انتخاب طرح اختلاط بهینه با استفاده همزمان از الیاف بازیافتی فولادی و سنگدانه‌های بازیافتی بتنی با تاکید بر مقاومت اولیه سنگدانه‌ها

[1] M. Ahmadi, A. Hasani, M. Soleymani., Role of Recycled Steel Fibers from Tires on Concrete Containing Recycled Aggregate from Building Waste, Concrete research journal. 7 (2) (2014) 57–68. (In Persian)

[2] N. D. Oikonomou., Recycled concrete aggregates, Cem Concr Compos. 27 (2) (2005) 315–318.

[3] C. A. Carneiro, P. R. L. Lima, M. B. Leite, R. D. T. Filho., Compressive stress–strain behavior of steel fiber reinforced-recycled aggregate concrete, Cement and Concrete Composites. 46 (2017) 886–893.

[4] R. Chan, X. Liu, I. Galobardes., Parametric study of functionally graded concretes incorporating steel fibres and recycled aggregates, Construction and Building Materials. 242 (2020) 118186.

[5] A. Sahraei Moghadam, F. Omidinasab, S. Moazami Goodarzi., Characterization of concrete containing RCA and GGBFS: Mechanical, microstructural and environmental properties, Construction and Building Materials. 289 (2021) 123134.

[6] M. Leone, F. Micelli, M.A. Aiello, G. Centonze, D. Colonna., Experimental study on bond behavior in fiber-reinforced concrete with low content of recycled steel fiber, J. Mater. Civ. Eng. 28 (9) (2016) 87–99.

[7] M. Jalal., Compressive strength enhancement of concrete reinforced by waste steel fibers utilizing nano SiO2, Middle East J. Sci. Res. 12 (3) (2012) 382–391.

[8] L. Lourenco, Z. Zamanzadeh, J.A.O. Barros, M. Rezazadeh., Shear strengthening of RC beams with thin panels of mortar reinforced with recycled steel fibres, J. Clean.Prod. 194 (2018) 112–126.

[9] A. Caggiano, P. Folino, C. Lima, E. Martinelli, M. Pepe., On the mechanical response of Hybrid Fiber Reinforced Concrete with Recycled and Industrial Steel Fibers, Constr. Build. Mater. 147 (2017) 286–295.

[10] M. Mastali, A. Dalvand., Use of silica fume and recycled steel fibers in self-compacting concrete (SCC), Constr. Build. Mater. 125 (2016) 196–209.

[11] G. Centonze, M. Leone, M.A. Aiello., Steel fibers from waste tires as reinforcement in concrete: a mechanical characterization, Constr. Build. Mater. 36 (2012) 46–57.

[12] V. Revilla-Cuesta, V. Ortega-López, M. Skaf, J. Manuel Manso., Effect of fine recycled concrete aggregate on the mechanical behavior of self-compacting concrete, Construction and Building Materials. 263 (2020) 120671.

[13] A. B. Ajdukiewicz, A. T. Kliszczewicz., Comparative tests of beams and columns made of recycled aggregate concrete and natural aggregate concrete, J. Adv. Concr. Technol. 5 (2) (2007) 259–273.

[14] S. Yang., Effect of different types of recycled concrete aggregates on equivalent concrete strength and drying shrinkage properties, Applied Sciences. 8 (2016) 2190.

[15] V. Afroughsabet, L. Biolzi, T. Ozbakkaloglu., Influence of double hooked-end steel fibers and slag on mechanical and durability properties of high performance recycled aggregate concrete, Composite Structures. 181 (2017) 273–-284.

[16] M. L. V. Prasad, R. Kumar., Mechanical Propertis of fiber Reinforced Concretes Produced from Building Demolished Waste, Environmental Researh And Development. 2 (2) (2007) 180 –187.

[17] H. R. Chaboki, M. Ghalehnovi, A. Karimipour, J. Brito., Experimental study on the flexural behaviour and ductility ratio of steel fibres coarse recycled aggregate concrete beams, Construction and Building Materials. 186 (2018) 400–422.

[18] M. Mastali, A. Dalvand, A. R. Sattarifard, Z. Abdollahnejad, B. Nematollahi, J. G. Sanjayan, M. Illikainen., A comparison of the effects of pozzolanic binders on the hardened-state properties of high-strength cementitious composites reinforced with waste tire fibers, Compos. Pt. B-Eng. 162 (2019) 134–153.

[19] E. Martinelli, A. Caggiano, H. Xargay., An experimental study on the post-cracking behaviour of hybrid industrial/recycled steel fiber-reinforced concrete, Construct Build Mater. 94 (2015) 290–298.

[20] O. Sengul., Mechanical behavior of concretes containing waste steel fibers recovered from scrap tires, Construct Build Mater. 122 (2016) 649–658.

[21] ASTM C 39/C 39M-03 (2003). “Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens.”

[22] ASTM C150 (2012). “Standard Specification for Portland Cement.”

