mendez, Evaluation of environmental effects on fatigue crack growth behavior of a high-strength steel in a saline solution with cathodic protection, International Journal of fatigue, 28(2) (2006) 124-131.

[4] T. Kakiuchi, Y. Uematsu, Y. Hatano, M. Nakajima, Y. Nakamura, T. Taniguchi, Effect of hydrogen on fatigue crack propagation behavior of wrought magnesium alloy AZ61 in NaCl solution under controlled cathodic potentials, Engineering Fracture Mechanics, 137 (2015) 88-96.

[5] Y. Murakami, S. Matsuoka, Effect of hydrogen on fatigue crack growth of metals, Engineering Fracture Mechanics, 77(11) (2010) 1926-1940.

[6] W. Zhu, K. Minakawa, A. McEvily, On the influence of the ambient environment on the fatigue crack growth process in steels, Engineering Fracture Mechanics, 25(3) (1986) 361-375.

[7] J. Burns, J. Jones, A. Thompson, J.W. Locke, Fatigue crack propagation of aerospace aluminum alloy 7075-T651 in high altitude environments, International Journal of Fatigue, 106 (2018) 196-207.

[8] D. Wan, Y. Ma, B. Sun, N. Razavi, D. Wang, X. Lu, W. Song, Evaluation of hydrogen effect on the fatigue crack growth behavior of medium-Mn steels via in-situ hydrogen plasma charging in an environmental scanning electron microscope, Journal of Materials Science & Technology, 85 (2021) 30-43.

[9] T.T. Nguyen, H.M. Heo, J. Park, S.H. Nahm, U.B. Beak, Fracture properties and fatigue life assessment of API X70 pipeline steel under the effect of an environment containing hydrogen, Journal of Mechanical Science and Technology, 35(4) (2021) 1445-1455.

[10] J. Burns, R. Bush, J. Ai, J. Jones, Y. Lee, R. Gangloff, Effect of water vapor pressure on fatigue crack growth in Al–Zn–Cu–Mg over wide-range stress intensity factor loading, Engineering Fracture Mechanics, 137 (2015) 34-55.

[11] F. Yoshinaka, T. Nakamura, K. Takaku, Effects of vacuum environment on small fatigue crack propagation in Ti–6Al–4V, International Journal of Fatigue, 91 (2016) 29-38.

[12] A.H. Rosenberger, The effect of partial vacuum on the fatigue crack growth of nickel base superalloys, Superalloys 2004,  (2004) 233-239.

[13] X.-s. Wang, J.-h. Fan, An evaluation on the growth rate of small fatigue cracks in cast AM50 magnesium alloy at different temperatures in vacuum conditions, International Journal of fatigue, 28(1) (2006) 79-86.

[14] R. Wanhill, Fatigue crack initiation in aerospace aluminum alloys, components and structures,  (2006).

[15] T. Dursun, C. Soutis, Recent developments in advanced aircraft aluminum alloys, Materials & Design (1980-2015), 56 (2014) 862-871.

[16] C.M. Hudson, Problems of fatigue of metals in a vacuum environment, GOVT REP,  (1965) 24.

[17] A. Junet, A. Messager, A. Weck, Y. Nadot, X. Boulnat, J.-Y. Buffiere, Internal fatigue crack propagation in a Ti-6Al-4V alloy: An in situ study, International Journal of Fatigue, 168 (2023) 107450.

[18] L. Wang, J. Liang, G. Fang, High temperature fracture behavior of ZrB2–SiC–graphite composite in vacuum and air, Journal of Alloys and Compounds, 619 (2015) 145-150.

[19] R. Alain, P. Violan, J. Mendez, Low cycle fatigue behavior in vacuum of a 316L type austenitic stainless steel between 20 and 600 C Part I: Fatigue resistance and cyclic behavior, Materials Science and Engineering: A, 229(1-2) (1997) 87-94.

[20] R. Cooke, P. Irving, G. Booth, C. Beevers, The slow fatigue crack growth and threshold behavior of a medium carbon alloy steel in air and vacuum, Engineering Fracture Mechanics, 7(1) (1975) 69-77.

