پیوندهای مفید
آمار
| تعداد نشریات | 7 |
| تعداد شماره‌ها | 399 |
| تعداد مقالات | 5,389 |
| تعداد مشاهده مقاله | 5,288,167 |
| تعداد دریافت فایل اصل مقاله | 4,882,893 |
شبیه‌سازی عددی عملکرد سایکلون گاز - جامد در دماهای بالا | ||
| نشریه مهندسی مکانیک امیرکبیر | ||
| مقاله 6، دوره 49، شماره 3، آبان 1396، صفحه 495-506 اصل مقاله (1.43 M) | ||
| نوع مقاله: مقاله پژوهشی | ||
| شناسه دیجیتال (DOI): 10.22060/mej.2016.860 | ||
| نویسندگان | ||
| معین سیادتی؛ سعید خردمند* | ||
| دانشکده مهندسی مکانیک و هوا فضا، دانشگاه صنعتی مالک اشتر اصفهان، اصفهان، ایران | ||
| چکیده | ||
| بر خلاف هندسه ساده‌ی سایکلون‌ها، جریان درون آن‌ها بسیار پیچیده است. یکی از عواملی که این پیچیدگی را چند برابر می‌کند، تغییر درافت فشار جریان و راندمان جمع‌آوری ذرات جامد بر اثر تغییر دمای کاری آن است. دمای سیال یکی از پارامترهای تاثیرگذار بر رفتار جریان است. تغییر دمای سیال موجب تغییر خواص ترموفیزیکی و درنتیجه تغییر در الگوهای جریانی آن می‌شود. در این مقاله، اثر دمای سیال ورودی بر دو مشخصه عملکردی مهم سایکلون استیرماند راندمان بالا، افت فشار و راندمان جداسازی، با استفاده از اصول دینامیک سیالات محاسباتی موردمطالعه قرار گرفته است. جریان دوفازی درون سایکلون با رویکرد اویلری – لاگرانژی مدل‌سازی شد. شبیه‌سازی در محدوده‌ی دمایی 700-293 کلوین و در چهار سرعت ورودی مختلف با استفاده از روش حجم محدود به کمک مدل تلاطمی تنش رینولدز در شرایط نا پایا انجام شد. بررسی نتایج نشان می‌دهد که با افزایش دما، میزان چرخش ذرات و جریان در بدنه‌ی سایکلون کاهش‌یافته و درنتیجه، راندمان و افت فشار کاهش می یابند. به ازای هر 100 کلوین افزایش دما، بین 14% تا 16% کاهش افت فشار در دبی‌های مختلف مشاهده می‌شود. همچنین راندمان جمع‌آوری ذرات هم بین بیشینه و کمینه‌ی دما، حداکثر 64/4% کاهش می‌یابد. | ||
| کلیدواژه‌ها | ||
| سایکلون استیرماند؛ دینامیک سیالات محاسباتی؛ دما؛ افت فشار؛ راندمان جمع آوری ذرات جامد | ||
| عنوان مقاله [English] | ||
| Numerical Simulation of Gas – Solid Cyclone Separators Operating at High Temperatures | ||
| نویسندگان [English] | ||
| M. Siadaty؛ S. Kheradmand | ||
| Mechanical and Aerospace Engineering Department, Malek - Ashtar University of Technology, Shahinshahr, Isfahan, Iran | ||
| چکیده [English] | ||
| Although cyclones have simple geometries their flow is really complicated. Inlet fluid temperature is one of the factors that increases its complexity. Variation of the thermo-physical properties of the working fluid with temperature causes cyclones to have different pressure drop and particle separation efficiency. In this paper, the effect of fluid and particles temperature on two main performance parameters (pressure drop and separation efficiency) of low-mass-loading Stairmand high efficiency cyclone are numerically investigated. Eulerian-Lagrangian approach is used to model twophase flow. Simulation is performed at a temperature range of 293-700 K and four inlet velocities. Also, the turbulent equations are solved with unsteady Reynolds stress method. Results show that increasing in dynamic viscosity due to increase in fluid temperature, causes increment in shear stress in cyclone body. Therefore, separation efficiency and pressure drop are decreased. If the inlet flow temperature increases by 100 K, pressure drop decreases between 14% and 16% at different inlet velocities. Also, separation efficiency is decreased by 4.64% between the minimum and maximum of inlet temperatures. | ||
| کلیدواژه‌ها [English] | ||