[23] A. Sahraei Moghadam, F. Omidinasab, A. Dalvand., Experimental investigation of (FRSC) cementitious composite functionally graded slabs under projectile and drop weight impacts, Construction and Building Materials. 237 (2020) 117522.

[24] A. Sahraei Moghadam, F. Omidinasab., Assessment of hybrid FRSC cementitious composite with emphasis on flexural performance of functionally graded slabs, Construction and Building Materials. 250 (2020) 118904.

[25] A. Sahraei Moghadam, F. Omidinasab., Flexural and impact performance of functionally graded reinforced cementitious composite (FGRCC) panels, structures. 29 (2021) 1723–1733.

[26] F. Omidinasab, A. Sahraei Moghadam., Effect of Purposive Distribution of Fibers to Prevent the Penetration of Bullet in Concrete Walls, KSCE J Civ Eng. 25 (3) (2021) 843-483.

[27] M. Pajak, T. Ponikiewski., Flexural behavior of self-compacting concrete reinforced with different types of steel fibers, Constr. Build. Mater. 47 (2013) 397–408.

[28] D. Burchart-Korol., Life cycle assessment of steel production in Poland: a case study, J. Clean. Prod. 54 (2013) 235–243.

[29] V. G. Ghorpade, H. Sudarsana Rao., Strength and permeability characteristics of Fibre reinforced recycled aggregate concrete with different fibres, Nat. Environ. Pollut. Technol. 9 (1) (2010) 179–188.

[30] N. Taranu, R. Andrei, L. Dumitrescu, S. G. Maxineasa., Using Recycled Components from Post-Consumer Tyres in Construction Materials Industry, Geoconference on Energy and Clean Technologies, Stef92 Technology Ltd, Sofia. (2014) 259–264.

[31] A. Caggiano, P. Folino, C. Lima, E. Martinelli, M. Pepe., On the mechanical response of Hybrid Fiber Reinforced Concrete with Recycled and Industrial Steel Fibers, Constr. Build. Mater. 147 (2017) 286–295.

[32] M. H. Sotoudeh, M. Jalal., Effects of waste steel fibers on strength and stress strain behavior of concrete incorporating silica nanopowder, Indian J. Sci. Technol. 6 (11) (2013) 5411–5417.

[33] D. Atoyebi Olumoyewa, O. Odeyemi Samson, A. Bello Sefiu, O. Ogbeifun Cephas., Splitting tensile strength assessment of lightweight foamed concrete reinforced with waste tyre steel fibres, Int. J. Civ. Eng. Technol. 9 (9) (2018) 1129–1137.

[34] M. A. Aiello, F. Leuzzi, G. Centonze, A. Maffezzoli., Use of steel fibres recovered from waste tyres as reinforcement in concrete: pull-out behaviour, compressive and flexural strength, Waste Manage. 29 (6) (2009) 1960–1970.

[35] K. Aghaee, M. A. Yazdi, K. D. Tsavdaridis., Investigation into the mechanical properties of structural lightweight concrete reinforced with waste steel wires, Mag. Concr. Res. 67 (4) (2015) 197–205.

[36] Z. Al-Kamyani, F. P. Figueiredo, H. Hu, M. Guadagnini, K. Pilakoutas., Shrinkage and flexural behaviour of free and restrained hybrid steel fibre reinforced concrete, Constr. Build. Mater. 189 (2018) 1007–1018.

[37] M. D. J. Sanchez, P. A. Gutierrez., Study on the influence of attached mortar content on the properties of recycled concrete aggregate, Construction and building materials. 23 (2009) 872–877.

[38] M. Pepe, R. D. Toledo Filho, E. A. Koenders, E. Martinelli., Alternative processing procedures for recycled aggregates in structural concrete, Construction and Building Materials. 69 (2014) 124–132.

[39] ASTM C125-19, Standard Terminology Relating to Concrete and Concrete Aggregates, ASTM International, West Conshohocken, PA, 2019.

[40] ASTM C131 / C131M-14 (2006). “Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine.”

[41] ASTM C 143/C 143M-15a (2015). “Standard Test Method for Slump of Hydraulic-Cement Concrete.”

[42] ASTM C 642-13 (2013). “Standard Test Method for Density, Absorption, and Voids in Hardened Concrete.”

[43] BS 1881 - Part 201 \Guide to the use of nondestructive methods of test for hardened concrete", British Standards Institution (2009).

[44] ASTM C 496/C 496M-11 (2011). “Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens.”

[45] ASTM C1609 / C1609M-19 (2019). “Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam with Third-Point Loading).”

[46] K. Akhavan Kazemi, O. Eren, A. R. Rezaei., Some mechanical properties of normal and recycled aggregate concretes, Scientia Iranica A. 22 (6) (2015) 1972-1980.

[47] H. Sasanipour, F. Aslani, J. Taherinezhad., Effect of silica fume on durability of self-compacting concrete made with waste recycled concrete aggregates, Construction and Building Materials. 227 (2019) 116598.