[21] M. Wzorek, A. Czerwinski, J. Ratajczak, A. Misiuk, J. Kątcki, Hydrostatic pressure effect on dislocation evolution in self-implanted Si investigated by electron microscopy methods, Vacuum, 81(10) (2007) 1229-1232.

[22] Y. Iino, Effects of high-temperature air and vacuum exposure on tensile properties and fracture of ODS alloy MA6000, Materials Science and Engineering: A, 234 (1997) 802-805.

[23] Q. Wang, X. Wang, N. Zhang, Investigation of the fatigue damage mechanism of Inconel 617 at elevated temperatures obtained by in situ SEM fatigue tests, International Journal of Fatigue, 153 (2021) 106518.

[24] L. Coffin, The effect of high vacuum on the low cycle fatigue law, Metallurgical and Materials Transactions B, 3 (1972) 1777-1788.

[25] A.W. Thompson, Z.D. Harris, J.T. Burns, On the low temperature fatigue crack growth behavior of AA7075-T651 in ultra-high vacuum environments, International Journal of Fatigue, 178 (2024) 107988.

[26] Y. Wu, Y. Lo, Surface protection for AA8090 aluminum alloy by diffusion bonding, Theoretical and applied fracture mechanics, 38(1) (2002) 71-79.

[27] R. Pippan, G. Haas, H. Stüwe, Comparison of two methods to measure crack closure in ultra-high vacuum, Engineering fracture mechanics, 34(5-6) (1989) 1075-1084.

[28] T. Nakamura, H. Oguma, Y. Shinohara, The effect of vacuum-like environment inside sub-surface fatigue crack on the formation of ODA fracture surface in high strength steel, Procedia Engineering, 2(1) (2010) 2121-2129.

[29] T. Ogawa, S.E. Stanzl-Tschegg, B.M. Schönbauer, A fracture mechanics approach to interior fatigue crack growth in the very high cycle regime, Engineering Fracture Mechanics, 115 (2014) 241-254.

[30] A. Ueno, S. Miyakawa, K. Yamada, T. Sugiyama, Fatigue behavior of die casting aluminum alloys in air and vacuum, Procedia Engineering, 2(1) (2010) 1937-1943.

[31] H. Shen, S. Podlaseck, I. Kramer, Effect of vacuum on the fatigue life of aluminum, Acta Metallurgica, 14(3) (1966) 341-346.

[32] J. Jones, M. McMurtrey, L. Brown, J. Burns, The effect of crack wake roughness on the environmentally assisted fatigue behavior of an aerospace Al-alloy in low moisture environments, Engineering Fracture Mechanics, 199 (2018) 343-357.

[33] I. Chiaki, S. Yoshihide, Static fatigue crack propagation behavior of glass in a vacuum, Engineering fracture mechanics, 46(5) (1993) 825-833.

[34] K. Minoshima, Y. Maekawa, K. Komai, The influence of vacuum on fracture and fatigue behavior in a single aramid fiber, International Journal of Fatigue, 22(9) (2000) 757-765.

[35] Z. Ismarrubie, H. Yussof, M. Sugano, Fatigue damage mechanism of titanium in vacuum and in air, Procedia Engineering, 41 (2012) 1559-1565.

[36] M. Ghammouri, M. Abbadi, J. Mendez, Microstructure evolution during cycling in vacuum and air environments: Correlation with mechanical behavior, International Journal of Fatigue, 56 (2013) 123-129.

[37] W. Jiang, Z. Fan, D. Liu, D. Liao, X. Dong, X. Zong, Correlation of microstructure with mechanical properties and fracture behavior of A356-T6 aluminum alloy fabricated by expendable pattern shell casting with vacuum and low-pressure, gravity casting, and lost foam casting, Materials Science and Engineering: A, 560 (2013) 396-403.

[38] M.D.a.A. Dhingra, Rolling Contact Fatigue in a Vacuum: Test Equipment and Coating Analysis, Springer; Softcover reprint of the original 1st ed. 2015 edition (October 1, 2016), 2016.

[39] W. Evans, J. Jones, S. Williams, The interactions between fatigue, creep and environmental damage in Ti 6246 and Udimet 720Li, International Journal of Fatigue, 27(10-12) (2005) 1473-1484.

