1Assistant Professor, Structure and Earthquake Research Center, Amirkabir University of Technology
2Department of Civil Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
3M.Sc. of civil engineering, Amirkabir University of Technology, Iran
چکیده
Recent advances in the field of construction materials have led to development of a variety of high performance concretes like steel fiber reinforced one (SFRC). It has been proved by many researches that the addition of steel fibers can improve various properties of concrete. The compressive strength of concrete (fc) is the main mechanical property in design of reinforced concrete structures. This paper deals with estimation of compressive strength of SFRC using gene expression programming (GEP) approach. In this regard, fine aggregate to cement ratio (FA/C), coarse aggregate to cement ratio (CA/C), water to cement ratio (W/C), fiber percentage (FP), superplastizer to cement percentage (SP/C) and fiber length to diameter ratio (L/D) were considered as the most important factors affecting the compressive strength of SFRC. To extract an accurate mathematical relationship from GEP approach, a comprehensive database was collected from literature with 115 mix design of SFRC. About 80% of the gathered database was used for training the model, while the rest was utilized for testing the model. The results indicate the acceptable performance of the developed GEP-based model, as the viewpoint of statistical parameters. The absolute fraction of variances for both training and testing datasets are more than 0.98 which approve a high correlation between the predicted values of the proposed model and the experimental results. At the end, a parametric study was carried out to investigate the efficiency of the developed model in predicting the tendency of compressive strength by changing the effective input variables.
Nataraja M, Dhang N, Gupta A (1999) Stress–strain curves for steel- fiber reinforced concrete under compression. Cement and concrete composites 21 (5-6):383-390.
Niyogi SK, Dwarakanathan G (1985) Fiber reinforced beams under moment and shear. Journal of Structural Engineering 111 (3):516-527.
Khaloo AR, Afshari M (2005) Flexural behaviour of small steel fibre reinforced concrete slabs. Cement and concrete Composites 27 (1):141- 149.
Giaccio G, Tobes J, Zerbino R (2008) Use of small beams to obtain design parameters of fibre reinforced concrete. Cement and Concrete Composites 30 (4):297-306.
Mohammadi Y, Singh S, Kaushik S (2008) Properties of steel fibrous concrete containing mixed fibres in fresh and hardened state. Construction and Building Materials 22 (5):956-965.
Goldberg DE, Holland JH (1988) Genetic algorithms and machine learning. Machine learning 3 (2):95-99.
Koza JR (1992) Genetic programming: on the programming of computers by means of natural selection, vol 1. MIT press,
Ferreira Ca (2001) Gene Expression Programming: A New Adaptive Algorithm for Solving Problems. Complex Systems 13 (2):87-129.
Nazari A, Riahi S (2013) Predicting the effects of nanoparticles on compressive strength of ash-based geopolymers by gene expression programming. Neural Computing and Applications 23 (6):1677-1685.
Gandomi AH, Yun GJ, Alavi AH (2013) An evolutionary approach for modeling of shear strength of RC deep beams. Materials and structures 46 (12):2109-2119.
Gandomi AH, Alavi AH, Sahab MG (2010) New formulation for compressive strength of CFRP confined concrete cylinders using linear genetic programming. Materials and Structures 43 (7):963-983.
Baykasoğlu A, Güllü H, Çanakçı H, Özbakır L (2008) Prediction of compressive and tensile strength of limestone via genetic programming. Expert Systems with Applications 35 (1-2):111-123.
Kara IF (2013) Empirical modeling of shear strength of steel fiber reinforced concrete beams by gene expression programming. Neural Computing and Applications 23 (3-4):823-834.
González-Taboada I, González-Fonteboa B, Martínez-Abella F, Pérez-Ordóñez JL (2016) Prediction of the mechanical properties of structural recycled concrete using multivariable regression and genetic programming. Construction and Building Materials 106:480-499.
Jafari S, Mahini SS (2017) Lightweight concrete design using gene expression programing. Construction and Building Materials 139:93- 100.
Ferreira C (2002) Gene expression programming in problem solving. In: Soft computing and industry. Springer, pp 635-653.
Baran E, Akis T, Yesilmen S (2012) Pull-out behavior of prestressing strands in steel fiber reinforced concrete. Construction and Building Materials 28 (1):362-371.
Abdul-Ahad RB, Aziz OQ (1999) Flexural strength of reinforced concrete T-beams with steel fibers. Cement and Concrete Composites 21 (4):263- 268.
Mansur M, Ong K, Paramasivam P (1986) Shear strength of fibrous concrete beams without stirrups. Journal of structural engineering 112 (9):2066-2079.
Arel HŞ (2013) The effect of steel fiber on the bond between concrete and deformed steel bar in SFRCs. Construction and Building Materials 40:299-305.
Ravindrarajah RS, Tam C (1984) Flexural strength of steel fibre reinforced concrete beams. International Journal of Cement Composites and Lightweight Concrete 6 (4):273-278.
Rao TG, Seshu DR (2003) Torsion of steel fiber reinforced concrete members. Cement and concrete research 33 (11):1783-1788.