| High efficiency Stairmand cyclone, Computational fluids dynamics, Temperature, Pressure drop, EFFICIENCY | ||
|
سایر فایل های مرتبط با مقاله
|
||
| مراجع | ||
|
[1] Y. Zhu, K. Lee, “Experimental study on small cyclones operating at high flow rates”. Journal of Aerosol Science,30(10) (1999) 1303-1315. [2] K. Lim, H. Kim, K. Lee, “Characteristics of the collection efficiency for a cyclone with different vortex finder shapes”. Journal of Aerosol science, 35(6) (2004) 743-754. [3] J. Dirgo, D. Leith, “Cyclone collection efficiency:comparison of experimental results with theoretical predictions”. Aerosol cience and Technology, 4(4)(1985) 401-415. [4] J. Gimbun, T. Chuah, T.S. Choong, A. Fakhru’l-Razi,“Prediction of the effects of cone tip diameter on the cyclone performance”. Journal of Aerosol Science, 36(8)(2005) 1056-1065. [5] K. Elsayed, C. Lacor, “Optimization of the cyclone separator geometry for minimum pressure drop using mathematical models and CFD simulations”. Chemical Engineering Science, 65(22) (2010) 6048-6058. [6] K. Elsayed, C. Lacor, “Modeling, analysis and optimization of aircyclones using artificial neural network, response surface methodology and CFD simulation approaches”. Powder technology, 212(1)(2011) 115-133. [7] G. Gong, Z. Yang, S. Zhu, “Numerical investigation of the effect of helix angle and leaf margin on the flow pattern and the performance of the axial flow cyclone separator”. Applied mathematical modelling, 36(8)(2012) 3916-3930. [8] H. Safikhani, A. Hajiloo, M. Ranjbar, “Modeling and multi-objective optimization of cyclone separators using CFD and genetic algorithms”. Computers & Chemical Engineering, 35(6) (2011) 1064-1071. [9] K. Elsayed, C. Lacor, “CFD modeling and multiobjective optimization of cyclone geometry using desirability function, artificial neural networks and genetic algorithms”. Applied Mathematical Modelling,37(8) (2013) 5680-5704. [10] M. Azadi, M. Azadi, A. Mohebbi, “A CFD study of the effect of cyclone size on its performance parameters”.Journal of hazardous materials, 182(1) (2010) 835-841. [11] P. Baltrėnas, A. Chlebnikovas, “Experimental research on the dynamics of airflow parameters in a six-channel cyclone-separator”. Powder Technology, 283 (2015)328-333. [12] P. Funk, K. Elsayed, K. Yeater, G. Holt, D. Whitelock,“Could cyclone performance improve with reduced inlet velocity?”. Powder technology, 280 (2015) 211-218. [13] N. Fathizadeh, A. Mohebbi, S. Soltaninejad, M.Iranmanesh, “Design and simulation of high pressure cyclones for a gas city gate station using semi-empirical models, genetic algorithm and computational fluid dynamics”. Journal of Natural Gas Science and Engineering, 26 (2015) 313-329. [14] L.S. Brar, R. Sharma, K. Elsayed, “The effect of the cyclone length on the performance of Stairmand highefficiency cyclone”. Powder Technology, 286 (2015)668-677. [15] D. Misiulia, A.G. Andersson, T.S. Lundström, “Effects of the inlet angle on the flow pattern and pressure drop of a cyclone with helical-roof inlet”. Chemical engineering research and design, 102 (2015) 307-321. [16] L. Duan, X. Wu, Z. Ji, Q. Fang, “Entropy generation analysis on cyclone separators with different exit pipe diameters and inlet dimensions”. Chemical Engineering Science, 138 (2015) 622-633. [17] B. Zhao, H. Shen, Y. Kang, “Development of a symmetrical spiral inlet to improve cyclone separator