[40] A. Vasudevan, K. Sadananda, A viewpoint on environmental contributions to fatigue crack growth, International Journal of Materials and Product Technology, 30(1-3) (2007) 3-16.

[41] F. Yoshinaka, G. Xue, N. Fujimura, T. Nakamura, Effect of vacuum pressure on small crack propagation in Ti-6Al-4V, International Journal of Fatigue, 142 (2021) 105961.

[42] N. Ranganathan, J. Petit, B. Bouchet, A contribution to the study of fatigue crack retardation in vacuum, Engineering Fracture Mechanics, 11(4) (1979) 775-789.

[43] A. Alekseev, Slip character and fatigue life of copper single crystals in air and in vacuum, International Journal of Fatigue, 3(3) (1981) 129-132.

[44] A. McEvily, J. Gonzalez, J. Hallen, Dislocation substructures at fatigue crack tips of 304 stainless steel cycled in air or vacuum, International Journal of Fatigue, 10(19) (1997) 735.

[45] M. Zhao, W. Gu, D.H. Warner, Atomic mechanism of near-threshold fatigue crack growth in vacuum, Nature Communications, 13(1) (2022) 812.

[46] V. Tokii, V. Zaitsev, Hydrostatic pressure effect on dislocations, physica status solidi (a), 12(1) (1972) 53-60.

[47] J. Hanafee, S. Radcliffe, Effect of hydrostatic pressure on dislocation mobility in lithium fluoride, Journal of Applied Physics, 38(11) (1967) 4284-4294.

[48] R. Carter, E. Lee, E. Starke, C. Beevers, The effect of microstructure and environment on fatigue crack closure of 7475 aluminum alloy, Metallurgical Transactions A, 15 (1984) 555-563.

[49] P. Szalva, I.N. Orbulov, Influence of vacuum support on the fatigue life of AlSi9Cu3 (Fe) aluminum alloy die castings, Journal of Materials Engineering and Performance, 29(9) (2020) 5685-5695.

[50] M. Lafarie‐Frenot, J. Petit, C. Gasc, A contribution to the study of fatigue crack closure in vacuum, Fatigue & Fracture of Engineering Materials & Structures, 1(4) (1979) 431-438.

[51] M. Iguchi, M. Saito, Structural and fracture mechanics analysis of ITER vacuum vessel, Fusion engineering and design, 82(15-24) (2007) 2029-2034.

[52] J. Li, A. Feng, J. Zhou, H. Chen, Y. Sun, X. Tian, Y. Huang, S. Huang, Enhancement of fatigue properties of 2024-T351 aluminum alloy processed by cryogenic laser peening, Vacuum, 164 (2019) 41-45.

[53] F. Antunes, P. Prates, D. Camas, C. Sarrazin-Baudoux, C. Gardin, Numerical prediction of fatigue threshold of metallic materials in vacuum, Engineering Fracture Mechanics, 216 (2019) 106491.

[54] S. Madhukarϯ, B.R.H. Reddy, G.A. Kumarϯ, R.P. Naikϯ, A study on improvement of fatigue life of materials by surface coatings, Int. J. Curr. Eng. Technol, 8 (2018) 5-9.

[55] Y. Liu, Y. Chen, C. He, F. Liu, K. Yang, L. Li, H. Zhang, C. Wang, Q. Wang, Vacuum retarding and air accelerating effect on the high-cycle and very-high-cycle fatigue behavior of a ZK60 magnesium alloy, Materials & Design, 198 (2021) 109310.

[56] L. Zhang, R. Jiang, Y. Wang, L. Zhang, J. Liu, Y. Zhang, Y. Song, Effects of microstructure and temperature on short fatigue crack propagation behavior of powder metallurgy superalloy FGH4098 in vacuum, Materials Science and Engineering: A, 852 (2022) 143637.

[57] Y. Nadot, Fatigue from defect: influence of size, type, position, morphology and loading, International Journal of Fatigue, 154 (2022) 106531.

[58] C.M. Barr, T. Duong, D.C. Bufford, Z. Milne, A. Molkeri, N.M. Heckman, D.P. Adams, A. Srivastava, K. Hattar, M.J. Demkowicz, Autonomous healing of fatigue cracks via cold welding, Nature, 620(7974) (2023) 552-556.