مدل سازی عددی اغتشاش در جریان احتراقی اسپری دیزل با استفاده از روش شبیه سازی گردابه های بزرگ

[1] Fallah, M., Khaleghi, H., 2003. “Calculations of flows in reciprocating engine chambers with AMS & K-e models”. 1st International conference of computational methods in applied mathematics, Belarus.

[2] C. G. Speziale, "On nonlinear kl and k-ε models of turbulence," Journal of Fluid Mechanics, vol. 178, pp. 459-475, 1987.

[3] T. Craft, B. Launder, and K. Suga, "Development and application of a cubic eddy-viscosity model of turbulence," International Journal of Heat and Fluid Flow, vol. 17, pp. 108-115, 1996.

[4] S. Behzadi and A. Watkins, "Flow and Turbulence Modeling in a Motored Reciprocating Engine using a Cubic Non-linear Turbulence Model," in 4th International Symposium on Engineering Turbulence Modeling, 1999.

[5] B. Amini and H. Khaleghi, "A comparative study of variant turbulence modeling in the physical behaviors of diesel spray combustion," Thermal Science, vol. 15, 2011.

[6] V. Yakhot and L. M. Smith, "The renormalization group, the ɛ-expansion and derivation of turbulence models," Journal of Scientific Computing, vol. 7, pp. 35-61, 1992.

[7] Z. Han and R. D. Reitz, "Turbulence modeling of internal combustion engines using RNG κ-ε models," Combustion science and technology, vol. 106, pp. 267-295, 1995.

[8] G. N. Coleman and N. N. Mansour, "Modeling the rapid spherical compression of isotropic turbulence," Physics of Fluids A: Fluid Dynamics (1989-1993), vol. 3, pp. 2255-2259, 1991.

[9] S. EL TAHRY, "k-epsilon equation for compressible reciprocating engine flows," Journal of Energy, vol. 7, pp. 345-353, 1983.

[10] C. Bajaj, M. Ameen, and J. Abraham, "Evaluation of an unsteady flamelet progress variable model for autoignition and flame lift-off in diesel jets," Combustion Science and Technology, vol. 185, pp. 454-472, 2013.

[11] T. Hori, T. Kuge, J. Senda, and H. Fujimoto, "Large eddy simulation of diesel spray combustion with eddy-dissipation model and CIP method by use of KIVALES," SAE Technical Paper 0148-7191, 2007.

[12] Abraham J. Recent progress in modeling reacting diesel sprays.

[13] B. Hu, C. J. Rutland, and T. A. Shethaji, "A mixed-mode combustion model for large-eddy simulation of diesel engines," Combustion Science and Technology, vol. 182, pp. 1279-1320, 2010.

[14] C. Bekdemir, L. Somers, L. de Goey, J. Tillou, and C. Angelberger, "Predicting diesel combustion characteristics with large-eddy simulations including tabulated chemical kinetics," Proceedings of the Combustion Institute, vol. 34, pp. 3067-3074, 2013.

[15] M. Ameen, V. Magi, and J. Abraham, "Modeling the transient structure of reacting diesel jets using large eddy simulation," in 8th US National Combustion Meeting, University of Utah, 2013.

[16] M. Ameen and J. Abraham, "RANS and LES study of lift-off physics in reacting diesel jets," SAE Technical Paper 0148-7191, 2014.

[17] P. Nordin, Complex chemistry modeling of diesel spray combustion: Chalmers University of Technology, 2001.

[18] D. T. R. J. A. Howarda, "The eddy dissipation combustion model developed for large eddy simulation."

[19] J. Chomiak and A. Karlsson, "Flame liftoff in diesel sprays," in Symposium (International) on Combustion, 1996, pp. 2557-2564.

[20] J. Karlsson, T. Berglind, and J. Chomiak, "Modeling of ignition and combustion of high pressure small orifice diesel sprays using a complex chemical model," in International Symposium COMODIA, 1991, p. 275.

[21] A. A. Amsden and R. Menon, "KIVA3. A KIVA Program with Block-Structured Mesh for Complex Geometries," Silicon Graphics Computer Systems, Mountain View, CA (United States)1993.

[22] Lilly, D. K. (1992). "A proposed modification of the Germano subgrid‐scale closure method." Physics of Fluids A: Fluid Dynamics, 1989-1993, 4(3): 633-635.

[23] M. Klein, J. Meyers, and B. J. Geurts, "Assessment of LES quality measures using the error landscape approach," in Quality and Reliability of Large-Eddy Simulations, ed: Springer, 2008, pp. 131-142.

[24] M. Keshtkar, H. Khaleghi (Supervisor), "Numerical Study of Turbulence in Diesel Spray Combustion Using Large Eddy Simulation", Thesis Submitted in Partial Fulfillment of the Requirements for the Degree of Master of Science (M.Sc.) in Mechanical Engineering, Faculty of Mechanical Engineering, Tarbiat Modares University, 2016. (in Persian).

[25] R. D. Reitz and R. Diwakar, "Effect of drop breakup on fuel sprays," SAE Technical Paper 0148-7191, 1986.

[26] P. O’Rourke and F. Bracco, "Modeling of drop interactions in thick sprays and a comparison withexperiments," Proceedings of the Institution of Mechanical Engineers, vol. 9, pp. 101-106, 1980.

[27] C. Bai and A. Gosman, "Development of methodology for spray impingement simulation," SAE Technical Paper 0148-7191, 1995.

[28] A. Morse, J. Whitelaw, and M. Yianneskis, "Turbulent flow measurements by laser doppler anemometry in a motored reciprocating engine," Imperial College Mechanical Engineering Department Report FS/78/24, 1978.

[29] M. Khoramdel. H. Khaleghi, Gh. Heidarinejad, M.H. Saberimoghadam, "Numerical Analysis of In-Cylinder Flow in Internal Combustion Engines by LES Method," Journal of mechanical Engineering, Amirkabir University, Tehran, 2016. (in Persian).

[30] M. S. Yule AJ, Tham SY, Aval SM, "Diesel spray structure," ICLASS-85, London, UK, 1985 Jul

[31] Available: http://www.sandia.gov/ecn/dieselspraycombustion.php.

[32] Jangi, M., et al. (2015). "On large eddy simulation of diesel spray for internal combustion engines." International Journal of Heat and Fluid Flow 53: 68-80.