[48] G. Centonze, M. Leone, F. Micelli, D. Colonna, M. A. Aiello., Concrete reinforced with recycled steel fibers from end of life tires: Mix-design and application, Key Eng. Mater. 59 (2016) 224–231.

[49] M. E. Oliveira, C. S. Assis, A. W. Terni., Study on compressed stress, water absorption and modulus of elasticity of produced concrete made by recycled aggregate, In Interantional RILEM Conference on the Use of recycled Materials and Structures. (2008) 636– 642.

[50] D. Matias, J. De Brito, A. Rosa, D. Pedro., Durability of concrete with recycled coarse aggregates: influence of superplasticizers, Journal of materials in civil engineering. 26 (7) (2014) 06014011.

[51] M. Mansur, Ö. Çakır., An Investigation on Mechanical and Physical Properties of Recycled Coarse Aggregate (RCA) Concrete with GGBFS, Int J Civ Eng .15 (4) (2017) 549–563.

[52] J. R. Correia, J. De Brito, A. S. Pereira., Effects on concrete durability of using recycled ceramic aggregates, Materials and Structures. 39 (2) (2006) 169–177.

[53] M. Bravo, J. De Brito, J. Pontes, L. Evangelista., Durability performance of concrete with recycled aggregates from construction and demolition waste plants, Construction and Building Materials. 77 (2015) 357–369.

[54] H. Chao-Lung, B. L. Anh-Tuan, C. Chun-Tsun., Effect of rice husk ash on the strength and durability characteristics of concrete, J. Constr. Build. Mater. 25 (2011) 3768–3772.

[55] A. Khaloo, A. Esrafili, M. Kalani, M. H. Mobini., Use of polymer fibres recovered from waste car timing belts in high performance concrete, J Const Building Materials. 80 (2015) 31–37.

[56] E. A. Whitehurst., Soniscope tests concrete structures, Journal of the American Concrete Institute, 47 (1951) 443–444.

[57] S. W. Tabsh, A. S. Abdelfatah., Influence of recycled concrete aggregates on strength properties of concrete, Constr Build Mater. 23 (2009) 1163–1167.

[58] F. T. Olorunsogo, N. Padayachee., Performance of recycled aggregate concrete monitored by durability indexes, Cem Concr Res. 32 (2002) 179–185.

[59] A. Ajdukiewicz, A. Kliszczewicz., Influence of recycled aggregates on mechanical properties of HS/HPC. Cement Concrete Compos. 24 (2002) 269–79.

[60] J. Krolo, D. Damjanovic, I. Duvnjak, D. Bjegovic, S. Lakusic, A. Baricevic., Innovative low cost fibre-reinforced concrete – part II: fracture toughness and impact strength, Concrete Repair, Rehabilitation and Retrofitting III, in: Proceedings of the 3rd International Conference on Concrete Repair, Rehabilitation and Retrofitting, ICCRRR (2012) 204–209.

[61] G. F. Peng, X. J. Niu, Q. Q. Long., Experimental study of strengthening and toughening for recycled steel fiber reinforced ultra-high performance concrete, Key Eng. Mater. 629 (2014) 104–111.

[62] F. A. Fauzan, R. Ismail, Z. Sandi, A. l. Jauhari., The influence of steel fibers extracted from waste tire on properties of concrete containing fly ash, Int. J. Adv. Sci. Eng. Inf. Technol. 7 (6) (2017) 2232–2236.

[63] A. M. Wagih, H. Z. El-Karmoty, M. Ebid, S. H. Okba., Recycled construction and demolition concrete waste as aggregate for structural concrete, Housing and Building National Research Center. 9 (2013) 193–200.

[64] Y. Hua, Z. Tang, W. Li, Y. Li, V. W. Y. Tamd., Physical-mechanical properties of fly ash/GGBFS geopolymer composites with recycled aggregates, Construction and Building Materials. 226 (2019) 139–151.

[65] F. Bayramov, C. Tasdemir, M. A. Tasdemir., Optimization of fibre reinforced concretes by means of statistical response surface method, Cement Concr Compos. 26 (2004) 665–675.

[66] W. F. Smith., Experimental design for formulation, American Statistical Association. (2005).

[67] O. Sengul, M. A. Tasdemir., Compressive strength and rapid chloride permeability of concretes with ground fly ash and slag, Mater Civ Eng. 21 (2009) 494–501.

[68] M. Mastali, Z. Abdollahnejad, F. Pacheco-Torgal., Carbon dioxide sequestration on fly ash/waste glassalkali-based mortars with recycled aggregates: compressive strength, hydration products, carbon footprint, and cost analysis, Woodhead Publishing Series in Civil and Structural Engineering. (2018) 299–348.

[69] M. Mastali, A. Dalvand, A.R. Sattarifard, Z. Abdollahnejad, M. Illikainena., Characterization and optimization of hardened properties of selfconsolidating concrete incorporating recycled steel, industrial steel, polypropylene and hybrid fibers, Composites Part B. 151 (2018) 186–200.