performance”. Powder Technology, 145(1) (2004) 47-50. [18] H. Safikhani, M. Shams, S. Dashti, “Numerical simulation of square cyclones in small sizes”. Advanced Powder Technology, 22(3) (2011) 359-365. [19] Y. Su, A. Zheng, B. Zhao, “Numerical simulation of effect of inlet configuration on square cyclone separator performance”. Powder technology, 210(3) (2011) 293-303. [20] I. Karagoz, F. Kaya, “CFD investigation of the flow and heat transfer characteristics in a tangential inlet cyclone”, International Communications in Heat and Mass Transfer, 34(9) (2007) 1119-1126. [21] J. Gimbun, T. Chuah, A. Fakhru’l-Razi, T.S. Choong, “The influence of temperature and inlet velocity on cyclone pressure drop: a CFD study”. Chemical Engineering and Processing: Process Intensification,44(1) (2005) 7-12. [22] C. Shepherd, C. Lapple, Air pollution control: a design approach, Cyclones. Second ed., Woveland Press Inc., Illinois, (1939) 127-139. [23] C. Song, B. Pei, M. Jiang, B. Wang, D. Xu, Y. Chen,“Numerical analysis of forces exerted on particles in cyclone separators”. Powder Technology, 294 (2016)437-448. [24] Y.H. Alahmadi, A.F. Nowakowski, “Modified shear stress transport model with curvature correction for the prediction of swirling flow in a cyclone separator”.Chemical Engineering Science, 147 (2016) 150-165. [25] M. Masihi, H. Karegar Sharifabad, N. Rahbar, “Numerical simulation of gas-solid cyclone to reduce the air pollution”, in: 22nd international conference of Iranian society of mechanical engineers (ISME), Ahvaz,Iran, 2014. [26] K. Khaksar, N. Moafian, M. Ehsani, M. Ghiath,“Analysis of outlet channel configuration on spiral cyclone”, in: 1st conference of oil, gas and Persian Gulf petrochemical, Busherhr, Iran, 2016. [27] M. Khandani, “Necessity of using cyclones at natural gas stations”, in: 2nd national conference of knowledgebased improvements of oil, gas and petrochemical industries, Bandare Emam, Iran, 2015. [28] M. Farzanehgard, S. Alenabi, “Separation of soot from natural gas at gas stations using cyclones”, in: 3rd conference of applied studies at power engineering,mechanical engineering and mechatronics, Tehran, Iran,2015. [29] S. Shafiei, M. S. Torkesh Esfahani, H. Ajamian, M.Ilchizadeh, “Effects of operational and design parameters on powder classification using cyclones and deposition tank”, Sciences and engineering of separation, 1 (2)2010 41-54. [30] A. Farzanegan, Z. Mirzaei, “Single objective optimization of Aspheric Phosphate mill circuit using genetic algorithm”, modelling in engineering, 11 (33)2013 15-25. [31] A. Fluent, Ansys fluent theory guide, ANSYS Inc.,USA, 15317 (2011) 724-746. [32] S. Morsi, A. Alexander, “An investigation of particle trajectories in two-phase flow systems”, Journal of Fluid Mechanics, 55(2) (1972) 193-208. [33] L. Talbot, R. Cheng, R. Schefer, D. Willis,“Thermophoresis of particles in a heated boundary layer”. Journal of fluid mechanics, 101(4) (1980) 737-758. [34] B. Zhao, Y. Su, J. Zhang, “Simulation of gas flow pattern and separation efficiency in cyclone with conventional single and spiral double inlet configuration”. Chemical Engineering Research and Design, 84(12) (2006) 1158-1165. [35] A.C. Hoffman, L.E. Stein, A.C. Hoffmann, L.E. Stein, Gas cyclones and swirl tubes, Springer, 2002. | ||
|
آمار تعداد مشاهده مقاله: 1,333 تعداد دریافت فایل اصل مقاله: 2,901 |
||
